• 제어로봇시스템학회논문지
• /
• 제6권4호
• /
• pp.261-267
• /
• 2000

In this study, a heavy-load servo-control driving system, which are composed of controller, electro-hydraulic servomechanism, hydraulic motor, reduction gearbox, turret slew bearing and turret structure, are investigated to simplify the servo-control system. To estimate the effect of each component, nonlinear modeling and simulation are carried out. In the first stage, to prove the validity of the performance estimation program, simulation results are compared with experimental results. In the second stage, the effect of each component of the control system is evaluated and then a simplified control system is suggested.

• 전력전자학회논문지
• /
• 제9권6호
• /
• pp.612-619
• /
• 2004

회전형 전동기와 볼스크류 및 타이밍 벨트를 이용한 서보 시스템은 NC, 가공기, 로봇 및 공장 자동화를 포함하여 산업 시스템 전반에 널리 사용되고 있다. 하지만, 동력의 전달에서 발생하는 비선형적인 마찰 및 댐핑현상은 제어 시스템 전체의 성능을 감소시키고, 특히 저속 정역 운전에서 그 영향이 크게 나타난다. 본 논문에서는 서보 제어시스템에서 발생하는 비선형적인 마찰 토크의 보상을 위해 가중치를 가지는 이중 제어 구조를 적용하였다. 본 논문에서 제안된 이중 제어 구조는 서보 제어 시스템에서 널리 사용되는 PI 속도 제어기 내부에 비선형적인 마찰 토크의 영향을 보상하는 내부 제어기를 가지는 구조이다. 특히, 내부의 제어기는 마찰 토크에 의한 시스템의 속도오차에 대하여 가중치를 가지는 구조로 설계되어 있고, 제어기의 이득은 외부 속도 제어기의 이득에 대하여 비례적으로 적용되므로, 안정성이 매우 높고 구조가 매우 간단하다. 본 논문에서 제안된 이중 제어 구조에 의한 비선형 마찰 토크 보상 방식은 시뮬레이션 및 실험을 통하여 그 성능을 검증한다.

• 동력기계공학회지
• /
• 제12권1호
• /
• pp.72-79
• /
• 2008

This paper designs a looper-tension controller for mass-flow stabilization in hot strip finishing mills. By Newton's 2nd law and Hooke's law, nonlinear dynamic equations on the looper-tension system are firstly derived, and linearized by a linearization algorithm using a Taylor's series expansion. Moreover, a tension calculation model is obtained from the nonlinear dynamic equations which is called as a soft sensor of strip tension between two neighboring stands. Next, a looper-tension servo controller is designed by an ILQ(Inverse Linear Quadratic optimal control) algorithm, and it is combined with a minimal disturbance observer which to attenuate speed disturbances by AGC and operator interventions, etc.. Finally, it is shown from by a computer simulation that the proposed ILQ controller with a disturbance observer is very effective in stabilizing the strip mass-flow under some disturbances, moreover it has a good command following performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.423-425
• /
• 1998

Resonance effects and nonlinear frictions which generate many problems in control system exist in almost all the servo system. therefore, In this paper, the design procedure which employs $H_{\infty}$ control theory after augmenting with two integrators is proposed to track the ramp input. Limit cycles are unavoidable by the effect of interaction between two integrators and Coulomb friction in these system. The describing function is used to check the limit cycles and decide the coefficients of two integrators to minimize the effect of the limit cycles.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.987-993
• /
• 1996

This report suggests a new non-linear friction compensation for digital control systems. This control adopts a hysteric nonlinear clement which can introduce the phase lead of the control system to compensate the phase delay comes from the inherent time delay of a digital control. The Lyapunov direct method is used to prove the asymtotic stability of the suggested control, and the stability and the effectiveness are verified analytically and experimentally on a single axis servo driving system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.718-723
• /
• 1992

A hydraulic gun/turret servo system requires fast and robust controller performance because of severe operating condition and precise target tracking objective. Digital controllers are able to satisfy this requirement due to high speed electronic device. The purpose of this study is to compare with pre-EPU with new-designed optimal, adaptive controllers by simulating nonlinear hydraulic simulation program. The designed digital controller shows good tracking performance and robustness to disturbance.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권4호
• /
• pp.47-53
• /
• 2001

This study is to investigate the problem of the SPM(Skin Pass Mil7) system which is a finishing treatment of steel sheet. and to develop a PID control scheme to minimize process instability. An electrohydraulic servo system with conventional proportional controller used to regulate the force on the strip works inadequately to yield very undesirable transient responses at the moments welding parts of the strip conte into and pass through the rolls. Both linearized and nonlinear models of a typical SPM system ware simulated first by using Simulink. Then Ziegler-Nichols ultimate cycling method was used for an initial reference guide to tune PID gains, and further fine tuning was performed to get desirable response. The test result in the plant show that proposed PID control scheme successfully improves the process instability in a SPM system.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권11호
• /
• pp.591-598
• /
• 2000

In this thesis, a digital tracking controller is proposed for multi-axis position control system. Tracking and contouring error exist when the machine tool moves along a trajectory in multi-axis system. The proposed scheme enhances the tracking and contouring performance by reducing the errors. Also, an optimal tracking controller reduces the tracking error by the state feedback and the feedforward compensator reduces the effects of a nonlinear disturbance such as friction or dead zone. The proposed control scheme reduces the contour error which occurred when the tool tracks the reference trajectory. Finally, the performance of the proposed controller is exemplified by some simulations and by applying the real XY servo system.

• 융합신호처리학회논문지
• /
• 제8권3호
• /
• pp.217-221
• /
• 2007

본 논문에서는 비선형시스템의 제어대상의 하나로 사용되고 있는 Chua회로를 대상으로 견실 출력귀환제어를 실현한다. 특히 비선형인 경우는 선형의 경우와 틀린 접근방법을 사용하여야 한다. 우선 기준신호발생기인 exosystem을 정의하고 출력추종오차식으로부터 오차방정식을 유도하고, 적분기 형태의 서보보상기를 사용하여 수정된 슬라이딩면을 설계한다. 수정된 슬라이딩면과 서보보상기에 사용되는 파라미터들은 슬라이딩면 및 서보보상기가 안정하도록 관련다항식이 Hurwitz조건을 만족하도록 정한다. 특히 모든 파라미터들이 미지여서, 오차신호들이 귀환으로부터 얻을 수 없기 때문에, 고이득 관측기를 설계하고, 이 추정값을 사용하여 안정화제어기를 얻는다. 시뮬레이션결과를 제시함으로서 알고리즘이 유용함을 증명한다.

• 유공압시스템학회논문집
• /
• 제1권1호
• /
• pp.1-9
• /
• 2004

This paper addresses an approximation and tracking control of recurrent neural networks(RNN) using two-dimensional iterative learning algorithm for an electro-hydraulic servo system. And two dimensional learning rule is driven in the discrete system which consists of nonlinear output function and linear input. In order to control the trajectory of position, two RNN's with the same network architecture were used. Simulation results show that two RNN's using 2-D learning algorithm are able to approximate the plant output and desired trajectory to a very high degree of a accuracy respectively and the control algorithm using two same RNN was very effective to control trajectory tracking of electro-hydraulic servo system.