• 제목/요약/키워드: nonlinear isotherms

검색결과 12건 처리시간 0.017초

NAPL-물 계면에서 Langmuir형 흡착특성을 보이는 계면추적자(CPC)의 다공성 균질매질내 유동특성 (Transport behavior of a surfactant tracer(CPC) with Langmuir type adsorption isotherm on NAPL-water interface in a homogeneous porous medium)

  • 김헌기;문희수;이상훈
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제6권2호
    • /
    • pp.3-13
    • /
    • 2001
  • 피흡착체에 대하여 곡선형 흡착등온곡선을 가지는 흡착체가 토양내 수용액상에서 이동할 때 직선형 흡착등온곡선을 가지는 흡착체와 다른 유동특성을 보인다는 사실은 널리 알려져 있다. 그러나 실험적으로 이와 같은 특성이 정밀하게 연구된 바는 그리 많지 않으며 특히 NAPLS(Non-Aqueous Phase Liquids)로서 오염된 지역의 NAPLs의 양과 미시적인 분포를 알아내기 위하여 사용되는 수리지질학적 추적자 기법에 대하여는 거의 실험된 바가 없다. 본 연구는 NAPL과 수용액간의 비계면적을 측정하기 위하여 사용되는 양이온계 계면활성제 (계면추적자), cetylpyridinium chloride (CPC)가 미세한 유리구슬로 충진된 스테인레스 컬럼내부를 통과하며 보이는 파과특성을 분석하였다. 유리구슬의 평균직경은 110$\mu\textrm{m}$였으며, 구슬의 표면은 n-decane의 얇은 막으로서 도포되어 있다. CPC는 유동하며 n-decane과 수용액의 계면에 흡착하게 되며, 실험결과 전형적인 Langmuir type의 흡착 특성을 보이는 것으로 나타났다. 앞부분과 뒷부분의 파과곡선은 각기 현저히 다른 양상을 보이며 이는 흡착등온곡선의 비직선적인 성격때문인 것으로 풀이된다. 또한 CPC의 지체상수는 CPC의 농도와 밀접한 함수관계가 있는 것으로 풀이된다. 또한 CPC의 지체상수는 CPC의 농도와 밀접한 함수관계가 있는 것으로 밝혀졌다. 컬럼에 투입되는 CPC가 pulse input일 때의 지체상수는 pulse input의 파과곡선상 나타나는 최대농도를 input농도로서 사용한 step input시의 지체상수와 일치하였다. 이 결과는 수리지질학적 특성치를 알아내기 위하여 최근 들어 활발히 개발되고 있는 추적자 기법을 적용하는데 있어서 일반적으로 통용되는 가정을 실험적으로 증명하였다는 데 그 의의가 있다.

  • PDF

비이온성 계면활성제를 이용한 토양내 수착된 나프탈렌의 제거 (Removal of Sorbed Naphthalene from Soils Using Nonionic Surfactant)

  • 하동현;신원식;오상화;송동익;고석오
    • 한국환경과학회지
    • /
    • 제19권5호
    • /
    • pp.549-563
    • /
    • 2010
  • The environmental behaviors of polycyclic aromatic hydrocarbons (PAHs) are mainly governed by their solubility and partitioning properties on soil media in a subsurface system. In surfactant-enhanced remediation (SER) systems, surfactant plays a critical role in remediation. In this study, sorptive behaviors and partitioning of naphthalene in soils in the presence of surfactants were investigated. Silica and kaolin with low organic carbon contents and a natural soil with relatively higher organic carbon content were used as model sorbents. A nonionic surfactant, Triton X-100, was used to enhance dissolution of naphthalene. Sorption kinetics of naphthalene onto silica, kaolin and natural soil were investigated and analyzed using several kinetic models. The two compartment first-order kinetic model (TCFOKM) was fitted better than the other models. From the results of TCFOKM, the fast sorption coefficient of naphthalene ($k_1$) was in the order of silica > kaolin > natural soil, whereas the slow sorbing fraction ($k_2$) was in the reverse order. Sorption isotherms of naphthalene were linear with organic carbon content ($f_{oc}$) in soils, while those of Triton X-100 were nonlinear and correlated with CEC and BET surface area. Sorption of Triton X-100 was higher than that of naphthalene in all soils. The effectiveness of a SER system depends on the distribution coefficient ($K_D$) of naphthalene between mobile and immobile phases. In surfactant-sorbed soils, naphthalene was adsorbed onto the soil surface and also partitioned onto the sorbed surfactant. The partition coefficient ($K_D$) of naphthalene increased with surfactant concentration. However, the $K_D$ decreased as the surfactant concentration increased above CMC in all soils. This indicates that naphthalene was partitioned competitively onto both sorbed surfactants (immobile phase) and micelles (mobile phase). For the mineral soils such as silica and kaolin, naphthalene removal by mobile phase would be better than that by immobile phase because the distribution of naphthalene onto the micelles ($K_{mic}$) increased with the nonionic surfactant concentration (Triton X-100). For the natural soil with relatively higher organic carbon content, however, the naphthalene removal by immobile phase would be better than that by mobile phase, because a high amount of Triton X-100 could be sorbed onto the natural soil and the sorbed surfactant also could sorb the relatively higher amount of naphthalene.