• Structural Engineering and Mechanics
• /
• 제64권6권
• /
• pp.731-736
• /
• 2017

Friction Pendulum isolators are tools developed in the past few decades. The simplest form of these isolators, are FPS whose main disadvantages are having a constant frequency independent of the frequency of the structure. For this reason, researchers have invented VFPI isolator whose frequency is variable and depends on displacement. Another friction pendulum isolator is DCFP isolator which is a combination of two FPS isolators. In this article, first by changing the geometry of DCFP isolator plates from spherical to elliptical, the motion and frequency equations of DVFPI isolators are defined, and then the seismic behavior of DVFPI isolators are analyzed in various geometric and plate friction settings using motion equations, and confirmed using ABAQUS software. The most important results of this study are that the hysteresis behavior of DVFPI isolators are severely nonlinear, its curve follows two distinct curvatures, and that the restoring force is faced with softening mechanism that limits the seismic force transmitted to the structure, whereas the restoring force in DCFP isolators increases linearly with increasing displacement.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.162-169
• /
• 1999

Intentionally weakened girders near the beam-to-colum connection lead ductile failures at the weakened points prior to potential brittle failure at the connection points subjected to strong earthquake. Recent research investigated cyclic behavior of composite beams with a rectangular web opening and find out ductile failure of such beams due to plastic hinge formation of T-section at the four corners of the rectangular opening. But eventual failures of T-sections are resulted from local buckling of T-section having a narrow stem and a narrow bound of plastic hinge formation. This continuing research proposes double-circular opening instead of rectangular one in ofter to improve energy dissipation capacity as well as composite beam strength, Experimental test of two specimens was carried out and its results are compared with those of nonlinear finite element analyses

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 가을 학술발표회 논문집
• /
• pp.55-60
• /
• 1990

The objective of this study is to predict the nonlinear behavior of reinforced concrete shear walls, with the reinforcement uniformly distributed, under reversed cyclic loads. This study introduces joint Element Model which formulates the pulling out of rebars, slipping and intrusion of junction planes. The applicability of this study was experimental verfied by specimens SW1, SW2 and SW3 tested by authors, Wall1 by Paulay, SW16 and SW19 by Sheu. In almost specimen, the ratio of analytical to experimental maximum shear stress is within approximately 5%. In case of energy dissipation and maximum drift, the analytical results fully coincide with those of experiment.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.182-189
• /
• 2000

This paper presents a simple and reliable constitutive model for predicting the nonlinear response of reinforced concrete subjected to general membrane loadings. Based on the concept of equivalent uniaxial strain, constitutive relations of concrete are presented in the axes of orthotropy. The behavior of cracked concrete is described by a system of orthogonal cracks, which follows the principal strain directions and rotates according to the loading history. Simple hysteretic rules defining the cyclic stress-strain curves of concrete and steel are used. In addition, the stiffness and strength degradation of cracked concrete is included in the formulation. Correlation studies between analytical results and experimental values from idealized shear panel tests are conducted with the objective to establish the validity of the proposed model.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권6호
• /
• pp.86-93
• /
• 2023

반복하중을 받는 철근콘크리트 부재는 이력거동이 진행됨에 따라 강성과 강도의 저하 그리고 핀칭현상 등으로 인하여 에너지소산 능력이 감소된다. 그러나 지침서 「철근콘크리트 건축구조물의 성능기반 내진설계를 위한 비선형해석모델, 2021」에서는 각 부재별로 모든 이력단계별 단일한 에너지소산계수를 산정하도록 하고 있어 이력단계에 따른 에너지소산능력의 감소를 고려할 수 없을 것으로 판단된다. 따라서 본 연구에서는 반복하중을 받는 일반보에 대한 기존 실험결과와 비선형시간이력해석 결과를 비교하여 이력단계에 따른 에너지소산계수를 고찰하였다. 에너지소산계수는 비선형시간이력해석 결과로 구한 이상화된 탄소성거동 에너지 소산량에 대한 실제 실험체의 에너지소산량의 비로써 산출하였다. 기존 실험결과는 1회 Cycle을 각 이력단계별로 산정하여 에너지소산계수를 도출하였으며, 지침서 내 비선형모델링 과정을 토대로 에너지소산계수를 도출하였다. 기존 실험연구에선 각 이력단계(Y-L-R)를 설정하여 에너지소산계수를 구하였으며, 에너지소산계수는 Y-L구간 0.36, L-R구간 0.28로 나타났고, 지침서 에너지소산계수는 0.31로 나타났다. 이는 지침서의 에너지소산계수 산정식이 철근콘크리트 부재의 에너지소산능력의 감소를 나타내지 못하는 것으로 나타났다.

• 한국공간구조학회논문집
• /
• 제22권4호
• /
• pp.39-48
• /
• 2022

The energy dissipation of inverted V-type eccentric steel braced frames can be achieved through the yielding of a slit link, through yielding of a number of strips between slits when the frame is subjected to inelastic cyclic deformation. On the other hand, the development of seismic resistance system without residual deformation is obtained by applying the superelasdtic shape memory alloy (SMA) material into the brace and link elements. This paper presents results from a systematic three-dimensional nonlinear finite element analysis on the structural behavior of the eccentric bracing systems subjected to cyclic loadings. A wide scope of structural behaviors explains the horizontal stiffness, hysteretic behaviors, and failure modes of the recentering eccentric bracing system. The accurate results presented here serve as benchmark data for comparison with results obtained using modern experimental testing and alternative theoretical approaches.

• Structural Engineering and Mechanics
• /
• 제69권3호
• /
• pp.243-255
• /
• 2019

Utilization of fiber beam-column element has gained considerable attention in recent years due mainly to its ability to model distributed plasticity over the length of the element through a number of integration points. However, the relatively high sensitivity of the method to modeling parameters as well as material behavior models can pose a significant challenge. Residual drift is one of the seismic demands which is highly sensitive to modeling parameters and material behavior models. Permanent deformations play a prominent role in the post-earthquake evaluation of serviceability of bridges affected by a near-fault ground shaking. In this research, the influence of distributed plasticity modeling parameters using both force-based and displacement-based fiber elements in the prediction of internal forces obtained from the nonlinear static analysis is studied. Having chosen suitable type and size of elements and number of integration points, the authors take the next step by investigating the influence of material behavioral model employed for the prediction of permanent deformations in the nonlinear dynamic analysis. The result shows that the choice of element type and size, number of integration points, modification of cyclic concrete behavior model and reloading strain of concrete significantly influence the fidelity of fiber element method for the prediction of permanent deformations.

• Computers and Concrete
• /
• 제24권3호
• /
• pp.223-236
• /
• 2019

Experience of previous earthquakes shows that a considerable portion of concrete precast buildings sustain relatively large damages especially at the beam-column joints where the damages are mostly caused by bar slippage. Precast concrete buildings have a kind of discontinuity in their beam-column joints, so reinforcement details in this area is too important and have a significant effect on the seismic behavior of these structures. In this study, a relatively simple and efficient nonlinear model is proposed to simulate pre- and post-elastic behavior of the joints in usual practice of precast concrete building. In this model, beam and column components are represented by linear elastic elements, dimensions of the joint panel are defined by rigid elements, and effect of slip is taken into account by a nonlinear rotational spring at the end of the beam. The proposed method is validated by experimental results for both internal and external joints. In addition, the seismic behavior of the precast building damaged during Bojnord earthquake 13 May 2017, is investigated by using the proposed model for the beam-column joints. Damage unexpectedly inducing the precast building in the moderate Bojnord earthquake may confirm that bearing capacity of the precast building was underestimated without consideration of joint behavior effect.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권4호
• /
• pp.1-8
• /
• 2013

철근콘크리트 구성요소에 대한 비탄성 거동 모델 개발은 철근콘크리트 구조물에 대한 성능기반 내진평가의 정밀도 향상에 있어 매우 중요한 요소로 본 연구에서는 지진과 같은 불규칙 반복 하중에 대한 철근콘크리트 구조물의 비선형 동적응답을 예측함에 있어 콘크리트 구성모델의 특성에 따른 민감도를 고찰하고자 하였다. 해석결과에 따르면 구속된 코어 콘크리트 모델과 일반 콘크리트의 구성모델은 동적응답에 큰 영향을 끼치지 않았으나 철근의 경우에 층간변위와 관련하여 구성모델에 따른 동적거동은 매우 민감하게 응답하는 것으로 나타났으며, 몇 개 층에서의 층간변위는 그 차이가 철근 구성모델 선택에 따라 2배 이상 차이 나는 것으로 나타났다. 따라서 Non-ductile과 Ductile 골조 공히 비선형 동적해석을 수행하는데 있어 정밀한 철근 구성모델의 선택은 매우 중요한 것으로 사료된다.

• 전산구조공학
• /
• 제2권3호
• /
• pp.69-75
• /
• 1989

브레이싱재를 사용하는 목적은 본 골조체계 즉 기둥과 보에 비해 단면(강성)이 작은 부재로 보강하여 횡력에 대한 강성효과를 크게 향상시키기 위함이다. 브레이싱재의 단면이 기둥과 보의 단면에 비해 월등히 작기 때문에 압축력에 의한 좌굴의 위험성과 휨량의 크기에 비례하여 부재 중앙에 발생되는 추가 모멘트(P-.DELTA. Effect)에 의한 불리한 영향 및 해석상의 어려움 때문에 브레이싱의 설계에 있어서 브레이싱재는 압축력을 받지 않는 것으로 간주하여 왔다. 그러나 최근 들어 구조물 해석에 정확도가 요구되어짐에 따라 브레이싱재의 정확한 거동에 대한 연구가 실험을 통해 활발히 진행되어 왔고, 특히 탄성한계를 지난 소성상태에서 반복하중에 의한 거동 규명이 큰 관심을 끌고 있다. 본 논문에서는 반복하중을 받는 강재 브레이싱재의 비선형 거동을 해석적 방법에 의해 규명했고, 그 결과를 실험결과와 비교하였다.