• Textile Coloration and Finishing
• /
• v.24 no.2
• /
• pp.138-144
• /
• 2012

Detergency and soil redeposition of wool fabric in 8 nonionic surfactants (Span 20, 40, 60, 80/Tween 20, 40, 60, 80) and 4 solvents (water, petroleum, perchloroethylene(PCE), decamethylcyclopentasiloxane($D_5$)) were studied. Detergency of wool fabric in water was very low with and without surfactants due to the low wetting and difficulty in penetration of water into the fabric. Lipophilic surfactants improved the detergency of wool fabric in petroleum solvent and PCE. The detergency of wool fabric in $D_5$ was similar to that in petroleum solvent without surfactants. When water was solubilized, Span 20 addition to petroleum solvent and PCE increased the detergency of wool fabric. The detergency for $D_5$ was improved with solubilized water, however, it was lowered when the surfactants were added to the system. Therefore, it is important to formulate appropriate detergents which have good solubility and affinity to silicone for $D_5$ charge system. Hydrophilic surfactants were effective for water and lipophilic surfactants were effective for petroleum solvent and PCE in soil redeposition prevention of wool fabric. The soil redeposition prevention effects are not found in $D_5$ with both Span 20 and Tween 20. The same tendency of results in soil redeposition of wool fabric is observed when water is solubilized.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.3
• /
• pp.8-14
• /
• 2008

The effects of surfactant types and the ratio of nonionic and anionic surfactants on the washing of diesel contaminated soil were investigated. In batch tests, the nonionic surfactant, which has HLB within 12-13, showed a high diesel removal efficiency and Tergitol 15-S-7 (T15S7) with 20 g/L concentration exhibited the highest removal efficiency of 79-88% among the tested nonionic surfactants. Anionic surfactants, in general, showed lower removal efficiency than nonionic surfactants. In case of mixed surfactant system, the removal efficiency increased with nonionic surfactant concentration. With mixed surfactants of T15S7 and SDS as 3 : 1 ratio, diesel removal was enhanced to 76% with 10 g/L of the mixed surfactants. These results could be used in the selection of proper surfactants for remediation of diesel contaminated soils.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.5
• /
• pp.308-311
• /
• 1988

The hydrophobic interaction occurring between rhodamine 6G and tetraphenylborate was investigated spectroscopically by varying the medium with the addition of surfactants or ethanol. The ion aggregates formed between the two ions were destroyed by the additives. The dye existed as monomeric species in the presence of a cationic surfactant whereas it was incorporated with anionic and nonionic surfactants. For the complete dissociation more than the critical micelle concentration (cmc) was required with a nonionic surfactant while less than cmc was necessary with the others.

• Journal of Environmental Science International
• /
• v.5 no.3
• /
• pp.369-376
• /
• 1996

The adsorption of the anionic surfactants, sodium lauryl sulfate (SLS) and sodium dodecylbenzene sulfonate (SDBS) anion surfactants form aqueous solutions with nonionic resins, Amberlite XAD-2, XAD-4 and XAD-7 at temperatures in 15~45$^{\circ}C$ range was studied. Several adsorption isotherm models were used to fit the experimental data, The best results were obtained with the Redlich-Peterson equation and the Freundlich model provided remarkably good fits. For a particular resin at a particular temperature, SDBS was more extensively adsorbed than SLS. The highest adsorption were obtained with XAD-4 resin and the specific surface area of the resins plays a major role in adsorption of the surfactants. Estimations of the isosteric heat of adsorption were indicative of an exothermic process, and their magnitudes manifested a physisorption process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.203-204
• /
• 2008

Using various surfactants, multi-walled carbon nanotube (MWNT) was dispersed in organic solvent, isopropylalcohol(IPA). To refine the MWNT and give the functional group, MWNT was treated with sulfuric acid/nitric acid(v/v=3/1). The cationic, nonionic and anionic surfactants were used as MWNT dispersion agents in the organic solvent. Dispersion effect of various surfactants was observed by optical microscope and HR-TEM. Surface resistivities of MWNT dispersions were measured after coating on PET film. MWNT was dispersed well by poly vinyl pyrrolidone(PVP), nonionic surfactant.

• Journal of the Korean Chemical Society
• /
• v.47 no.1
• /
• pp.19-25
• /
• 2003

A spectrophotometric method for the simultaneous determination of anionic and nonionic surfactant based on the application of multivariate calibration method such as principal component regression(PCR) and partial least squares(PLS) has been studied. The calibration models in PCR and PLS were obtained from the spectral data in the range of 400~700 nm for each standard of a calibration set of 26 standards, each containing different amounts of two surfactants. The relative standard error of prediction(RSEP$_{\alpha}$) was obtained to assess the model goodness in quantifying each analyte in a 5 validation samples which containing different amounts of two surfactants.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1546-1553
• /
• 2005

The wetting behavior and liquid transport of nonionic surfactant solutions; Span 20 and Tween 20, 40, 60, 80, 21, 61, 81, 65 & 85: in polyethylene terephthalate(PET) fabrics are reported. Five different PET fabrics are used in this study. PET 1, 2 & 3 have different compactness in structure. PET 4 & 5 have similar physical properties to PET 2, however, PET 4 has heat set finish and PET 5 with rewetting agent. The wetting and water retention properties of PET fabrics are greatly improved by addition of nonionic surfactants. The aqueous liquid retention(W) vs. cosq and W vs. adhesion tension has positive linear relationship. Hydrophilic surfactants which have short hydrophobes and surfactants with unsaturated hydrophobe structures are more efffctive in improving the wetting properties of PET fabrics. PET fabric which has larger thread spacing shows greater value of water retention ratio(W/H) than PET fabric with smaller thread spacing if there are no surfactants present in the system, however, W/H values become very similar among these PET fabrics when the surfactants are added. If there are no surfactants present in the system, PET with heat set finish has smaller value and PET with rewetting agent has greater value of W/H than PET without finish even though the fabrics have the similar physical properties.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.2
• /
• pp.205-210
• /
• 2008

The transformation of the liquid crystal complex made by binding of anionic surfactant, sodium dodecyl sulfate (SDS), into high charge density cationic polymer, the homopolymer of diallyldimethylammonium chloride (PDADMAC) was induced by adding of nonionic surfactants and investigated by means of microscopy and FE.SEM. Among nonionic surfactants in this experiments polyethylene glycol (3 mol) ether of lauryl alcohol (laureth-3) made variation in the complex. The laureth-3 transformed the complex into spherulite vesicle with the size of ca.$100{\mu}m$. This change increased the viscosity and the turbidity of the solution phase separated originally. Microscope showed that they are spherulite particles and polarized microscope suggested they are multi.lamellar liquid crystals. FE-SEM also proved that explicitly.

• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.143-149
• /
• 2009

In this study, asphalt emulsion was manufactured by phase inversion emulsification method with nonionic surfactants(Span 80, Span 60, Tween 80, and Tween 60), anionic surfactant(SLS) and cationic surfactant(Imidazole) in different feeding ratio to make up for the week points of asphalt. Its stabilization was carefully investigated with respect to droplet size, viscosity, zeta potential, and water-proofing property. When the surfactants mixed with nonionic and anionic surfactant were used into the asphalt, a stabilization of the asphalt emulsion was good. As the amount of the mixed surfactant was increased, the droplet size of asphalt emulsion were decreased, while the viscosity and zeta potential were increased. When the surfactants mixed with nonionic and anionic surfactant were used into the asphalt, a stabilization of asphalt emulsion was good.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.226-233
• /
• 2007

In this study, the effects of additives such as ionic surfactant and cosurfactant were studied on the solubilization of sulfur compounds contained in the crude oil by Tergitol series nonionic surfactants. It was found that the addition of an ionic surfactant such as sodium oleate, potassium oleate, CTAB and DTAB did not enhance solubilization capacity of Tergitol series nonionic surfactant. On the other hand, the addition of a long-chain alcohol as a cosurfactant increased the solubilization of sulfur compounds in the crude oil. The effect of alcohol was found to become reduced with an increase in the amount of crude oil used mainly due to partitioning phenomena of an nonionic surfactant. The enhancement of solubilizing capacity of Tergitol series nonionic surfactant with addition of a cosurfactant was associated with a decrease in interfacial tension between crude oil and surfactant solution. The pH of Tergitol nonionic surfactant solution did not affect the solubilization of sulfur compounds. Finally, it was found that the growth of sulfur reducing microoganisms was not greatly affected by both addition of nonionic surfactant and cosurfactant.