• 비파괴검사학회지
• /
• 제20권3호
• /
• pp.221-230
• /
• 2000

콘크리트 비파괴검사법인 충격공진법의 유용성과 적용 한계를 살펴보기 위하여 실험 및 이론적 연구를 수행하였다. 실험적 연구를 위하여, 다양한 개재물이 포함된 콘크리트 슬래브 공시체를 제작한 후 충격공진법을 적용하여 개재물의 존재 및 매실 위치를 찾아보았다. 공시체들 중 몇 경우에는 개재물의 위치를 정확하게 검출할 수 있었으나, 나머지의 경우에는 검출하지 못하였다. 후자의 경우에 있어서 그 실패 원인을 규명하고, 나아가 본 기법의 유용성을 결정하는 주요 인자들을 알아보기 위하여 유한요소 해석을 수행하였다. 본 연구는 충격공진법의 물리적 이해 증진과 향후 발전에 기여할 것이다.

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.38-46
• /
• 2005

The destructive method is reliable and widely used for the estimation of material degradation but it have time-consuming and a great difficulty in preparing specimens from in-service industrial facilities. Therefore, the estimation of degraded structural materials used at high temperature by nondestructive evaluation such as electric resistance method, replica method, Barkhausen noise method, electro-chemical method and ultrasonic method are strongly desired. In this study, various nondestructive evaluation(NDE) parameters of the Barkhausen noise method, such as MPA(Maximum Peak Amplitude), RMS, IABNS(Internal Area of Barkhausen Noise on Signal) and average amplitude of frequency spectrum are investigated and correlated with thermal damage level of 2.25cr-1.0Mo steel using wavelet analysis. Those parameters tend to increase while thermal degradation proceeds. It also turns out that the wavelet technique can help to reduce experimental false call in data analysis.

• 비파괴검사학회지
• /
• 제15권4호
• /
• pp.511-519
• /
• 1996

Cr-Mo강인 SNCM220, SCM435, SACM645 및 SCM415 강봉을 사용하여 ${\phi}31.2$ 봉 대 봉 동종재 마찰용접의 최적 조건을 실험적으로 구하였으며, 이를 위하여 이음부의 인장강도와 마찰용접 변수와의 정량적 상관식을 실험적으로 도출하였다. 한편 마찰용접시 음향방출시험을 병행하여, AE 누적총량과 마찰용접변수, 마찰용접부의 인장강도와 AE 누적총량과의 정량적 상관성을 도출하였다. 그리고, 마찰용접부의 인장파단면을 검토함으로써 용접품질을 확인하였다.

• 비파괴검사학회지
• /
• 제35권6호
• /
• pp.414-420
• /
• 2015

Concrete undergoes significant phase changes from liquid to solid states as hydration progresses. These phase changes are known as the setting process. A liquid state concrete is electrically conductive because of the presence of water and ions. However, since the conductive elements in the liquid state of concrete are consumed to produce non-conductive hydration products, the electrical conductivity of hydrating concrete decreases during the setting process. Therefore, the electrical properties of hydrating concrete can be used to monitor the setting process of concrete. In this study, a parameter identification method to estimate electrical parameters such as ohmic resistance of concrete is proposed. The effectiveness of the proposed method for monitoring the setting process of concrete is experimentally validated.

• Journal of the Korean Wood Science and Technology
• /
• 제39권5호
• /
• pp.398-405
• /
• 2011

Nondestructive evaluation (NDE) technique method using a resonance frequency mode was carried out for woodceramics made by different phenol resin impregnation ratios (40, 50, 60, 70%) for Broussonetia Kazinoki Sieb. Dynamic modulus of elasticity increased with increasing resin impregnation ratios. There was a close relationship between dynamic modulus of elasticity and static bending modulus of elasticity and between dynamic modulus of elasticity and MOR and between static bending modulus of elasticity and MOR. Therefore, the dynamic modulus of elasticity using resonance frequency mode is useful as a nondestructive evaluation method for predicting the MOR of woodceramics made by different impregnation ratios.

• 비파괴검사학회지
• /
• 제14권4호
• /
• pp.244-249
• /
• 1995

적외선을 이용한 비파괴검사 방법은 검사자가 검사체의 온도를 분석하여 검사체의 건전성을 평가할 수 있도록 개발된 방법이다. 이것이 최근에는 화력발전소 및 원자력발전소 등과 같은 다양한 산업에 적용되어 사용되고 있다. 따라서, 본 보고서는 적외선을 이용한 비파괴검사의 기초적인 원리, 적외선 측정 장비의 기본 원리 및 그것의 응용분야를 기술하였다.

• 비파괴검사학회지
• /
• 제12권1호
• /
• pp.35-39
• /
• 1992

The purpose of this report is to obtain a practical expression for estimating the compressive strength of concrete using the non-destructive method of testing combining rebound number and ultrasonic pulse velocity at the construction sites for obtaining highest accuracy in predicting the compressive strength.

• 한국해양공학회지
• /
• 제14권4호
• /
• pp.68-72
• /
• 2000

The ultrasonic method, which is well known as nondestructive test method, is widely used to evaluate the material damage due to degradation. However, this method is just used for measuring the crack size and the thickness loss of the tube. The purpose of this study is to investigate the application of the ultrasonic technique for the evaluation of marine diesel engine exhaust valve and to suggest the correlation between the ultrasonic characteristics and valve degradation. From the evaluation of the results obtained, the technique of using the ultrasonic property was founds to be a efficient method to degree of marine diesel engine exhaust valve by nondestructive test.

• 비파괴검사학회지
• /
• 제32권3호
• /
• pp.302-306
• /
• 2012

• 비파괴검사학회지
• /
• 제20권6호
• /
• pp.568-573
• /
• 2000