• Journal of Korean Society of Forest Science
• /
• v.105 no.4
• /
• pp.505-509
• /
• 2016

This study was conducted to examine the effectiveness of various dressing materials applied to tree wounds in Korea. Significantly higher wound closure rates than those of controls were found when thiophanatemethyl paste (Topsin Paste$^{(R)}$) was applied to Ginkgo biloba, Zelkova serrata, and Prunus yedoensis; lanolin to Z. serrata and P. yedoensis; and tebuconazole paste (Silvacur$^{(R)}$) to P. yedoensis. However, significantly lower wound closure rates than those of controls were found when petroleum jelly (Vaseline$^{(R)}$) was applied to G. biloba, Z. serrata, and P. yedoensis. It was noted that the wounds of Z. serrata and P. yedoensis treated with petroleum jelly expanded due to the death of cambium located at the edge of the wounds. Wound closure rates applied with adhesive - non-toxic to human body (Okong bond$^{(R)}$) were also significantly lower than those of controls in Z. serrata. Pinus densiflora showed no reaction to any experimental wound dressing because of resin secreted from the exposed cambium.

• Fire Science and Engineering
• /
• v.30 no.3
• /
• pp.67-72
• /
• 2016

The development of flame retardants aims to prevent the spread of fire and reduce the casualties caused by flammable and toxic gases generated during the combustion of building materials used in the interiors of multi-use facilities. Flame material application provides flame resistance to a silica sol in an organic-inorganic hybrid material by flame retardant adhesive or coating by producing a sol-gel method. The conventional flame retardant materials, non-flame retardant material is applied with Halogen freeway. In particular, the basic physical properties of conventional adhesive coating improves the heat resistance, enhances the durability fire and heat, and expands the halogen free flame retardant of building materials.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.5
• /
• pp.37-43
• /
• 2013

This study was focused on applying a new paper coating binder, vinyl acetate-ethylene(VAE) emulsion, with SB-latex and acrylic emulsion for paper coating application. VAE emulsion has a low monomer cost and is non-toxic chemical than conventional adhesive for paper coating such as styrene-butadiene latex( SB-latex) and acrylic emulsion. We conducted double coating in order to test VAE emulsion, which was applied on top surface only. The results showed that optical properties of the coated paper with VAE were similar with the SB-latex binders. In case of bonding strength, dry-pick of the coated paper with VAE showed almost same with other binders while wet-pick of the coated paper with VAE had a little bit lower strength than that with SB-latex.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.3
• /
• pp.59-66
• /
• 2012

Autoclaved Lightweight Concrete(ALC) features such as a high performance insulation, the fire resistance, the advantage of easy handing construction, and lightweight panels applied the curtain wall system. ALC materials are certified as non-toxic environmental and eco-friendly productions. But ALC external panels mixed with blast furnace slag pounder and silica fume have to be coated with a stucco compound or plaster because of resisting the ambient environment. This study is that mixing tests to evaluate a performance analysis of exterior paints to be make-up pigments(organic or inorganic) coated with panel surface. Testing compared by KS F 2476; flow test, KS F 2426; compression strength test, KS F 2762; bond strength test. In results, the case of the inorganic binder, ratio of alumina cement : anhydrite is 90:10 to 80:20 at the highest level of intensity. In the case of the organic binder, adhesive strength rating at surface of ALC, the pullout strength is below 0.5 $N/mm^2$ but the normal concrete is over 2.0$N/mm^2$. A contents ratio of EVA resin is more than 3% and then bond strength is effectively.