• 공업화학
• /
• 제33권4호
• /
• pp.367-372
• /
• 2022

폴리염화비닐(polyvinylchloride, PVC)-tetrahydrofuran (THF) 용액에 PVC 비용매의 첨가와 박막 건조 공정이 PVC 박막에 미치는 영향을 분석하였다. 사용된 비용매는 알코올과 비알코올계로 구성되었으며, 첨가에 따른 PVC 박막의 표면 거칠기와 표면 형상의 차별성에 따른 소수성 성질을 비교하였다. PVC-THF 용액 제조과정에 발생하는 용액 내 기포 함유가 박막의 표면 구조에 미치는 영향이 큼을 확인하였다. 상대적인 고농도 PVC-THF 용액에서 코팅 박막의 정상적 표면 물성을 구현하기 위하여 적절한 박막 건조법의 선택이 요구된다. 알코올계 비용매를 첨가할 경우 과립형 형상의 다공성 표면을 갖는 PVC 박막이 얻어져 초소수성 특성을 보인다. 비용매에 대한 PVC-THF 용액의 부피 비는 코팅 박막의 표면 형상에 영향을 주며, 비용매 첨가량이 많을수록 초소수성 PVC 박막을 형성하는 데 유리하다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 추계 총회 및 학술발표회
• /
• pp.212-215
• /
• 2004

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 춘계 총회 및 학술발표회
• /
• pp.81-85
• /
• 2002

Small angle light scattering and field emission scanning electron microscope have been used to quantify the kinetics of liquid-liquid separation behavior during water vapor(RH52%[$\pm$3%] at 27$^{\circ}C$) quenching (non-solvent induced phase separation, NIPS) of polysulfone/NMP/Alcohol and CPVC/THF/Alcohol, respectively. Time dependence of the position of the light scattering maximum was observed at polysufone dope solutions, confirming spinodal secomposition (SD). while CPVC dope solutions showed a decreased scattered light intensity with a increased q-valuel, indicating nucleation & growth (NG). For the each system, domain growth rate in the intermediate and late stage of phase separation decreased with increasing the number of carbon of alcohol used as additive (non-solvent). Also, in the early stage for SD, the scattering intensity with time was in accordance with Cahns linear theory of spinodal decomposition,[1-3] regardless of types of non-solvent additive.

• 한국산업보건학회지
• /
• 제6권2호
• /
• pp.209-221
• /
• 1996

The purpose of this study was to find a suitable cosolvent to $CS_2$ so that desorption efficiency can be improved for both polar and non-polar organic solvent mixtures collected on an activated charcoal tube. Cosolvents added to $CS_2$ include: DMF(N,N-dimethylformamide): $CS_2$ (v/v 1:99), DMF:$CS_2$(v/v 3:97), BC (butyl carbitol, 2-(2-butoxy ethoxy) ethanol):$CS_2$(v/v 1:99), and BC:$CS_2$(v/v 3:97)). The results obtained were as follows : 1. Comparing the desorption efficiency of $CS_2$ with those of $CS_2$ with 1, 3, 5 % DMF and 1, 3 % BC cosolvents for two different groups of charcoal tubes each containing 8 different polar and non-polar organic solvents with 3 different concentration levels, the desorption efficiencies of the cosolvent-added $CS_2$ increased significantly for all polar organic solvents regardless of concentration levels tested. For non-polar organic solvents, no noticeable improvement was detected except xylene and trichloroethylene. The desorption efficiency of xylene increased significantly while that of trichloroethylene increased significantly at the lowest concentration level tested. 2. Either 5 % DMF or 3 % BC was the most suitable cosolvent because the desorption efficiency for non-polar organic solvent mixtures was similar or slightly improved compared with that of $CS_2$, while those of for polar organic solvent mixtures were above 75 % except for cyclohexanone. 3. The smallest variations in desorption efficiency represented by the ratio calculated from the maximum to minimum desorption efficiency for all concentration levels tested were found when 3 % BC was used as a cosolvent. The above results indicate that the desorption efficiency of $CS_2$ particularly for polar organic solvent mixtures collected on a charcoal tube can be significantly improved by the use of cosolvents such as 5 % DMF or 3 % BC. A caution, however, is in order for selecting a cosolvent whenever the cosolvent itself is being used in the workplace or the impurities contained in the cosolvent may interfere with the analytical results. In addition, to improve desorption efficiencies for such organic solvents as cyclohexanone or ketones, it is recommended to use suitable collection and desorption media other than the traditional method of charcoal tube collection/$CS_2$ desorption.

• 한국세라믹학회지
• /
• 제43권10호
• /
• pp.635-639
• /
• 2006

Dispersion behavior of the slurries consisted of Pb or Bi-based glass frits, which are used for the fabrication of green sheet as PDP front panel transparent dielectric, was examined in non-aqueous solvent system. Measurements of sedimentation height and viscosity were conducted to determine proper dispersion condition in the various solvent and dispersant system. Azotropic compound and ethyl acetate were used as the solvent and ammonium-type dispersant was applied to the slurries. All slurries were dispersed well in azotropic solvent system involving 20$\sim$50 vol% ethyl acetate at 2$\sim$3 wt% dispersant content. Especially, dispersion behavior was notably improved in the addition of ethyl acetate in the Bi-based frit slurry.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권1호
• /
• pp.57-62
• /
• 2003

An effort was made to assess comparative production performance in broiler chickens fed diets containing solvent extracted cottonseed meal (CSM) processed from BT and Parental Non-BT lines. Processed meal of national check and commercial produce cottonseeds were also used for comparison. The free gossypol contents were 0.02, 0.02, 0.44 and 0.03% in meals of BT, Parental Non-BT, national check and commercial produce cottonseeds, respectively. Day-old broiler chicks (n=243) were divided to 27 groups of 9 each. Nine dietary treatments (iso-nitrogenous, 23% CP and iso-caloric, 2,800 kcal ME/kg) were formulated viz., D1 (control, soybean meal-SBM based), D2 and D3 (BT CSM at 10% of diet with and without additional iron), D4 and D5 (non-BT CSM with and without additional iron), D6 and D7 (national check CSM with or without additional iron), and D8 and D9 (commercial produce CSM with or without additional iron at 2 ppm for every 1 ppm of free gossypol, respectively). Each dietary treatment was offered to three replicated groups up to 6 weeks of age. At the end of 6 weeks of age, 10 birds were taken out randomly from each treatment and were sacrificed to study carcass traits, organs' yield and histo-pathological changes in vital organs. The broiler chickens received CSM processed from BT (D2, 1,753 g and D3, 1,638 g) and Parental Non-BT (D4, 1,653 g and D5, 1,687 g) with or without additional Fe grew at same rate as observed in soybean meal (solvent ext.) based diet (D1, 1,676 g). The feed intake and feed conversion efficiency (feed: gain) in these dietary treatments (BT, non-BT line based diets) also did not differ significantly (p>0.05) from control diet. Similar observation was also observed in dietary treatments (D8 and D9) containing solvent extracted cottonseed meal of commercial produce origin. However, a decrease (p<0.05) in body weight gain and feed intake was observed in D6 containing national check CSM with high gossypol content. Addition of Fe in the diet (D7) improved (p<0.05) feed intake and weight gain but not to the extent as observed in diets containing BT, parental non-BT, and commercial produce CSM or control. However, any type of CSM did not affect feed conversion efficiency when fed with or without additional iron. The carcass characteristics in terms of dressing percentage, liver weight and heart weight was not significantly (p>0.05) different between the treatments. The eviscerated yields emanated from diets containing either BT, non-BT or commercial produce were statistically similar to control. However, eviscerated yield of broilers fed national check CSM with or without iron supplementation was lower (p<0.05) than BT cotton with Fe supplementation and commercial produce CSM. The study envisaged that BT, parental non-BT and commercial produce solvent extracted cottonseed meal can be included at 10% in soybean meal based broiler diet replacing soybean meal and rice bran without additional iron.

• Journal of Pharmaceutical Investigation
• /
• 제34권1호
• /
• pp.29-34
• /
• 2004

The solubility and stability of quercetin in various vehicles were determined. The solubility of quercetin at $28^{\circ}C$ increased in the rank order of isopropyl myristate < oleyl alcohol < propylene glycol monolaurate < oleoyl macrogol­6 glycerides < linoleoyl macrogol-6 glycerides < propylene glycol laurate (PGL) < propylene glycol monocaprylate (PGMC) < polyethylene glycol-8 glyceryl linoleate < caprylocaproyl macrogol-6 glycerides < diethylene glycol mono ethyl ether (DGME). The addition of DGME to non-aqueous vehicles such as PGL ad PGMC markedly increased the solubility of quercetin. From the stability studies, it was found that quercetin was unstable due to rapid oxidation by dissoved oxygen. The addition of a combination of ascorbic acid and edetic acid (EDTA) at 0.1 % markedly decreased the degradation rates of quercetin in 40% polyethylene glycol 400 in saline. Quercetin was relatively unstable in non-aqueous vehicles such as PGL and PGMC alone, and PGL-PGMC co-solvent The degradation of quercetin in such non-aqueous vehicles was fast, depending on temperature. The addition of butylated, hydroxytoluene, butylated hydroxyanisole, citric acid and/or EDTA at 0.1 % was effective in retarding the degradation of quercetin.

• 분석과학
• /
• 제24권2호
• /
• pp.94-104
• /
• 2011

본 연구에서는 양쪽성 메조 다공성 실리카를 다양한 조건(용매, 계면활성제와 올리고머의 량, 용액의 pH)에서 합성하였다. 메조 다공성 실리카를 사용하여 염소 소독으로 인해 음용수 중에 미량 존재하는 변이원성 물질인 MX (3-chloro-4-(dichloromethyl)-5-hydroxy-2-(5H)-furanone)의 흡착에 관한 특성을 연구하였다. 소수성과 친수성의 양쪽성 폴리우레탄 올리고머를 사용하여 합성된 메조다공성 실리카의 경우 뛰어난 흡착특성을 나타내었다. 그리고 보조 계면 활성제의 경우에는 비이온성이며 분자량이 큰 폴리 에틸렌 프로필렌 옥사이드(PEO-PPO)를 사용하여 합성된 메조 다공성 실리키가 가장 좋은 흡착 특성을 보였다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제14권E호
• /
• pp.27-40
• /
• 1998

The solubility characteristics of organic compounds were studied in terms of the extraction efficiency as a function of the polarity of the organic solvent, and the acidity of water in urban aerosol samples collected in University of East Anglia (UEA), Norwich, England. The extraction efficiency of organic compounds were evaluated with respect to the organic carbon, -nitrogen and -hydrogen by means of a wide range of solvent which include polar and nonpolar organic solvents as well as acids and alkaline water. In addition, after being dissolved in aqueous solution, the aqueous chemistry of organic compounds were studied in terms of the organic metal complexes in aerosol, which were studied with oxalic acid, copper, and zinc. The results of this study indicate that solubility characteristics of organic compounds depend on the polarity of the solvents and the acidity of the solvents. In particular, some organic compounds are water soluble, even though they are much smaller than acetone soluble fractions. In the comparison between polar organic solvent extraction and non- polar organic solvent extraction, it can be thought that significant fraction of organic compounds analysed in the aerosol samples, are polar organic compounds because of the higher extraction efficiencies of organic compounds in polar organic solvent extraction than in nonpolar organic solvent extraction. Regarding the study of the oxalic -metal complexes, it can be thought that most oxalic acids are present in the form of oxalic -copper complexes in the aerosols collected at UEA.

• 한국분말재료학회지
• /
• 제10권1호
• /
• pp.6-14
• /
• 2003

The purpose of the present study is to investigate the method decreasing debinding time as well as lowering operation condition than pure supercritical $CO_2$ debinding by using cosolvent or binary mixture of propane + $CO_2$. First method is to add cosolvent, such as n-hexane, DCM, methanol, 1-butanol, in supercritical $CO_2$. In case of adding cosolvent, we were found the addition of non-polar cosolvent (n-hexane) improves dramatically the binder removal rate (more than 2 times) compared with pure supercritical $CO_2$ debinding, second method is to use mixture of supercritical propane + $CO_2$, as solvent. In case of using mixture of supercritical propane + $CO_2$, the rate of debinding speeded up with increasing of pressure and concentration of propane at 348.15 K. It was found that addition of cosolvent (e.g., n-hexane, DCM) and binary mixture propane + $CO_2$ for supercritical solvent remarkably improved binder removal rate for the paraffin wax-based binder system, in comparison with using pure supercritical $CO_2$.