• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.357-364
• /
• 2001

This study deals with the effect on non-martensitic layer on the fatigue strength in carburized gear. The test gears are carburized, then treated by the combination of chemical polishing and electro-polishing. Carburization treatment is used widely on parts of power transmission system like surface hardened layer to improve fatigue strength. Carburized gears are observed using a scanning electron microscope(SEM) to determine the characteristics of crack initiation mechanism in the surface layer. The constant street amplitude fatigue test is performed by using and electro-hydraulic servo-controlled pulsating tester. The S-N curves are obtained and illustrated. The effect of non-martensitic layer on the fatigue strength is clarified.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권5호
• /
• pp.641-647
• /
• 2003

The use of infrared range-finder sensor as the environment recognition system for mobile robot have the advantage of low sensing cost compared with the use of other vision sensor such as laser finder CCD camera. However, it is not easy to find the previous works on the use of infrared range-finder sensor for a mobile robot because of the non-linear characteristic of that. This paper describes the error due to non-linearity of a sensor and the correction of it using neural network. The neural network consists of multi-layer perception and Levenberg-Marquardt algorithm is applied to learning it. The effectiveness of the proposed algorithm is verified from experiment.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권5호
• /
• pp.657-665
• /
• 2003

Combined De-NOx Process in which $NH_3$ SCR (Selective Catalytic Reduction) and non-thermal Plasma Process are simultaneously used, has been investigated with a pilot test facility. The pilot test facility treats the combustion flue gases exhausted from a diesel engine that generates 240 kW of electrical power. Test results show that up to 80 % of NOx (NO and NO2) can be removed at 100 - $200^{\circ}C$. None of conventional De-NOx techniques works under such low temperature range. In addition to NOx. the Pilot test results show that soot can be simultaneously treated with the present non-thermal plasma technique. The present pilot test shows that the electrical power consumption to operate the non-thermal plasma reactor is equivalent to 3 - 4 % of the electrical power generated by the diesel engine.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권4호
• /
• pp.443-450
• /
• 2009

This study has dealt with the ice making characteristics in a rectangular vessel cooled from below direction with experiment and numerical analysis. The experiment and numerical analysis were carried out under the following conditions which are the cooling wall temperatures of -5[$^{\circ}C$], -10[$^{\circ}C$], and -15[$^{\circ}C$]. The temperature profile of non-frozen layer was calculated by numerical analysis as the form of non-dimensional temperature. From this study, it is cleared that the existence of natural convection is clearly known. And also the non-dimensional freezing amount was derived from experimental result. This correlation equation will give a useful information to the designers of ice making system.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.325-342
• /
• 2020

The current study is focused on the evaluation of the ultimate strength of stiffened panels found in ship hull structures that are subjected to combined uniaxial thrust, in-plane and out-of-plane bending moments. This loading condition, which is in general ignored when performing buckling checks, applies to representative control geometries (stiffener with attached plating) as a consequence of the linearly varying normal stresses along the ship's depth induced by the hull-girder vertical bending moment. The problem is generalized by introducing a non-uniform thrust described by a displacement ratio and rotation angle and by introducing the slenderness ratios, within the practical range of interest. The formed design space is explored through methods sourcing from Design of Experiments and by applying non-linear finite element procedures. Surrogate empirical models have been constructed through regression analysis and Response Surface Methods. An additional empirical model is provided to the literature for predicting the ultimate strength under uniaxial thrust. The numerical experimentation has shown that is a significant influence on the ultimate strength of stiffened panels as the thrust non-uniformity increases.

• 제어로봇시스템학회논문지
• /
• 제22권8호
• /
• pp.619-626
• /
• 2016

This paper proposes the design and performance evaluation of a marine engine fault detection system using a proximity sensor for marine engine. Non-linearity is greatly reduced by using the sensor without increasing the response time by applying the CANopen protocol. The CANopen protocol enables the sensor to send initial values and measurement data. The marine engine fault detection system measures crankshaft deflection and the bottom dead center of the crosshead in real-time, which maintains stability and prevents the serious breakdown of the marine engine by use of an interlocking alarm monitoring system.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권11호
• /
• pp.1564-1567
• /
• 2001

Hydrolysis of plant protein to non-protein nitrogen (N) or ammonia can reduce quality of silage crops. Heating or non-enzymatic browning is a treatment to inhibit this hydrolysis. This experiment was conducted to examine the effects of pre-heated soybean meal and molasses on the fermentation quality of napiergrass silage. The initial growth of napiergrass was harvested at 85 days of age and immediately chopped into about 1 cm length. About 700 g of the grass was ensiled into a laboratory silo (1.0 liter polyethylene container) and incubated for 30 days at room temperature ($28^{\circ}C$). No additives (control), molasses, soybean meal and molasses + soybean meal treatments were prepared. All additives were non-heated or heated in an oven at $150^{\circ}C$ for 30 minutes before ensiling. Molasses was added at 3% on the fresh weight basis and soybean meal was added at 0.5% N, respectively. After opening the silo, pH, total nitrogen (TN), volatile basic nitrogen (VBN), lactic acid (LA), acetic acid (AA), butyric acid (BA) and dry matter (DM) contents were determined. The data were analyzed statistically by analysis of variance. Compared with control, molasses addition significantly decreased pH value, VBN/TN, AA and BA and increased LA production. Soybean meal addition significantly increased TN and VBN/TN of silage. Both molasses and soybean meal addition significantly reduced pH value, AA, and BA and increased DM and LA contents of silage. The heating of additives was only effective to reduce VBN/TN production compared with non-heated additives in soybean meal and soybean meal with molasses addition.

• Journal of Radiation Protection and Research
• /
• 제41권1호
• /
• pp.1-6
• /
• 2016

Background: It is very difficult to set a regulatory guidance or criteria for the protection of non-human species from the ionizing radiation, because there are no generally or internationally accepted methods for demonstrating the compliance with such criteria. It is needed that Korea develop the primary dose rate standards for the protection of both aquatic and terrestrial biota in the near future. Materials and Methods: The potential dose rates due to both external and internal radiation exposures to marine organisms such as plaice/flounder, gray mullet, and brown seaweed collected within territorial seas around the Korean Peninsula were estimated. Results and Discussion: The total dose rates to plaice/flounder, gray mullet and brown seaweed due to $^{40}K$, a primordial radionuclide in marine environment, were found to be 0.2%, 0.08% and 0.3% of approximately the values of the Derived Consideration Reference Levels (DCRLs, i.e. $1-10mGy{\cdot}d^{-1}$), respectively, as suggested by the International Commission on Radiological Protection (ICRP) publication 124. The total dose rates to marine fishes and brown seaweed due to anthropogenic radionuclides such as $^{90}Sr$, $^{137}Cs$ and $^{239+240}Pu$ were considered to be negligible compared to the total dose rate due to $^{40}K$. The external exposure to benthic fish due to all radionuclides was much higher than that of pelagic fish. Conclusion: From this study, it is recommended that the further study is required to develop a national regulatory guidance for the evaluation of doses to non-human species.

• Fisheries and Aquatic Sciences
• /
• 제25권5호
• /
• pp.264-275
• /
• 2022

A non-destructive environmental DNA protocol for the genetic analysis of sea cucumber (Apostichopus japonicus) resources DNA was established. Among the several commercial DNA extraction kits, the DNeasy^® Plant Mini Kit was selected as the best choice to obtain the high-quality genomic DNAs from the mucous sea cucumber. As the temperature and incubation time increased, the amount of extracted environmental DNA was also large, but it was judged that the increased amount did not affect as much as 2-3 times. Therefore, these conditions were not considered to be the main factors to consider in actual environmental DNA extraction. However, the amount of seawater relative to the size of the sample was judged as a major consideration, and a sufficient amount of environmental DNA for analysis was secured when stored within 1 min while stirring the volume of seawater corresponding to the total sea cucumber weight (g). In securing the environmental DNA of sea cucumbers, the mortality rate of sea cucumbers in all experiments was 0, and it was judged that the effects of sea cucumbers were not significant through this treatment. Through the results of this study, sea cucumber DNA research, which has been conducted in a destructive method, can be conducted non-destructively through environmental DNA analysis. Through this study, we have secured a standard protocol that can successfully extract the sea cucumber DNA through environmental DNA. It is not only excellent in terms of time and cost of traditional DNA analysis method currently used, but it is completely non-destructive in the ecosystem of the survey area. It is believed that the system can be transformed in a way that does not affect it. However, it is thought that various standard protocols should be established considering the characteristics of each type.

• 한국어병학회지
• /
• 제29권1호
• /
• pp.1-5
• /
• 2016

Isopods are parasitic crustaceans that pose serious threat to fisheries. Several studies have tried to explore the host-pathogen relationship between marine fishes and isopods. The present study aims to understanding the secondary infections in marine fishes pertaining to isopods. To assess the secondary infection in infected fishes, parasite infested and healthy tissues of fishes were collected. The samples were subjected to standard microbiological procedure to identify the presence of pathogenic bacteria and fungi. Our results showed the branchial region had the higher microbial load of non-sporulating cenocytic fungi in infected fishes. Moreover, fungal strains isolated from the parasitic lesion confirmed that the parasitation and body lesion facilitates the entry of several pathogenic microbes at the damaged host tissue. More over the immune regulation of fish fights back by producing minute cysts, trying to encapsulate the growing fungus. But this may eventually lead to systemic infestation and death of the fish.