• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.3
• /
• pp.293-300
• /
• 2007

The aim of this paper is to design a speed controller of a DC motor by selection of a PID parameters using genetic algorithm. The model of a DC motor is considered as a typical non-oscillatory, second-order system, And this paper compares three kinds of tuning methods of parameter for PID controller. One is the controller design by the genetic algorithm. second is the controller design by the model matching method third is the controller design by Ziegler and Nichols method. It was found that the proposed PID parameters adjustment by the genetic algorithm is better than the Ziegler & Nickels' method. And also found that the results of the method by the genetic algorithm is nearly same as the model matching method which is analytical method. The proposed method could be applied to the higher order system which is not easy to use the model matching method.

• International Journal of Automotive Technology
• /
• v.6 no.3
• /
• pp.205-213
• /
• 2005

This study deals with the result of exhaust emissions and performance calculated by simulation of the fuel injection characteristics of the inline injection system in a marine diesel engine. The emissions are calculated through non-equilibrium by using the extended Zel'dovich kinetic mechanism for NOx and equilibrium method for OH, CO, $H_2$, Hand soot concentrations. Comparisons of the model predictions with the experimental values show reasonable agreement. Detailed prediction results showing the sensitivity of the model by injection rates are presented and discussed.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.05a
• /
• pp.11-15
• /
• 2000

This paper provides a basic study on automatic of a trailer type vehicle which consists of two parts such as a tractor and a trailer Backward moving and parking control is very important to automate this type of vehicle. However it is very difficult to control such their motion since a trailer type vehicle is a non-holonomic system. Therefore in this paper we propose the backward path tracking control algorithm for a trailer type vehicle. And also this paper presents the results of simulation to verify the effectiveness of the proposed control algorithm.

• Advances in Traditional Medicine
• /
• v.7 no.2
• /
• pp.171-181
• /
• 2007

Metal binding activity of the pectin samples with different physicochemical properties was studied. It was found that in vitro copper binding capacity of pectins is depending on the following factors: degree of esterification, content of non-methylated anhydrogalacturonic acid, and pH of solution. There was found that the maximum copper uptake capacity increases correspondingly to reduction of the degree of esterification of pectin, rise of the non-methylated anhydrogalacturnic acid content and the solution pH. It is proposed to use for standardization of pectin samples such parameters as the degree of esterification, content of anhydrogalacturonic acid, and intrinsic viscosity.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.279-280
• /
• 2006

In the present study the flow fields around pitching foils have been visualized by using a Schlieren method with a high speed camera in a wind tunnel at low Reynolds number regions. It has been observed that small vortices are shed discretely from the leading and trailing edge and that they stand in line on the integrated streakline of separation shear layer. By counting vortices in the VTR frames it was clarified that the number of vortex shedding from the leading and trailing edge during one pitching cycle strongly depends on the non-dimensional pitching rate.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.3
• /
• pp.29-35
• /
• 2000

The present numerical study investigates heat transfer enhancement mechanism for suspensions of polystyrene particles in water. Numerical simulations were done for turbulent hydrodynamic fully developed flows in a circular duct with constant wall heat flux. The experimental result of microparticle suspensions show 25∼45% heat transfer enhancement over those of water. The present numerical results show the main parameter for the heat transfer enhancement of microparticle suspension in a circular duct is the change of velocity profile by the non-Newtonian fluid behavior.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.8
• /
• pp.981-994
• /
• 2014

Density currents formed by buoyancy discharges from rivers are numerically studied using non-dimensional two layer model including Coriolis acceleration, bottom stress, interfacial friction. Some typical numbers such as Froude number, densimetric Froude number and Kelvin number are obtained and some characteristic scales are defined as a result of non-dimensionalization of the governing equations. Besides the Coriolis effect, the configurations of bottom topography, bottom friction coefficient and interfacial friction are found to significantly affect the propagation of the warm water plume. Frontal position can fastly propagate in the case of large density difference between the two layers and small interfacial friction. Left side boundary current is easily formed under the small interfacial friction. With large Kelvin number, both right and left side boundary currents are formed. Wave-like disturbances and eddies are easily formed under the high Froude number.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.2
• /
• pp.116-116
• /
• 1996

This paper is concerned with a method for calibrating five-hole probes of both angle-tube and prismatic geometries to measure local total and static pressures and the magnitude and direction of the mean velocity vector. Descriptions of the calibration technique, the typical calibration data, and an accompanying discussion of the interpolation procedure are included. The flow properties are determined explicitly from measured probe pressures using calibration data. Flow angles are obtained within the deviation angle of 1.0 degree and dynamic pressures within 0.03 with 95% certainty. The variations in the calibration data due to Reynolds number are also discussed. For the range of Reynolds number employed, no effect was detected on the pitch, yaw and total pressure coefficients. However, the static pressure coefficient showed change to cause minor variations in the magnitude of the calculated velocity vector. To account for these variations, average correction factors need to be incorporated into the static pressure coefficient.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.2
• /
• pp.48-56
• /
• 1996

This paper is concerned with a method for calibrating five-hole probes of both angle-tube and prismatic geometries to measure local total and static pressures and the magnitude and direction of the mean velocity vector. Descriptions of the calibration technique, the typical calibration data, and an accompanying discussion of the interpolation procedure are included. The flow properties are determined explicitly from measured probe pressures using calibration data. Flow angles are obtained within the deviation angle of 1.0 degree and dynamic pressures within 0.03 with 95% certainty. The variations in the calibration data due to Reynolds number are also discussed. For the range of Reynolds number employed, no effect was detected on the pitch, yaw abd total pressure coefficients. However, the static pressure coefficient showed change to cause minor variations in the magnitude of the calculated velocity vector. To account for these variations, average correction factors need to be incorporated into the static pressure coefficient.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.8
• /
• pp.1279-1285
• /
• 2004

This paper presents the characteristic simulation of PM-type magnetic circuit breaker with the 2D finite element magnetic field solution including non-linearity of the material and an eddy current. Change of dynamic characteristic of the actuator is quantified from the finite element analysis. The results obtained from a commercial finite element analysis software are compared with those calculated from the developed finite element analysis software. A new modified model to decrease the eddy current is proposed. The characteristics of the two models are compared.