• 기록학연구
• /
• 제50호
• /
• pp.389-423
• /
• 2016

이 논문은 2009년 제정된 일본의 "공문서등의 관리에 관한 법률"의 영향으로 새롭게 변화하고 있는 지방 기록관리의 모습을 도도부현과 정령지정도시의 사례 연구 방식을 통해서 구체적으로 포착하고자 하였다. 일본 지방자치체에서의 기록관리는 지금까지 기록관리에 관한 기본법이 존재하지 않았던 상황에서 행정기관 내부의 '문서관리규정'에 근거하여 이루어졌다. 법 제정을 계기로 지방에서도 '법률의 취지'를 반영한 '적정한 기록관리'를 실현하기 위한 기록관리 법령 정비와 아카이브 정비가 추진되었다. 지방마다 처한 조건으로 인해 그 내용과 수준에서 차이를 보이지만, 기록관리 조례의 제정을 통해서 법에서 규정한 '현용과 비현용을 아우르는 일원적인 기록관리체계'를 도입하고 있으며, 이 과정에서 지방아카이브의 기록관리에 관한 권한과 기능의 강화 확대를 꾀하였다. 또한 기록물처리일정표와 기록목록의 공표, 제3자적 관점 확보 위한 공문서관리위원회의 운영 등을 통해 조례에서 정한 기록관리 내용의 법적 준수를 철저하게 지킨다. 이러한 일본의 지방자치체의 변화는 행정기관의 기록이 주민공유의 지적재산이라는 점과 이를 적정하게 관리하여 주민에 대한 설명책임을 달성하려는 공문서관리법의 취지를 충실하게 반영한 것이다.

• Structural Engineering and Mechanics
• /
• 제31권5호
• /
• pp.567-585
• /
• 2009

The aim of this study was to investigate the flexural behavior of reinforced concrete beams strengthened with a novel strengthening system. Concrete beams were strengthened with a hybrid retrofit system consisting of high strength steel cords impregnated in an inorganic fireproof matrix (Geopolymer). The strengthened reinforced concrete beams along with non-strengthened control beams were tested monotonically under four point bending loading conditions. Moreover, an analytical model is introduced, that can be used to analyze the flexural performance of the strengthened beams. The experimental results indicate that the failure of the strengthened beams was based on the yielding of the reinforcement in the tension face of the beams, followed by a local slippage of the steel cords. The flexural stiffness of the strengthened beams was significantly improved compared to the stiffness of the non-strengthened beams. In conclusion, the strengthening system can provide an effective alternative to commercially available systems.

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.7-11
• /
• 2020

Enormous methods have been proposed for the detection and segmentation of blur and non-blur regions of the images. Due to the limited available information about the blur type, scenario and the level of blurriness, detection and segmentation is a challenging task. Hence, the performance of the blur measure operators is an essential factor and needs improvement to attain perfection. In this paper, we propose an effective blur measure based on the local binary pattern (LBP) with the adaptive threshold for blur detection. The sharpness metric developed based on LBP uses a fixed threshold irrespective of the blur type and level which may not be suitable for images with large variations in imaging conditions and blur type and level. Contradictory, the proposed measure uses an adaptive threshold for each image based on the image and the blur properties to generate an improved sharpness metric. The adaptive threshold is computed based on the model learned through the support vector machine (SVM). The performance of the proposed method is evaluated using a well-known dataset and compared with five state-of-the-art methods. The comparative analysis reveals that the proposed method performs significantly better qualitatively and quantitatively against all the methods.

• Steel and Composite Structures
• /
• 제51권5호
• /
• pp.563-573
• /
• 2024

This research experimentally evaluated the local stress distribution along the cross-section of composite beams under both positive and negative moments. The experiment utilized a large-scale, two-story, two-by-three bay steel gravity frame with a concrete on metal deck floor system. The composite shear connections, which are nominally assumed to be pinned under gravity loading, can develop non-negligible moment-resisting capacity when subjected to lateral loads. This paper discusses the local stress distribution, orshear lag effects, observed near the beam-to-column connections when subjected to combined gravity and lateral loading. Strain gauges were used for measurements along the beam depth at varying distances from the connection. The experimental data showed amplified shear lag effects near the unconnected region of the beam web and bottom flange under the applied loading conditions. These results indicate that strain does not vary linearly across the beam cross-section adjacent to the connection components. This insight has implications for the use of experimental strain gauge data in estimating beam demands near the connections. These findings can be beneficial in informing instrumentation plans for future experimental studies on composite beams.

• 대한수학회보
• /
• 제53권4호
• /
• pp.1259-1280
• /
• 2016

The paper deals with lightlike hypersurfaces which are locally symmetric, semi-symmetric and Ricci semi-symmetric in indefinite Kenmotsu manifold having constant $\bar{\phi}$-holomorphic sectional curvature c. We obtain that these hypersurfaces are totally goedesic under certain conditions. The non-existence condition of locally symmetric lightlike hyper-surfaces are given. Some Theorems of specific lightlike hypersurfaces are established. We prove, under a certain condition, that in lightlike hyper-surfaces of an indefinite Kenmotsu space form, tangent to the structure vector field, the parallel, semi-parallel, local symmetry, semi-symmetry and Ricci semi-symmetry notions are equivalent.

• 한국해양공학회지
• /
• 제9권1호
• /
• pp.22-35
• /
• 1995

A simplified numerical procedure have proposed to trace the dynamic behaviour of offshore tubulars subjected to lateral collision impacts. The local denting and overall bending deformation of the struck tubular are represented by a non-linear spring and an elastic visco-plastic beam respectively. In this method a temporal finite difference method and a spacial finite element method are employed. Using this method various boundary conditions are able to considered and their effects on the extent of damage can be quantified. The extent of damage due to collision can be obtained as results of the dynamic analysis. The predictions using the proposed method have been correlated with existing test results and then the reliability of the procedure has been substantiated. The characteristics of the dynamic response of tubulars under lateral impacts are compared for simply supported roller and fixed end conditions and their effects on the extent of damage are specfied.

• 수산해양교육연구
• /
• 제20권3호
• /
• pp.369-380
• /
• 2008

The government has promoted the local fishing port construction project since 1972 for conquest of the crisis of the fishing village by withering of a fishery, the improvement in fishermen's living environment and quality of life, and promotion of fisheries. In order to estimate the local fishing port construction project objective and synthetically, and to grope for the method proposal of system establishment of the project, the monitoring survey was carried out. The monitoring survey was classified into the program and the performance monitoring. The program monitoring was carried out in order to investigate the project fit for the inhabitants of a fishing village. The performance monitoring was carried out in order to investigate the development latent powers, fishery latent powers, tourism latent powers of a fishing village, rural settlement conditions, etc. using various statistical materials. Since investigating the measured value before executing a policy was not completed, the project effect was compared with the measured value of other areas. According to the local fishing port construction project, the development latent powers, fishery latent powers, and tourism latent powers of the fishing village where the project was undertaken improved greatly, and income of the fishing village increased greatly. As a result of comparing project fit in order to evaluate the project, the project fit of the local fishing port construction project area was higher than the non-project area. Desirable method proposal of monitoring survey was established and the method for raising the efficiency of monitoring survey was extracted.

• 농촌계획
• /
• 제1권2호
• /
• pp.77-92
• /
• 1995

The initiative to determine farmland use has been transferred to local side under the decentralized government system in Korea. New Land Act and Rural Development Act support it. Changes in external and internal environments of Korean agriculture require to diversify farmland use. Lpcal development plan may be implemented when specific farmland use plan is prepared. However, (armland use planning has not been prepared by the local governments yet. This study aims to identify problems encountered in current farmland use and suggest directions of effective and reasonable farmland use planning relevant to local conditions. Questionnaire method was used to prove topographical differences of community land demand, Statistical analyses show that farmers desire to utilize marginal farmland for income increase. Growing grass(42.0%) and cash crops(41.7%) was greatly demanded by them. They were generally eager for developing touristic farm (52.1 % ). By topographical characteristics, the eager was greatest in coastal areas, on the contrary, it was relatively low in mountainous areas. There were more farmers who want to expand their farmland in rice farming(48.4%) or rice-horticulture farming(46.9%) areas. Potential retirer among farmers were most in suburban areas, However, it was expected that there would be the highest retirement rate in rice farming areas because of the high rate of aged farmers. Farmland use planning should be incorporated into food production policies and community people's needs for income increase and life improvement. Agriculture promotion areas must be maintained for scale optimized farming and cash crop farming as much as possible. However, minimum portion for other uses in each village or farming community unit should be adopted. Less favored areas will have to be utilized for both agriculture and non-agriculture uses. Priority can be put into touristic resorts as a non-agriculture use. Furthermore, such areas can be used for sustainable agriculture as well as for residence, industry, animal breeding.

• 한국전산유체공학회지
• /
• 제22권1호
• /
• pp.88-94
• /
• 2017

The IR signal entering into a sensor is composed of the following components: the self-emitted component directly from the object surface, the reflected components of the solar and sky irradiance at the object surface, and the scattered component by the atmosphere without reference to any object surfaces. The self-emitted and reflected components from the object can be lowered by the atmospheric layer between the object and the IR sensor. The principle factors influencing the atmospheric transmittance are the air temperature, the relative humidity and the observation distance. Previous studies on IR signal transmission through the atmosphere are focused on uniform atmospheric conditions and the non-uniform nature of the atmosphere was not properly treated in modeling. In this study, we use the local atmospheric transmittance to simulate the non-uniform atmosphere in analyzing the IR signal from the object surface. The results show that the nonuniform analysis of the atmosphere becomes more important as the wavelength of IR signal increases.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.1066-1080
• /
• 2024

SMART100 has a containment pressure and radioactivity suppression system (CPRSS) for passive containment cooling system (PCCS). This prevents overheating and over-pressurization of a containment through direct contact condensation in an in-containment refueling water storage tank (IRWST) and wall condensation in a CPRSS heat exchanger (CHX) in an emergency cool-down tank (ECT). The Korea Atomic Energy Research Institute (KAERI) constructed scaled-down test facilities, SISTA1 and SISTA2, for the thermal-hydraulic validation of the SMART100 CPRSS. Three separate effect tests were performed using SISTA1 to confirm the heat removal characteristics of SMART100 CPRSS. When the low mass flux steam with or without non-condensable gas is released into an IRWST, the conditions for mitigation of the chugging phenomenon were identified, and the physical variables were quantified by the 3D reconstruction method. The local behavior of the non-condensable gas was measured after condensation inside heat exchanger using a traverse system. Stratification of non-condensable gas occurred in large tank of the natural circulation loop. SISTA2 was used to simulate a small break loss-of-coolant accident (SBLCOA) transient. Since the test apparatus was a metal tank, compensations of initial heat transfer to the material and effect of heat loss during long-term operation were important for simulating cooling performance of SMART100 CPRSS. The pressure of SMART100 CPRSS was maintained below the design limit for 3 days even under sufficiently conservative conditions of an SBLOCA transient.