• 제목/요약/키워드: non-linear activation

검색결과 52건 처리시간 0.024초

바이오매스(호두껍질) 혼소에 대한 연소 특성에 관한 연구 (Combustion Characteristics for Co-firing of Biomass (Walnut Shell))

  • 김진호;이병화;락와더러지;김상인;전충환
    • 대한기계학회논문집B
    • /
    • 제39권1호
    • /
    • pp.53-59
    • /
    • 2015
  • 본 연구에서는 발전소의 혼합연료로서 바이오매스인 호두껍질(Walnut Shell)에 대한 연소특성을 조사하기 위하여 열중량 분석기(TGA)와 분류층 반응기(DTR)를 이용하여 실험을 수행하였다. 바이오매스 WS는 기존 석탄과 비교하여 낮은 온도 영역에서 활발한 연소반응을 보였고, 활성화 에너지 또한 낮은 값을 가짐으로써 연소반응속도가 더욱 증가함을 확인할 수 있었다. 바이오매스 WS와 역청탄의 혼소에 있어서 고정층 분석에서는 혼소 영향이 선형적으로 나타나는 것을 확인할 수 있었다. 그렇지만 분류층 반응기에서는 바이오매스 혼소율을 5%증가 시에는 UBC가 감소하다가 이후에 다시 UBC가 증가하는 Non-additive 현상을 확인할 수 있었다. 이는 바이오매스의 급격한 연소로 주위에 산소 부족현상이 생겨 석탄의 연소가 지연되는 것을 보여준다. 이 현상을 해결하기 위하여 산소를 증가시켜주었을 때 더 높은 혼소율을 성취할 수 있음을 보여주었다.

표면 개질된 샤프심 전극의 전기화학적 특성 고찰 및 비효소적 글루코스 센서 활용 (Electrochemical Characteristics of Pencil Graphite Electrode Through Surface Modification and its Application of Non-enzymatic Glucose Sensor)

  • 송민정
    • Korean Chemical Engineering Research
    • /
    • 제62권2호
    • /
    • pp.147-152
    • /
    • 2024
  • 의료용 센서들은 대부분 일회용 제품으로, 검사·진단 비용을 줄이기 위해서는 저가의 전극 소재 개발이 무엇보다 중요하다. 본 연구에서는 일회용 전기화학센서의 전극 소재로 pencil graphite를 도입하여 전처리 효과와 전도성 고분자 폴리아닐린(polyaniline; PANI) 및 금속 산화물 CuO NPs를 이용한 표면 개질(modification)을 통한 전기화학적 특성을 조사하고, 이를 글루코스 검출용 비효소 전기화학센서에 적용하였다. Pencil graphite electrode (PGE)의 표면 활성화를 위한 전처리는 화학적과 전기화학적으로 각각 진행되었으며, 전처리된 샘플들은 시간대전류법(CA)과 순환전압 전류법(CV), 전기화학 임피던스(EIS) 분석법을 이용한 전기화학적 특성 조사를 통해 최종적으로 전기화학적 전처리 방법을 채택하여 CuO NPs/PANI/E-PGE를 제작하였다. 이를 적용한 비효소적 글루코스 검출용 전기화학 센서는 0.282 ~2.112 mM과 3.75423~50 mM의 선형 구간에서 각각 239.18 mA/mM×cm2과 36.99 mA/mM×cm2 정도의 감도(sensitivity)와 17.6 μM의 검출 한계(detection limit), 글루코스에 대한 좋은 선택도(selectivity)를 보였다. 본 연구의 결과를 토대로 PGEs를 활용한 다양한 일회용 센서 응용과 저가의 고성능 전극 소재 개발 가능성을 확인하고, 더 많은 분야에 활용할 수 있을 것으로 기대된다.

상악 4절치의 후방견인시 나타나는 현상에 관한 유한요소법적 분석 (THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS OF THE PHENOMENON PRODUCED DURING RETRACTION OF FOUR MAXILLARY INCISORS)

  • 천옥진;김태우;서정훈
    • 대한치과교정학회지
    • /
    • 제25권5호
    • /
    • pp.525-541
    • /
    • 1995
  • 상악치열에서 제 1 소구치를 발거하고, 이 위치로 견치를 후방이동시킨 상태에서 retraction archwire를 사용하여 상악 4절치를 한 묶음으로 후방견인시켰을 때 초기에 나타나는 모든 힘 체계와 개개치아의 이동양상을 살펴보고 바람직하지 않은 치아이동을 감소시키기 위한 방안을 모색하고자 본 연구를 시행하였다. 먼저 유한요소법을 이용하여 상악 치아와 치근막의 해부학적 형태 및 생체적 특성을 컴퓨터로 재현시키고 모형화된 브라켓을 부착시킨 후, beam요소를 사용하여 5종의 retraction loop를 하나씩 부여한 다섯 가지의 탄선을 모형화하고, 브라켓과 탄선간에는 gap요소를 사용하여 모형화함으로써 전체 유한요소 모형을 완성하였다. loop의 형태, activation 의 양, gable bend와 torque의 조건에 따른 차이를 검토하기 위해, 각 조건을 변화시켜 loop를 activation시켰을 때 탄선이 발휘하는 힘과 모멘트, 치아이동의 변위를 3차원적으로 정량적 및 가시적으로 평가하고 비교, 분석한 결과 다음과 같은 결론을 얻었다. 1. tear-drop loop archwire사용시 각 치아의 근원심이동 및 설측이동이 발치공간 폐쇄에 도움이 되었으나, 바람직하지 못한 상하이동과 각 방향으로의 회전이동이 부가적으로 나타났다. 2.다섯 가지의 retraction archwire중 T-loop archwire에서 공간폐쇄에 도움이 되는 치아이동이 가장 작게 나타났으며, 각 방향으로의 회전이동 역시 가장 작게 나타났다. 3. tear-drop loop archwire에서 activation양을 증가시킴에 따라 공간폐쇄에 도움이 되는 치아이동이 점차 증가했으나, 바람직하지 못한 상하이동과 각 방향으로의 회전이동이 함께 증가했다. 4. tear-drop loop archwire에서 loop의 전후방에 gable bend부여시 전치에서 근원심방향의 치체이동에 도움이 되었으나, 모든 치아에서 상하이동과 각 방향으로의 회전이동이 함께 증가했다. 5. tear-drop loop aichwire의 절치부에 치근 설측 torque 부여시 이들 치아의 순설경사를 개선시키는 효과를 얻었으나, 그 반작용으로 견치 치관의 설측회전이 크게 증가했으며, 전치의 상하이동과 모든 치아에서 각 방향으로의 회전이동이 증가했다.

  • PDF

공내재하시험을 이용한 제주 현무암의 p-y 곡선 연구 (A Study on p-y Curves with Pressuremeter Tests in Jeju Basalt Rock)

  • 양기호;허종철;박정준
    • 한국지반신소재학회논문집
    • /
    • 제14권4호
    • /
    • pp.129-137
    • /
    • 2015
  • 최근 해상풍력발전 단지 조성은 많은 양의 에너지를 창출할 수 있어 그 기대는 점차적으로 증가하고 있다. 특히 제주도는 풍황이 우수하여 해상풍력발전 시스템 운영을 위한 최적의 대상지이기는 하나, 화산활동에 의해 형성된 지형으로 육지부와 달리 현무암층 사이에 연약층인 화산쇄설물 및 공동이 불규칙하게 발달된 층상구조로 이루어져 있다. 이에 본 연구에서는 프레셔미터 시험으로부터 제주 현무암에 근입된 수평재하말뚝의 p-y 곡선을 유도하기 위하여 프랑스석유협회(IFP, 1983)과 Briaud et al.(1983)의 방법을 이용하였다. 이들의 방법을 이용하여 유도된 p-y 곡선을 LPILE 프로그램에 입력하여 말뚝두부에서 하중-변위 관계를 분석한 후 재하시험으로 측정된 하중-변위 곡선과 비교하였다. 결과, pressuremeter test로부터 제주 현무암에 근입된 수평재하말뚝의 p-y 곡선을 유도할 때 IFP 방법은 매우 합리적인 결과를 도출할 수 있을 것으로 판단된다.

Enhanced Local Anesthetic Efficacy of Bioadhesive Ropivacaine Gels

  • Cho, Cheong-Weon;Choi, Jun-Shik;Shin, Sang-Chul
    • Biomolecules & Therapeutics
    • /
    • 제19권3호
    • /
    • pp.357-363
    • /
    • 2011
  • In relieving local pains, ropivacaine has been widely used. In case of their application such as ointments and creams, it is difficult to expect their effects for a significant period of time, because they are easily removed by wetting, movement and contacting. Therefore, the new formulations that have suitable bioadhesion were needed to enhance local anesthetic effects. The effect of drug concentration and temperature on drug release was studied from the prepared 1.5% Carboxymethyl cellulose (CMC) (150MC) gels using synthetic cellulose membrane at $37{\pm}0.5^{\circ}C$. As the drug concentration and temperature increased, the drug release increased. A linear relationship was observed between the logarithm of the permeability coefficient and the reciprocal temperature. The activation energy of drug permeation was 3.16 kcal/mol for a 1.5% loading dose. To increase the skin permeation of ropivacaine from CMC gel, enhancers such as saturated and unsaturated fatty acids, pyrrolidones, propylene glycol derivatives, glycerides, and non-ionic surfactants were incorporated into the ropivacaine-CMC gels. Among the enhancers used, polyoxyethylene 2-oleyl ether showed the highest enhancing effects. For the efficacy study, the anesthetic action of the formulated ropivacaine gel containing an enhancer and vasoconstrictor was evaluated with the tail-flick analgesimeter. According to the rat tail-flick test, 1.5% drug gels containing polyoxyethylene 2-oleyl ether and tetrahydrozoline showed the best prolonged local analgesic effects. In conclusion, the enhanced local anesthetic gels containing penetration enhancer and vasoconstrictor could be developed using the bioadhesive polymer.

Enhanced Controlled Transdermal Delivery of Hydrochlorothiazide from an Ethylene-vinyl Acetate Matrix

  • Kim, Dal-Keun;Park, Jung-Chan;Chang, Ik-Hyun;Kang, Chung;Ryu, Sang-Rok;Shin, Sang-Chul
    • Journal of Pharmaceutical Investigation
    • /
    • 제40권3호
    • /
    • pp.167-173
    • /
    • 2010
  • Repeated oral administration of hydrochlorothiazide, a loop diuretic, due to transient high blood levels, may cause adverse effects such as gastric disturbance, nausea, high blood sugar, and hyper lipidemia. Transdermal administration could avoid some of these systemic side effects and gastric disorders. We have developed a matrix using ethylene-vinyl acetate (EVA), a heat-processible and flexible material, for transdermal delivery of hydrochlorothiazide. Drug solubility was highest at 40% PEG-400 volume fraction. Drug release increased as concentration increased with a linear relationship between the release rate and the square root of loading dose. Increasing temperature increased drug release from the EVA matrix. The activation energy, measured from the slope of log P versus 1000/T, was 11.9 kcal/mol for a 2.5% loading dose from EVA matrix. Diethyl phthalate had the highest plasticizing effects on the release of hydrochlorothiazide. To increase the skin permeation of hydrochlorothiazide from the EVA matrix, enhancers such as the saturated fatty acids, the unsaturated fatty acids, and the non-ionic surfactants were added to the EVA matrix, and skin permeation was evaluated using a modified Keshary-Chien diffusion cell fitted with intact excised rat skin. Polyoxyethylene 23-lauryl ether showed the highest enhancing effects. In conclusion, transdermal delivery of hydrochlorothiazide could be improved from an EVA matrix containing plasticizer and permeation enhancer.

산성용액 내에서${\alpha}-Fe_2O_3$의 용해에 대한 환원성 염의 효과 (Effect of Reductive Salts on Dissolution of ${\alpha}-Fe_2O_3$ in Acidic Solutions)

  • 이정익;권이묵
    • 대한화학회지
    • /
    • 제27권3호
    • /
    • pp.194-200
    • /
    • 1983
  • ${\alpha}-Fe_2O_3$의 HCl 또는 $H_2SO_4$에 의한 용해반응에 있어서 금속염의 첨가효과를 분광광도법과 중량법으로 검토하였다. 환원성 금속염은 현저한 반응촉진 효과를 보이나 비환원성 금속염은 부의 효과를 나타내었다. $FeCl_2$와 같은 환원성 금속염을 첨가한 경우에 ${\alpha}-Fe_2O_3$의 용해속도가 크게 촉진되는 것은 $Fe^{3+}$$Fe^{2+}$ 사이에 chloro-brige가 형성되어 전하이동이 일어나면서 ${\alpha}-Fe_2O_3$ 표면의 격자에너지를 감소시키기 때문인 것으로 추측된다. 이 전하이동으로 인한 ${\alpha}-Fe_2O_3$ 표면의 격자 에너지 변화가 반응의 활성화에너지 변화와 대응된다고 보면 약 0.36e의 부분전하가 $Fe^{3+}$ 쪽으로 옮겨간 것으로 계산되었다.

  • PDF

Rheological Properties of the Solutions of Incompatible Polymer Blends

  • Sohn, Jeong-In;Ree, Taik-Yue
    • Bulletin of the Korean Chemical Society
    • /
    • 제2권4호
    • /
    • pp.142-147
    • /
    • 1981
  • A blend polymeric system composed of poly(methyl methacrylate) (PMMA or PM) and polystyrene (PS) dissolved in chloroform was rheologically studied. The viscosities ${\eta}_{bl}$ of the blend system with various blending ratios ${\chi}$ changing from zero (pure PS solution) to unity (pure PMMA solution) were measured at $25{\circ}C$ as a function of shear rates ${\dot{s}}$ by using a Couette type viscometer. ${\eta}_{bl}$ at a given ${\dot{s}}$ decreased exponentially with ${\chi}$ reaching asymptotic constant value of ${\eta}_{bl}$ ; ${\eta}_{bl}$ at a given ${\chi}$ is greater at a smaller ${\dot{s}}$. These results are explained by using Ree-Erying's theory of viscosity, ${\eta}_{bl}=(x_1{\beta}_1/{\alpha}_1)_{b}_1+ (x_2{\beta}_2/{\alpha}_2)_{bl}[sinh^{-1}{\beta}_2(bl) {\dot{s}}]/{\beta}_2(bl){\dot{s}}$. The Gibbs activation energy ${\Delta}G_i^\neq$(i = 2 for non-Newtonian units) entering into the intrinsic relaxation time ${\beta}$ is represented by a linear combination ${\Delta}G_i^\neq(bl) ={\chi}{\Delta}G_i^{\neq}_{iPM}+(1-{\chi}){\Delta}G_i^{\neq}_{iPS}$;the intrinsic shear modulus$[[\alpha}_i]^{-1}$ is also represented by $[{\alpha}_i(bl)]^{-1}={\chi}[{\alpha}_{iPM}]^{-1}+(1-{\chi})[{\alpha}_{iPS}]^{-1}$ and the fraction of area on a shear surface occupied by the ith flow units $x_i(bl)$ is similarly represented, i.e., $x_i(bl) = {\chi}x_{iPM}+(1-{\chi})x_{iPS}$. By using these ideas the Ree-Eyring equation was rewritten which explained the experimental results satisfactorily.

노화촉진시험법 및 TGA를 이용한 ACM 고무복합재료의 수명 예측 연구 (A Study on Life Time Prediction of ACM Rubber Composite Using Accelerated Test and Thermogravimetric Analysis)

  • 안원술;이준만;이형석
    • Elastomers and Composites
    • /
    • 제49권2호
    • /
    • pp.144-148
    • /
    • 2014
  • 자동차 엔진 부품용으로 많이 사용되는 ACM 고무 샘플에 대하여 $150^{\circ}C$, $160^{\circ}C$, $170^{\circ}C$, 및 $180^{\circ}C$의 등온상태에서 시간에 따른 압축영구줄음율(CS)과 열중량감소율을 측정하여 상관관계를 구하고, 이를 비등온 TGA를 이용하는 Toop의 해석방법에 이용하여 사용온도에서의 수명을 예측하고자 하였다. 노화촉진시험으로부터 측정된 중량감소율는 CS에 대하여 선형적으로 변화하는 것이 관찰되었으며, 이로부터 CS 40%에 이르는 시간을 재료의 수명시간으로 했을 때 중량감소에 의한 전환율은 4.2%로 나타났다. TGA 곡선으로부터 Flynn-Wall-Ozawa법에 의하여 전환율 4.2%에서의 활성화에너지는 120.2 kJ/mol로 계산되었으며, 이를 Toop의 해석법에 적용하였을 때의 예측수명은 사용온도 $120^{\circ}C$에서 약 9,700 시간으로 계산되었다.

데이터 중심 다항식 확장형 RBF 신경회로망의 설계 및 최적화 (Design of Data-centroid Radial Basis Function Neural Network with Extended Polynomial Type and Its Optimization)

  • 오성권;김영훈;박호성;김정태
    • 전기학회논문지
    • /
    • 제60권3호
    • /
    • pp.639-647
    • /
    • 2011
  • In this paper, we introduce a design methodology of data-centroid Radial Basis Function neural networks with extended polynomial function. The two underlying design mechanisms of such networks involve K-means clustering method and Particle Swarm Optimization(PSO). The proposed algorithm is based on K-means clustering method for efficient processing of data and the optimization of model was carried out using PSO. In this paper, as the connection weight of RBF neural networks, we are able to use four types of polynomials such as simplified, linear, quadratic, and modified quadratic. Using K-means clustering, the center values of Gaussian function as activation function are selected. And the PSO-based RBF neural networks results in a structurally optimized structure and comes with a higher level of flexibility than the one encountered in the conventional RBF neural networks. The PSO-based design procedure being applied at each node of RBF neural networks leads to the selection of preferred parameters with specific local characteristics (such as the number of input variables, a specific set of input variables, and the distribution constant value in activation function) available within the RBF neural networks. To evaluate the performance of the proposed data-centroid RBF neural network with extended polynomial function, the model is experimented with using the nonlinear process data(2-Dimensional synthetic data and Mackey-Glass time series process data) and the Machine Learning dataset(NOx emission process data in gas turbine plant, Automobile Miles per Gallon(MPG) data, and Boston housing data). For the characteristic analysis of the given entire dataset with non-linearity as well as the efficient construction and evaluation of the dynamic network model, the partition of the given entire dataset distinguishes between two cases of Division I(training dataset and testing dataset) and Division II(training dataset, validation dataset, and testing dataset). A comparative analysis shows that the proposed RBF neural networks produces model with higher accuracy as well as more superb predictive capability than other intelligent models presented previously.