• Journal of Advanced Navigation Technology
• /
• v.13 no.5
• /
• pp.677-683
• /
• 2009

In this study, we designed and implemented testbed for localization algorithm by using a area reduction method in outdoor environment. The proposed algorithm used 3 steps of area reduction method, which estimated blind nodes position. Also, we have experimented with using a Zigbee module for 5 fixed reference nodes and 4 blind nodes in sensor field of $60m{\times}23m$. The results show that our algorithm is improved the localization accuracy even at the number of ref. node is fixed and the number of blind node is increased. In future research, we will be adding the function of seamless localization in indoor and NLOS(non-line of sight) environment.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.39.1-39.1
• /
• 2013

We use high-resolution hydrodynamic simulations to study nonlinear gas responses to imposed non-axisymmetric stellar potentials in barred-spiral galaxies. The gas is assumed to be infinitesimally thin, isothermal, and unmagnetized. We consider various spiral-arm models with differing strength and pattern speed, while fixing the bar parameters. We find that the extent and shapes of spiral shocks as well as the related mass drift depend rather sensitively on the pattern speed. In models where the arm pattern is rotating more slowly than the bar, the gaseous arms extend from the bar ends all the way to the outer boundary, with a pitch angle slightly smaller than that of the stellar counterpart. The arms drive mass inflows at a rate of ${\sim}0.5-2.5M{\odot}/yr$ to the bar region to which the shock dissipation, external torque, and self-gravitational torque contribute about 50%, 40%, and 10%, respectively. About 85% of the inflowing mass is added to bar substructures such as an inner ring, dust lanes, and a nuclear ring. while the remaining 15% encircles the bar region. On the other hand, models where the arms corotate with the bar exhibit mass outflows, rather than inflows, over most of the arm region. In these models, spiral shocks are much more tightly wound than the stellar arms and cease to exist in the region where $M{\bot}/sinp*{\geq}25-40$, where $M{\bot}$ denotes the Mach number of a rotating gas perpendicular to the arms with pitch angle p*. We demonstrate that the distributions of line-of-sight velocities and densities can be a useful diagnostic tool to distinguish if the arms and bar corotate or not.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5A
• /
• pp.509-516
• /
• 2006

Satellite-Digital Multimedia Broadcasting(S-DMB) systems are single frequency networks which consist of a satellite and gap fillers. Though gap fillers are required to extend the coverage to NLOS(Non Line-of-Sight) area, the receiver performance can be degraded with a limited number of fingers due to the increased number of multi-paths. The paper proposes to use frequency domain equalizer(FDE) instead of conventional Rake receiver, where the guard interval is not considered in order to minimize the impact on the current S-DMB systems. Through a campaign of simulations, it is found that the proposed FDE is less sensitive to the number of gap fillers compared to the conventional Rake receiver, and can achieve a greater channel capacity in most channel environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2B
• /
• pp.287-295
• /
• 2010

RTLS used to track the location of object or person in real time. However, if there are a lot of tags and readers, the conventional single RTLS server may fail to estimate location of tags. And if the server cannot receive the tags signal due to pass-loss or NLOS from more than three readers, the server fail to estimate location of tags. In this paper, we propose a special reader which embeds RTLS location engine for distributed RTLS. And by using multi-directional antenna, alleviating multi-path effect and allowing estimate tag's location only using two readers. We also implement the system, we can reduce server packet 16times and get the all results of location estimate in single second. We achieved the location error within 1m.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.297-306
• /
• 2012

In this paper, we propose a Time Delay Traceback Scheme for the TDOA location estimation performance enhancement in NLOS environment and analyze the performance in various conditions. We place multiple readers in a square($300m{\times}300m$) searching area for reuse of received signal. Also, we use more active NLOS reader detection methode for NLOS error mitigation. when NLOS time delay 70 m, the number of the NLOS reader is 3 and the received sub-blinks number 3, proposed time delay trace-back scheme improve the RMSE about 16 m. From these results, we confirm that the proposed time delay traceback scheme is well-suited for the high precision location estimation to offer the location based service.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.211-218
• /
• 2000

This paper describes the improvement of broadband radio channel characteristics using a MMSE adaptive equalization technique as a fundamental study of high transmission rates in indoor radio channel. First, the performance of 16-QAM system that employs a MMSE linear adaptive equalizer in Rayleigh fading channel is analyzed. Next, in order to improve broadband radio channel characteristics, we apply an adaptive equalization technique employing the MMSE algorithm to the radio channel measured by using circularly polarized antenna under indoor NLOS(non-line-of sight) environment. Consequently, for 16-QAM with adaptive equalizer, we can achieve the improvement of about 13 dB at $10^{-3}$ error rate as compared with general 16-QAM. Moreover, it was found that the adaptive equalization technique could improve broadband radio channel characteristics over the all measured areas. Also, it was found that the employing both adaptive equalization and polarization diversity technique together could improve broadband radio channel characteristics and reduce fading more effectively.

• Journal of Internet Computing and Services
• /
• v.15 no.2
• /
• pp.9-18
• /
• 2014

The sensors attached on/in a person are moved since human body frequency changes their activity, therefore in wireless body area networks, nodal mobility and non-line-of-sight condition will impact on performance of networks such as energy efficiency and reliable communication. We then proposed schemes which study on forwarding decisions against frequent change of topology and channel conditions to increase reliable connections and improve energy efficiency. In this work, we control the size of packets, forwarding rate based on ratio of input links and output links at each node. We also robust the network topology by extending the peer to peer IEEE 802.15.4-based. The adaptive topology from chain-based to grid-based can optimal our schemes. The simulation shows that these approaches are not only extending network lifetime to 48.2 percent but also increase around 6.08 percent the packet delivery ratio. The "hot spots" problem is also resolved with this approach.

• Journal of Convergence for Information Technology
• /
• v.7 no.3
• /
• pp.97-103
• /
• 2017

In this paper, we aim to investigate the generalization of ZRC codes by performing performance analysis on various coding rates and channel conditions of Zero Reduction Code (ZRC) for dimming control in VLC system. Simulation results show that the ZRC codes with relatively high coding rate achieve the enhanced BER performance as the RMS (Root Mean Square) delay spread value increases in the NLOS channelse. Therefore, it is expected that the designing of the dimming control technology using ZRC in the future visible light communication system will help to determine the coding rate according to the channel state through the analysis result in this study.

• Journal of Advanced Navigation Technology
• /
• v.11 no.2
• /
• pp.154-162
• /
• 2007

This paper verifies the performance of the wireless-signal map-matching (WSMM) method that is recently proposed to mitigate the effects of non-line-of-sight (NLOS) error in positioning under wireless terrestrial network environments. The WSMM method is the new positioning technology that estimates and compensate the NLOS errors by processing the bulks of anonymous measurements at unknown locations that are collected randomly and automatically. The WSMM method would be advantageous for various configurations of future ubiquitous sensor networks since it is based on the existing network configuration for communication and it requires no additional hardware in base stations and mobile handsets. It is shown that the application of the WSMM concept to the real CDMA pilot strength measurment message (PSMM) actually mitigates the NLOS error effects and improves overall positioning accuracy.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.3
• /
• pp.219-229
• /
• 1996

Path loss prediction method, one of the most essential parts in measuring the service area in mobile telecommunication, has been developed for many years. But, wave propagation depends on many kinds of environmental factors such as frequency, distance, the heights of transmitting and receiving antenna and the terrain status(buildings in large city, hilly terrain, mountain). These are the main reasons that the propagation models developed in foreign environments can not fit into Korean propagation condition. In this paper, therefore, we performed the measurement in Korean terrain environment in pager frequency band after deviding the terrain characteristics into six types. With this measured data, we derived several curves that follows the long-term wave progagation behavior and developed the wave propagftion prediction model which calculates the field strength at any point in the service area. The proposed model estimates the field strength in two categories, LOS(line-of-sight), or non LOS. We applied this model using the digital terrain data base and compared with the measured data. The result shows that the errors were between 3~9dB, which turned out to be practical.