• Journal of Periodontal and Implant Science
• /
• 제37권4호
• /
• pp.849-857
• /
• 2007

Purpose: The purposes of this study were to compare and quantify the expressions of RANK and RANKL in the gingival tissues of non-periodontitis patient and patients with chronic periodontitis, in order to understand the contribution of these proteins to periodontal destruction. Material and methods: Gingival tissue samples were obtained during periodontal surgery or tooth extraction. According to the patient's systemic condition & clinical criteria of gingiva, each gingival sample was divided into two groups. Group 1 (n=8) is clinically healthy gingiva without bleeding and no evidence of bone resorption or periodontal pockets, obtained from non-periodontitis patients. Group 2 (n=8) is inflammed gingiva from patients with chronic periodontitis. Tissue samples were prepared and analyzed by Western blotting. The quantification of RANK and RANKL were performed using a densitometer and statistically analyzed by Student's t-Test. Results: The expression of RANK were similar in group 1 and 2. The difference between group 1 and 2 was not statistically significant. And the mean amount of RANKL was more increased in group 2 than group 1. The difference between group 1 and group 2 was statistically significant. Conclusion: The expression level RANK didn't show any significant difference between healthy tissue from non-periodontitis patients and inflamed tissue from chronic periodontitis, but the expression level of RANKL in inflammed tissue from chronic periodontitis showed significantly increased tendency compared to healthy gingiva from non-periodontitis patients. Therefore, characteristics of RANK and RANKL in progress of chronic periodontitis would be basis of further studies in diagnostic method and treatment index of the disease.

• 공업화학
• /
• 제16권6호
• /
• pp.857-864
• /
• 2005

탈알루미늄 및 알칼리/알칼리토금속 양이온으로 치환한 Y형 및 ZSM-5 제올라이트 촉매를 제조하였다. 전처리 후 Y형 및 ZSM-5 제올라이트의 Si/Al비는 증가하였고, bulk보다는 표면에서의 Si/Al비가 더 큰 것을 알 수 있었다. 전처리에 의해 제조된 Y형 및 ZSM-5 제올라이트의 골격구조 파괴는 주로 탈알루미늄 처리과정에서 Al 이온의 탈리에 의한 것이며, framework이 감소하고 non-framework이 증가하였다. 이러한 현상은 스팀처리 시간이 많아질수록 증가하였고, 양이온으로 치환함에 따라 더욱 심화되었음을 알 수 있었다. NO-TPD 실험결과, 전처리된 Y형 및 ZSM-5 제올라이트는 탈착봉우리가 저온으로 이동하였다. 또한 스팀처리 시간이 많은 촉매물질일수록 탈착온도가 더 낮은 온도로 이동하였다. 촉매의 활성은 치환된 양이온, Si/Al 함량비 및 탈알루미늄으로 변화된 골격구조에서 framework과 non-framework의 비율에 의존하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1555-1560
• /
• 2004

We made a simplified eddy-current-tester, and observed some materials for the ingredients and mass and locations. The tester detects the current as frequency shifts of a LC-resonance circuit, which are caused by the eddy currents. Using air-wick coil and a multi-piled ceramic capacitor, we made a resonance system whose frequency was 100KHz. The shift quantity is few; so, to detect it, we used a frequency counter, and counted the shift. We can detect 10Hz order's shift.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.929-934
• /
• 2001

As the notion of environment protection changes throughout the world, construction engineers, as part of the effort to resolve environmental problems, have been actively doing research on environmental friendly porous concrete using large and non-uniform aggregate. Concrete having a great deal of continuous porosity enable water and air to pass freely through firmly hardened material, allowing necessary nutrients to reach roots of vegetation, thereby sustaining them. It is possible to prevent the exhaustion of natural resources by recycling waste concrete and industrial by-products, to reduce damage caused by the destruction of nature through effective management of natural resources, to preserve the natural environment and vegetation in urban areas by activating the soil, protecting the underground ecology system, and growing garden plants through the application of environmentally friendly concrete.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.492-497
• /
• 1998

Thermoacoustic oscillation is a significant problem in cylindrical-type combustors such as common internal combustion engines, industrial furnaces, gas turbine, etc. This kind of low frequency oscillation can give rise to serious troubles such as the destruction of system or producing of a strong noise. Accurate numerical simulation of thermoacoustic phenomena is a complex and challenging problem. Especially, considering the reaction of mixture intensifies the difficulty of analysis. Like as other simulations of the aerodynamics and aeroacoustics, direct computation of thermoacoustic phenomena requires that the Navier-Stokes equations be solved using accurate numerical differentiation and time-marching schemes, with non-reflecting boundary conditions. In this study,, numerical approach aims at qualitative analysis and efficient prediction of problem, not at the development of an accurate scheme. Overally speaking, numerical prediction is reasonably matched with experimental result.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.373-378
• /
• 2000

The objective of this study was to investigate the influence the influence of theoretical void ratio(T.V.R), grading of aggregate and curing method on the strength and water permeability of porous concrete, and the reduction proportion of water permeability by these factors. The results of the study showed that its strength and water permeability were greatly depended on the T.V.R and grading of aggregate, but didn't on the curing method. And, when the T.V.R and grading of aggregate were increased, the reduction proportion of water permeability was small. As the relation ship between its physical properties and non-destruction test values was very high, its use for the estimation of the physical properties will be useful.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 학술대회 논문집 전문대학교육위원
• /
• pp.157-161
• /
• 2000

The electronic ballasts for low pressure discharge lamps are produced and commercialized. However, the electronic ballasts for high pressure lamps are now in progress because of poor reliability and high cost. The major case of troubles with electronic ballasts are thermal destruction of semiconductor output switches due to non ideal i-v characteristics of switch. The loss converts to heat and rises the temperature of switch and it increases proportionally to switching frequency and value of current and voltage. This study shows the variable frequency ballasts which can suppress the heating of switches efficiently. It is used for the limitation the switch current and the rising temperature of switch by impedance variation of lamp inductor. As a result, initial warm-up time of the proposed ballasts was faster than that of magnetic ballasts about 90 msec. Power factor of tested ballasts follow as ; input and output average of magnetic ballasts are 93 [%] and 86 [%], respectively, And proposed ballasts are 97 [%] and 99 [%], respectively.

• Structural Engineering and Mechanics
• /
• 제9권1호
• /
• pp.51-68
• /
• 2000

The paper presents theoretical and experimental investigations on three varying thickness circular cylinders, which were tested to destruction under external hydrostatic pressure. The five buckling theories that were presented were based on inelastic shell instability. Three of these inelastic buckling theories adopted the finite element method and the other two theories were based on a modified version of the much simpler von Mises theory. Comparison between experiment and theory showed that one of the inelastic buckling theories that was based on the von Mises buckling pressure gave very good results while the two finite element solutions, obtained by dividing the theoretical elastic instability pressures by experimentally determined plastic knockdown factors gave poor results. The third finite element solution which was based on material and geometrical non-linearity gave excellent results. Electrical resistance strain gauges were used to monitor the collapse mechanisms and these revealed that collapse occurred in the regions of the highest values of hoop stress, where considerable deformation took place.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권8호
• /
• pp.3555-3560
• /
• 2012

The tumour lysis syndrome (TLS) is a group of metabolic abnormalities caused by rapid and unexpected release of cellular components into the circulation as a result of massive destruction of rapidly proliferating malignant cells. It usually develops in patients with hematologic malignancies like acute lymphoid leukemia, non-Hodgkin and Burkitt's lymphoma after initiation of chemotherapy or may, rarely, occur spontaneously. Though TLS is seldom observed in relation to solid tumours, there have been reports of connections with examples such as lung, liver, breast, gastric carcinomas. The clinical manifestations of TLS include hyperuricemia, hyperkalemia, hyperphosphatemia and hypocalcemia. These indications if untreated lead to life-threatening complications such as acute renal failure, cardiac arrhythmias, seizures, and eventually death due to multiorgan failure. Therefore early detection of TLS is of vital importance. This can be accomplished by identification of high risk patients, implementation of suitable prophylactic measures andmonitoring of the electrolyte levels in patients undergoing chemotherapy.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.464-469
• /
• 2003

The traditional and still most widely used, test methods for concrete structures are destructive method, such as coring, drilling or otherwise removing part of the structure to permit visual inspection of the interior. While these methods are highly reliable, they are also time consuming and expensive, and the defects they leave behind often become focal point for deterioration. In this study, tomography by theoretical inversion method in case of elastic wave using impact-echo method among concrete non-destruction test method was made. Taken model experiments are theoretical inversion method and time domain and frequency domain test on pier test model at laboratory level. Also experiment concerning frequency domain on 3 kinds of tunnel model with I-dimension form was carried out.