• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.2 s.39
• /
• pp.21-26
• /
• 2006

We developed a bonding at low temperature using fine pitch Sn and In bumps, and studied the reliability of the fine pitch In-Sn solder joints. The $30{\mu}m$ pitch Sn and In bumps were joined together at $120^{\circ}C$. A non conductive adhesive (NCA) was applied during solder joining. Thermal cycling test ($0^{\circ}C-100^{\circ}C$, 2 cycles/h) of up to 2000 cycles was carried out to evaluate the reliability of the solder joints. The bondability was evaluated by measuring the contact resistance (Rc) of the joints through the four point probe method. As the content of filler increased, the reliability improved in the solder joints during thermal cycling test because the contact resistance increased little. The filler redistributed the stress and strains from the thermal shock over the entire joint area.

• Journal of Forest and Environmental Science
• /
• v.33 no.4
• /
• pp.342-347
• /
• 2017

Since the first report of the oak wilt disease at 2004 in Korea, the disease distributed over Korean peninsula and are still giving severe damages. The management of oak wilt disease in Korea has mainly focused on the control of insect vector, Platypus koryoensis. Neverthless the effective method for evaluating the pathogenicity of the pathogen, Raffaelea quercus-mongolicae (Rqm), and for screening chemical or biological agents with strong inhibitory activity against the pathogen, is absolutely necessary, an reliable method is not available so far. This study was conducted to develop the effective method for evaluating the pathogenicity of Rqm in oak trees. The culture suspensions of Rqm were artificially injected to the saplings of Quercus acutissima by using ChemJet tree injector. Three months after treatments, the treated saplings were cut and dipped into 1% fuchsin acid solution. There were significant differences in non-conductive area (%), discoloration area (%) and vertical discoloration length between the pathogen-injected and distilled water-injected control treatments. These results indicated that the pathogen is the causal agent for the dysfunction of water conductive tissue, which will finally result in wilt symptom. Re-isolation of the pathogen and PCR detection using specific primers for the pathogen also confirmed the presence of Rqm in the sapwood chips of the pathogen-injected saplings. These observations would be greatly applied to other related researches for evaluating the pathogenicity of tree wilt pathogens and biocontrol efficacy of the selected antagonistic microorganisms, in case that the wilt symptom is not easily shown by artificial inoculation of the causal agent.

• Journal of Forest and Environmental Science
• /
• v.34 no.5
• /
• pp.376-381
• /
• 2018

For the control of oak wilt caused by Raffaelea quercus-mongolicae, an antifungal microorganism, Streptomyces blastmyceticus, was used as a potential agent. Culture suspension of S. blastmyceticus was injected into Quercus mongolicae in the research forest of Kangwon National University by $ChemJet^{(R)}$ trunk injection and Macro-infusion at root flare injection. $Alamo^{(R)}$ (a.i., propiconazole 14.5%), a fungicide currently used for the control of oak wilt in USA, was also treated by both methods to compare the efficacy. For preventive efficacy, culture suspension of the pathogen was inoculated at 1 month after injection of either agent. Tested trees were cut at 3 months after treatment, stained with 1% Fuchsin acid, and then non-conductive area (NCA) and re-isolation frequency (RIF) of oak wilt fungus were compared among treatments. While NCA was the highest as 47.3% in pathogen only treatment, it was the lowest as 16.0% in sterilized water treatment by Macro-infusion. NCAs of Alamo treatment by Macro-infusion and ChemJet injection were 25.3% and 32.1%, respectively. NCA of S.blastmyceticus treatment by ChemJet injection was 32.3%, similar with Alamo treatment's by ChemJet injection. All treatments by either injection method showed significantly lower NCA compared to the pathogen only treatment. These results indicate that S. blastmyceticus injection shows the preventive efficacy against oak wilt disease by suppressing the growth of pathogen injected. NCA of Macro-infusion injection of sterilized water was lower as 16.0%, compared to 21.3% of ChemJet injection. It means that Macro-infusion is more effective in translocation of sterilized water than ChemJet injection by even distribution. RIF from wood discs of treated trees showed high in pathogen only treatment, but relatively low in S. blastmyceticus treatment. RIF results were correlated with NCA results. From the above results, it was confirmed that S. blastmyceticus showed preventive efficacy against oak wilt disease by ChemJet trunk or Macro-infusion at root flare injection.