• Journal of Korea Society of Digital Industry and Information Management
• /
• v.17 no.3
• /
• pp.121-132
• /
• 2021

The purpose of this study is to explore ways to improve the quality of real-time video lectures in a non-face-to-face environment using IPA (Importance-Performance Analysis). Recently, due to the impact of COVID-19 in universities, all remote classes are being implemented, so research is needed to raise learner awareness. Accordingly, factor analysis, mean analysis, correspondence analysis, and IPA analysis were performed based on the data of 632 students who responded from March 21 to June 30, 2021 for learners of K University in Chungbuk. First, overall satisfaction was low compared to importance, and the difference in system perception was the largest. Second, the difference in learner perception of real-time video lectures through the IPA matrix showed that the system error and screen cutoff were the largest. Third, the difficulty of lecture content, task and test feedback, etc. are classified. Accordingly, the satisfaction of real-time video lectures in non-face-to-face environments is low, suggesting that school-level support for quality improvement to improve learner satisfaction in non-face-to-face environments and the role of instructors are needed to improve learners' academic achievement.

• Journal of Aerospace System Engineering
• /
• v.9 no.1
• /
• pp.12-18
• /
• 2015

The inter-conversion between different control laws in flight has a lot of risk. The SWM(Switching Mechanism) including logic and stand-by mode is designed to analyze the transient response of aircraft during inter-conversion between different control laws, based on the in-house software for non-real-time and real-time simulation. The SWM applies the fader logic of TFS(Transient Free Switch) to minimize the transient response of an aircraft during the inter-conversion, and applies the reset '0' type of the stand-by mode to prevent surface saturation due to integrator effect in the disengaged flight control law. The transition time is also important to minimize the objectionable transient response in the inter-conversion, as well as the transition control law design. This paper addresses the results of non-real-time simulation for the characteristics of transient response to different transition time to select the adequate transient time, and the real-time pilot evaluation, using SSWM(Software Switching Mechanism) and HSWM(Hardware Switching Mechanism), which is met for Level 1 flying qualities and assures safety of flight.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.4
• /
• pp.59-71
• /
• 2001

The Current CORBA shows some limitations for its successful deployment in real time system applications. Recently, OMG adopted Real-Time CORBA specification, which is defined as an extension to CORBA. The goal of the Real-Time CORBA is to provide a standard for CORBA ORB implementations that support 'end to end predictability'. In order to support 'end-to-end predictability', Real Time CORBA specifies many components such as priority model, communication protocol configuration, thread management, and etc. Among them, 'priority model' is the most important mechanism for avoiding or bounding priority inversion in CORBA invocations. In this paper, we present our efforts on a design ,and implementation of the Priority Model in Real-Time CORBA specification. The implementation is done as an extension of omniORB2(v.3.0.0), a popular open source non real time ORB. Experiment results demonstrate that our priority model implementation shows better performance and predictability than the non real-time ORB.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.5
• /
• pp.423-431
• /
• 2000

In this paper, the effect of computing time-delay in the real-time digital fuzzy control systems is investigated and the design methodology of a real-time digital fuzzy controller(DFC) to overcome the problems caused by it is presented. We propose the fuzzy feedback controller whose output is delayed with unit sampling period. The analysis and the design problem considering computing time-delay is very easy because the proposed controller is syncronized with the sampling time. The stabilization problem of the digital fuzzy control system is solved by the linear matrix inequality(LMI) theory. Convex optimization techniques are utilized to find the stable feedback gains and a common positive definite matrix P for the designed fuzzy control system Furthermore, we develop a real-time fuzzy control system for backing up a computer-simulated truck-trailer with the consideration of the computing time-delay. By using the proposed method, we design a DFC which guarantees the stability of the real time digital fuzzy control system in the presence of computing time-delay.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.11
• /
• pp.1117-1123
• /
• 2008

This paper implements dual-kernel system using standard Linux and real-time embedded Linux for the real-time control of intelligent robot systems. Such system provides more useful services including standard Linux thread that is easy to implement complicated tasks and real-time tasks for the deterministic response to velocity control. Here, an open source real-time embedded Linux, XENOMAI, is ported on embedded target board. And for interfacing with motor controller we adopted a real-time serial device driver. The real-time task was implemented with a priority to keep the cyclic control command for trajectory control. In order to validate deterministic response of the proposed system, the performance measurement of the delay in performing trajectory control with feedback loop is evaluated with non real-time standard Linux. The proposed software architecture is anticipated to take advantage of features in both standard Linux and real-time operating systems for the intelligent robot systems.

• International journal of advanced smart convergence
• /
• v.8 no.1
• /
• pp.9-17
• /
• 2019

In this article, we present a performance enhancement scheme for mobile applications by adopting persistent memory. The proposed scheme supports the deadline guarantee of real-time applications like a video player, and also provides reasonable performances for non-real-time applications. To do so, we analyze the program execution path of mobile software platforms and find two sources of unpredictable time delays that make the deadline-guarantee of real-time applications difficult. The first is the irregular activation of garbage collection in flash storage and the second is the blocking and time-slice based scheduling used in mobile platforms. We resolve these two issues by adopting high performance persistent memory as the storage of real-time applications. By maintaining real-time applications and their data in persistent memory, I/O latency can become predictable because persistent memory does not need garbage collection. Also, we present a new scheduler that exclusively allocates a processor core to a real-time application. Although processor cycles can be wasted while a real-time application performs I/O, we depict that the processor utilization is not degraded significantly due to the acceleration of I/O by adopting persistent memory. Simulation experiments show that the proposed scheme improves the deadline misses of real-time applications by 90% in comparison with the legacy I/O scheme used in mobile systems.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.260-267
• /
• 2013

A combat system for navy's battleship is a system of systems who supports naval indigenous operations by integrating and inter-operating many different kind of weapon and non-weapon systems, which has characteristics of large-scale complex computing system. This paper considers a characteristics of naval combat system which has been developed by domestic technology and suggests a way to improve future naval combat system in terms of computing architecture by applying commercial real-time operating system technologies. This paper also provides an evaluation criteria for combat system adaptability of real-time operating systems.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.2
• /
• pp.194-200
• /
• 2006

The SoC and digital technology development recently enabled the emergence of information devices and control devices because the SoC presents many advantages such like lower power consumption, greater reliability, and lower cost. However, it is nearly impossible to use the SoC without operating systems because the SoC is included with many peripherals and complex architecture. It is required to use embedded operating systems and real-time operating systems may be used as an embedded operating system. So far, real-time operating systems are widely used to implement a Real-Time system since it meets developer's requirements. However, real-time operating systems have disadvantages including a lack of standards, expensive development, and license. Embedded Linux is able to overcome their disadvantages. In this paper, the implementation of control system platform for a mobile robot using real-time Embedded Linux is described. As a control hardware system platform, XScale board is used. As the real-time Embedded Linux, RTAI is adopted which is open source and royalty free, and supports various architectures and real-time devices, such like real-time CAN and real-time COM. This paper shows the implementation of RTAI on XScale board that means the porting procedure. We also applied the control system platform to the mobile robot and compared the Real-Time serial driver with non real-time serial driver. Experimental results show that that using RTAI is useful to build real-time control system with powerful functionalities of Linux.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1843-1846
• /
• 2002

The object-oriented(OO) distributed real- time(RT) programming movement started in 1990’s and is growing rapidly at this turn of the century Distributed real-time simulation is a field in its infancy but it is bounded to receive steadily growing recognition for its importance and wide applicability. The scheme is called the distributed time-triggered simulation scheme which is conceptually simple and easy to use but widely applicable. A new generation object oriented(00) RT programming scheme is called the time-triggered message triggered object(TMO) programming scheme and it is used to make specific illustrations of the issues. The TMO structuring scheme is a general-style components structuring scheme and supports design of all types of component including hard real time 1 objects and non real time objects within one general structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10A
• /
• pp.990-999
• /
• 2002

The object-oriented(OO) distributed real-time(RT) programming movement started in 1990's and is growing rapidly at this turn of the century. Distributed real-time simulation is a field in its infancy but it is bounded to receive steadily growing recognition for its importance and wide applicability. The scheme is called the distributed time-triggered simulation scheme which is conceptually simple and easy to use but widely applicable. A new generation object oriented(OO) RT programming scheme is called the time-triggered message triggered object(TMO) programming scheme and it is used to make specific illustrations of the issues. The TMO structuring scheme is a general-style components structuring scheme and supports design of all types of component including hard real time objects and non real time objects within one general structure.