• Journal of Chest Surgery
• /
• v.33 no.1
• /
• pp.7-19
• /
• 2000

Background :To assess the accuracy of Electron-Beam Tomography(EBT) in following evaluation of the pulmonary vascular system after a shunt operation in the cyanotic con-genital heart disease with pulmonary stenosis or pulmonary atresia. Material and Method : Sixteen patients(M:F=11:5) who received Blalock-Taussig(n=8) bidirectional cavo-pulmonary shunt(n=10) and unifocalization (n=2) were ncluded in the study. We evaluated the patency of the shunt the morphology of intrapericardial and hilar pulmonary arteries(PA) peripheral pulmonary vascularity by background lung attenuation and the abundance of arterial & venous collateral. Angiography(n=12) and echocardiography(n=20) were used as the gold standard for the comparison of EBT results. Result: EBT was consistent with angiogram/ echo in 100% of the evaluation for the patency of the shunt and in 12(by angiogram 100%) and 19(by echo 95%) for the detection the hypoplasia stenosis or interruption of central PA In measuring of PA EBT and angiogram corrlated(r=0.91) better than EBT-echo(r=0.88) or echo-angiogram(r=0.72) Abundant systemic arterial collateral were noted in 4 and venous collateral in 3 cases. In evaluating the peripheral pulmonary vascularity the homogenous and normal-ranged lung attenuation(m=6) decreased but homo-genous attenuation(n=1) segment-by-sgment heterogeneous attenuation(n=3) homogenous but asymmetrical attenuation(n=3) segment-by-segment heterogeneous attenuation(n=3) homogenous but asymmetrical attenuation(n=3) and venous congestion(n=2) were observed nd 12 of them were compatible with the blood flow pattern revealed by cardiac catheterization. Conclusion: EBT was accurate in the integrated evaluation of the pulmonary vascular system after the shunt including the patency of the shunt operaion the morphology and dimension of the central and hilar PAs and the loco-regional pulmonary flow in the lung parenchyma. It suggests the useful information about the need of secondary shunt operation the proper timing time for total repair and the need of interventional procedure prior to total repair.

• Journal of applied mathematics & informatics
• /
• v.9 no.2
• /
• pp.761-769
• /
• 2002

Due to the large scale application of software systems, software reliability plays an important role in software developments. In this paper, a software reliability growth model (SRGM) is proposed. The testing time on the right is truncated in this model. The instantaneous failure rate, mean-value function, error detection rate, reliability of the software, estimation of parameters and the simple applications of this model are discussed .

• Kyungpook Mathematical Journal
• /
• v.18 no.2
• /
• pp.311-319
• /
• 1978

This paper deals with the evaluation of two definite integrals involving spheroidal wave function, H-function of two variables, and the generalized hypergeometric function. Also, an expansion formula for the product of generalized hypergeometric function and the H-function of two variables has been obtained. Since the H-function of two variables, spheroidal wave functions, and the generalized hypergeometric function may be transformed into a number of higher transcendental functions and polynomials, the results obtained in this paper include some known results as their particular cases. As an application of such results, a problem of heat conduction in a non-homogenous bar has been solved by using the generalized Legendre transform [9].

• Physical Therapy Rehabilitation Science
• /
• v.8 no.4
• /
• pp.175-186
• /
• 2019

Objective: Non-specific chronic low back pain (NS-CLBP) has been related to abnormal trunk muscle activations, but literature reported considerable variability in muscle amplitudes of NS-CLBP patients during prolonged sitting periods. Therefore, the purpose of this study was to examine the differences among homogenous NS-CLBP subgroups in muscle activity, using muscle co-contraction indices as a more objective approach, and their roles on pain development during a 1-hour period of prolonged sitting. Design: Cross-sectional study. Methods: Twenty NS-CLBP subjects with motor control impairment (MCI) [10 classified as having flexion pattern disorder, and 10 with active extension pattern disorder], and 10 healthy controls participated in the study. Subjects followed a 1-hour sitting protocol on a standard office chair. Four trunk muscle activities including amplitudes and co-contraction indices were recorded using electromyography over the 1-hour period. Perceived back pain intensity was recorded using a numeric pain rating scale every 10 minutes throughout the sitting period. Results: All study groups presented with no significantly distinctive trunk muscle activities at the beginning of sitting, nor did they change over time when pain increased to a significant level. Both MCI subgroups reported a similarly significant increase in pain behavior through mid-sitting (p<0.001). However, after mid-sitting, they significantly differed from each other in pain (p<0.01) but did not differ in the levels of muscle activation. Conclusions: This study was the first to highlight the similarities in trunk muscle activities among homogenous NS-CLBP patients related to MCI and compared them to healthy controls while sitting for an extended period of time, and the significant increase in pain over the 1-hour sitting might not be attributed to trunk muscle activation.

• Tribology and Lubricants
• /
• v.27 no.4
• /
• pp.183-192
• /
• 2011

In this study, using the governing equations for thermohydrodyamic lubrication involving the homogeneous mixture of incompressible fluid derived by based on the principle of continuum mechanics, it is discussed the effects of water dispersed within engine oil on the performance of high speed journal bearing of a turbocharger. The governing equations are the general equations being able to be applied on the mixture of Newtonian fluid and non-Newtonian fluid. Here, the fluid viscosity index, n of power-law non-Newtonian fluid is supposed to be 1 for the application of the journal bearing on a turbocharger lubricated with the mixture of two Newtonian fluids, water dispersed within engine oil. The results related with the bearing performance are showed that the friction force and bearing load capacity decrease as increasing the volume percent of water.

• Journal of Korean Society for Quality Management
• /
• v.37 no.3
• /
• pp.33-38
• /
• 2009

When we estimate the parameters of software reliability models, we usually use maximum liklihood estimator(MLE). But this method is required a large data set. In particular, when we want to estimate it with small observed data such as early stages of testing, we give rise to the non-existence of MLE. Therefore, it is interesting to look into the influence of parameter estimators obtained using MLE. In this paper, we use two non-homogenous poisson process software reliability growth model: delayed S-shaped model and log power model. In this paper, we calculate the sensitivity of estimators about failure intensity function for two SRGMs respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.96.2-96.2
• /
• 2011

Water transport through the microporous membrane was modeled considering capillary condensation as well as capillary flow in porous media as a function of pore diameter and relative humidity at the surface. The present model was adopted by the numerical simulation of non-isothermal, non-homogenous flow in a shell and tube typed gas to gas membrane humidifier for PEMFC (proton exchange membrane fuel cell) and the result shows good agreement with experimental data.

• Tribology and Lubricants
• /
• v.27 no.2
• /
• pp.77-87
• /
• 2011

In this study, using the governing equation for thermohydrodyamic lubrication involving the homogeneous mixture of incompressible fluid derived by based on the principle of continuum mechanics, it is discussed the effects of water within turbine oil on the performance of high speed journal bearing of a steam turbine shipping engine. The governing equation is the general equation being able to be applied on the mixture of Newtonian fluid and non-Newtonian fluid. Here, the fluid viscosity index, n of power-law non-Newtonian fluid is supposed to be 1 for the application of the journal bearing in a steam turbine shipping engine lubricated with the mixture of two Newtonian fluid, for example, water within turbine oil. The results related with the bearing performance are showed.

• Structural Engineering and Mechanics
• /
• v.53 no.5
• /
• pp.981-995
• /
• 2015

This paper presents a finite element procedure for dynamic analysis of non-uniform Timoshenko beams made of axially Functionally Graded Material (FGM) under multiple moving point loads. The material properties are assumed to vary continuously in the longitudinal direction according to a predefined power law equation. A beam element, taking the effects of shear deformation and cross-sectional variation into account, is formulated by using exact polynomials derived from the governing differential equations of a uniform homogenous Timoshenko beam element. The dynamic responses of the beams are computed by using the implicit Newmark method. The numerical results show that the dynamic characteristics of the beams are greatly influenced by the number of moving point loads. The effects of the distance between the loads, material non-homogeneity, section profiles as well as aspect ratio on the dynamic responses of the beams are also investigated in detail and highlighted.

• Structural Engineering and Mechanics
• /
• v.46 no.2
• /
• pp.213-229
• /
• 2013

Although performance based assessment procedures are mainly developed for reinforced concrete and steel buildings, URM (Unreinforced Masonry) buildings occupy significant portion of buildings in earthquake prone areas of the world as well as in IRAN. Variability of material properties, non-engineered nature of the construction and difficulties in structural analysis of masonry walls make analysis of URM buildings challenging. Despite sophisticated finite element models satisfy the modeling requirements, extensive experimental data for definition of material behavior and high computational resources are needed. Recently, nonlinear equivalent frame models which are developed assigning lumped plastic hinges to isotropic and homogenous equivalent frame elements are used for nonlinear modeling of URM buildings. The equivalent frame models are not novel for the analysis of masonry structures, but the actual potentialities have not yet been completely studied, particularly for non-linear applications. In the present paper an effective tool for the non-linear static analysis of 2D masonry walls is presented. The work presented in this study is about performance assessment of unreinforced brick masonry buildings through nonlinear equivalent frame modeling technique. Reliability of the proposed models is tested with a reversed cyclic experiment conducted on a full scale, two-story URM building at the University of Pavia. The pushover curves were found to provide good agreement with the experimental backbone curves. Furthermore, the results of analysis show that EFM (Equivalent Frame Model) with Dolce RO (rigid offset zone) and shell element have good agreement with finite element software and experimental results.