• 한국소음진동공학회논문집
• /
• 제22권10호
• /
• pp.949-958
• /
• 2012

Position tracking control of a link of a slave manipulator which needed to track the corresponding link of a master manipulator was addressed in this paper. Since driving torque from motor is transmitted through a set of flexible cable to link, the motion control system is modeled by a two-mass model connected with elastic coupling which has finite stiffness. Relative vibration of two-mass resonant system is a serious problem to operate manipulator. This paper proposed sliding mode control to reduce resonant vibration and fine position tracking control. Also, a pseudo-sliding mode control which uses a saturation function instead of a signum function was discussed and showed that the pseudo-sliding mode control can improve disturbance regulation performance as well as guarantees fine command tracking without chattering which is an inherent drawback of basic sliding mode control. In addition, a disturbance observer based sliding mode control has been suggested to improve disturbance regulation performance. The feasibility of the proposed control design was verified along with some simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.125-130
• /
• 1991

This paper presents a tracking filter using pseudomeasurements in an estimated line-of-sight Cartesian coordinate system(ELCCS) whose x-axis is on the line-of-sight to an estimated target position. A target dynamics model and a measurement equation in the ELCCS are derived first and then a tracking filter in the ELCCS named moving coordinate tracking filter(MCTF) is proposed. It is shown that this MCTF is equivalent to a Kalman filter in the inertial Cartesian coordinate system which is widely used in the target tracking system. By approximating the MCTF for a pseudomeasurement noise and an error covariance matrix in the ELCCS, decoupling of three axes can be achieved. In this case, named decoupled moving coordinate tracking filter(DMCTF), computation time can be drastically reduced by utilizing its parallel structure. Finally, the stochastic properties of the MCTF and DMCTF are presented. Especially, a sufficient condition of nondestabilizing deviation for the DMCTF is proposed. The performance of the MCTF and DMCTF are compared with a conventional Kalman tracking filter.

• 한국군사과학기술학회지
• /
• 제8권3호
• /
• pp.24-32
• /
• 2005

This paper describes the tracking filter performance for Naval Gun Ballistic Computation Unit(BCU). BCU needs tracing filter for gun firing. Using data of tracking sensor, BCU calculates the future position of Target and Gun order in the time of flight. In this paper, tracing filter is designed with interacting multiple model(IMM). The tracking algorithm based on the IMM requirers a considerable number of sub-model for the various maneuvering target in order to have a good performance. But, in the case of ship target, the maneuvering is restricted compared with the air target. Considering the maneuvering properties and adjusting the mode transition probabilities and the process noise of sub-model, We designed the IMM3 algorithm for Naval tracking filter with three sub-model.

• 한국해양공학회지
• /
• 제11권3호
• /
• pp.170-179
• /
• 1997

This paper presents a hybrid navigation system for AUV to locate its position precisely in rough sea. The tracking system is composed of various sensors such as an inclinometer, a tri-axis magnetometer, a flow meter, and a super short baseline(SSBL) acoustic position tracking system. Due to the inaccuracy of the attitude sensors, the heading sensor and the flowmeter, the predicted position slowly drifts and the estimation error of position becomes larger. On the other hand, the measured position is liable to change abruptly due to the corrupted data of the SSBL system in the case of low signal to noise ratio or large ship motions. By introducing a sensor fusion technique with the position data of the SSBL system and those of the attitude heading flowmeter reference system (AHFRS), the hybrid navigation system updates the three-dimensional position robustly. A Kalman filter algorithm is derived on the basis of the error models for the flowmeter dynamics with the use of the external measurement from the SSBL. A failure detection algorithm decides the confidence degree of external measurement signals by using a fuzzy inference. Simulation is included to demonstrate the validity of the hybrid navigation system.

• 전자공학회논문지A
• /
• 제29A권2호
• /
• pp.47-54
• /
• 1992

In this paper, a new extended JPDA (Joint Probabilistic Data Association) tracking algorithm which has more excellent performance than that of the conventional JPDA algorithm in case of the tracking of crossing targets is proposed. In the proposed extended JPDA algorithm, the velocity parameters as well as the position parameters are included to compute the association probabilities between tracks and measurement data. Then the tracking performance of crossing targets is improved and the track bias of parallel moving targets can be reduced. Accordingly, in this paper, the new extended JPDA algorithm for multitarget tracking is proposed and its good performance is shown through the computer simulation. And, tracking performance of extended JPDA algorithm is also compared with that of JPDA algorithm with our noise model.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.203-204
• /
• 2019

Recently, the number of conflicts and complaints related to noise between floors is increasing every year. It is essential to acquisition objective noise data in order to resolve legal disputes over floor noise. However, specialized equipment for noise acquisition is difficult for ordinary apartment dwellers to use. In addition, in order to solve the problem of inter-layer noise, it is most effective to locate and remove the noise. Therefore, this study proposes a floor noise monitoring system for the measurement of floor noise and estimation of the noise source that can be measured without a professional device.

• 대한기계학회논문집A
• /
• 제27권5호
• /
• pp.697-704
• /
• 2003

In this paper, the visual tracking system for arbitrary shaped moving object is proposed. The established tracking system can be divided into model based method that needs previous model for target object and image based method that uses image feature. In the model based method, the reliable tracking is possible, but simplification of the shape is necessary and the application is restricted to definite target mod el. On the other hand, in the image based method, the process speed can be increased, but the shape information is lost and the tracking system is sensitive to image noise. The proposed tracking system is composed of the extraction process that recognizes the existence of moving object and tracking process that extracts dynamic characteristics and shape information of the target objects. Specially, active contour model is used to effectively track the object that is undergoing shape change. In initializatio n process of the contour model, the semi-automatic operation can be avoided and the convergence speed of the contour can be increased by the proposed effective initialization method. Also, for the efficient solution of the correspondence problem in multiple objects tracking, the variation function that uses the variation of position structure in image frame and snake energy level is proposed. In order to verify the validity and effectiveness of the proposed tracking system, real time tracking experiment for multiple moving objects is implemented.

• 반도체디스플레이기술학회지
• /
• 제12권2호
• /
• pp.85-91
• /
• 2013

In this paper, the parabolic antenna aims to the precise location of a moving ship or car that can be designed system using the gyro sensor. The parabolic antenna has controlled by stepping motor that is a lot of noise and slow response of speed. It has solved the problem which is noise and slow response using the BLDC motor. Also, in order to suppress the noise two-axis control and a separate encoder to the six degrees of freedom motion system was implemented in a precise location. Generally, the gyro sensor is not required to system that doesn't move the six degrees of freedom motion system. But the system will be applied to the moving such as ships or cars. Finally, we presented the position control algorithm at the sometimes controlled both gyro sensor and BLDC motor. This system was tracking that the location of the antenna to the desired angle and errors almost didn't happen when the system was moved 6 degrees of freedom.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.152-155
• /
• 1991

A solution to the problem of robot manipulator tracking of a smoothly moving object is given. It is shown that fuzzy prediction rule, fuzzy control can compensate the adverse effects of noise, time delay, unknown object trajectory, and robot modeling uncertainty. Simulations show that the fuzzy logic control results in acceptable precision,

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.700-703
• /
• 1997

A robust controller for a 6 DOF magnetically levitated fine manipulator is presented. The proposed controller consists of following two parts : a model reference controller (MRC) and a H$_{\infty}$ controller (HIC). First, the MRC stabilizes the motion of the manipulator. Then, the motion of the manipulator follows that of the reference model. Second, the HIC minimizes errors generated from the MRC due to noise and disturbance since the HIC is a kind of robust controller. The experiments of position control and tracking control are carried out by use of the proposed controller under the conditions of free disturbances and forced disturbances. Also, the experiments using PID controller are carried out under the same conditions. The results from above two controllers are compared to investigate the control performances. As the results, it is observed that the proposed controller has similar position accuracy but better tracking performances comparing to the PID controller as well as good disturbance rejection effect due to the robust characteristics of the controller. In conclusion, it is verified that the proposed controller has the simple control structure, the good tracking performances and good disturbance rejection effect due to the robust characteristics of the controller..