• English Language & Literature Teaching
• /
• v.10 no.2
• /
• pp.67-87
• /
• 2004

The purpose of this paper is to show how the coda of a syllable and word-final clusters are represented in the English syllable structure. Previous theories on the syllable assume that there is only one segment in the coda position. And, as we know, the theories that license only one segment in the coda make it difficult to syllabicate the word-final cluster appropriately when more than two segments in the word-final cluster are encountered. I considered three approaches: the previous syllable structure (Selkirk, 1982; Borowsky 1989), sonority sequencing (Giegerich, 1992; Roca, 1999) and feature analysis (Goldsmith, 1990), But, all the considered methods don't give us a satisfactory explanation regarding word-final clusters. Finally, I will suggest a modified syllable representation as an alternative by placing two different appendixes under the Phonological Word which forms a constituent above the syllable node. From this it is possible to explain the former problematic word-final clusters including morphological information asan inflectional suffix in the structure.

• MALSORI
• /
• no.33_34
• /
• pp.71-89
• /
• 1997

In the framework of linear representation which allows for no internal structure within features, there is no way to represent nonlinear phonological phenomena such as complex segments. This paper shows how we carl solve some problems of the linear feature theory in relation to the hierarchical feature theory. The purpose of this paper is to explain lateral assimilation under hierarchical feature representation. Although arguments for the position of classes of distinctive features have been made the position of (lateral) remains the issue of debate. Sagey(1988) argues that the feature [lateral] is structurally dependent on the root node. In contrast Rice & Avery (1991) put the feature (lated) under the spontaneous voicing. I have discussed previous studies of feature hierarchy and I propose a revised model of feature representation. Within this model I have shown how well feature geometry describes lateralization as feature spreading.

• Journal of Plant Biology
• /
• v.33 no.2
• /
• pp.127-134
• /
• 1990

Three marine species of Cladophora (Cladophoraceae, Chlorophyta) commonly occurred on the coast of Cheju Island, Cladophora conchopheria Sakai, C. gracilis (Griff.) Kutzing and C. wrightiana Harvey were described morphologically, considering their taxonomic characters. C. conchopheria Sakai, specifically growing on the surface of Lunella coronata, is a very minute plant of 550-990 ${\mu}{\textrm}{m}$ in height and has intracuticular adventitious rhizoids borne from the lower portion of the first to fourth segments. C. gracilis occurs on calm habitat and shows a pseudosympodial growth with pectinate branchlets. c. wrightiana always produces protoplasmic protuberances at the node of middle portion of thallus. It grows to 30 cm or more in height and is dark green in subtidal bottom.

• The KIPS Transactions:PartD
• /
• v.13D no.7 s.110
• /
• pp.879-888
• /
• 2006

Recently many researchers have focused on management of Historical trajectories of moving objects in Euclidean spaces due to numerous sizes of accumulated data over time. However, the movement of moving objects in real applications generally has some constraints, for example vehicles on roads can only travel along connected road networks. In this paper, we propose an indexing method for trajectories of moving objects on road networks in order to process the network-based spatiotemporal range query. Our method contains the connect information of road networks to use the network distance for query processing, deals with trajectories which are represented by road segments in road networks, and manages them using multiple R-trees assigned per each road segment. Furthermore, it has a structure to be able to share R-tree among several road segments in large road networks. Consequently, we show that our method takes about 30% less in node accesses for the network-based spatiotemporal range query processing than other methods based on the Euclidean distance by experiments.

• Journal of Bio-Environment Control
• /
• v.14 no.4
• /
• pp.298-301
• /
• 2005

Potato (Solamum tuberosum 'Dejima') plantlets were investigated on culture type and initial quantity of inoculation in bioreactor and survival rate by hydroponics for mass production. rode stems (1 to 1.5cm in length) of potato plantlets multiplied in vitro were grown for 3 weeks in liquid Murashige and Skoog (MS) medium with sucrose $30 g\; L^{-1}$. When plantlets (80-node inoculation) were raised in 10L balloon type bubble (BB) bioreactor, the healthiest growth of plantlets was obtained from explants cultured in ebb & flow culture with medium supplied periodically 12 times per day. The suitable inoculation quantity of 20L BB bioreactor was 120 pieces of stem segments (mean 2.2g fresh weight) in ebb & flow culture. Number of nodal shoot was eight on the average. In controlled culture room, survival rate of plantlets at 7 days after stem cutting was above $70\%$ when they were acclimatized by hydroponics grown in deep flow and solid medium culture. The highest survival rate of the stem cutting plantlets was in nutrient solution adjusted to EC $1.4dS{\cdot}m^{-1}$. Stem cutting plantlets through one culture could be obtained $670\~900$, when plantlets were grown in ebb & flow culture during 3 weeks using a 20L bioreactor with initial 120 pieces of nodal segments. 11 is possible In do mass production of seedlings cultured in bioreactor and hydroponics.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.3
• /
• pp.576-585
• /
• 2002

A three-dimensional Lagrangian explicit time-integration finite element code for analyzing the dynamic impact phenomena was developed. It uses four node tetrahedral elements. In order to consider the effects of strain rate hardening, strain hardening and thermal softening, which are frequently observed in high-velocity deformation phenomena, Johnson-Cook model is used as constitutive model. For more accurate and robust contact force computation, the defense node contact algorithm was adopted and implemented. In order to evaluate the performance of the newly developed three-dimensional hydrocode NET3D, numerical simulations of the oblique impact of mild steel plate by mild steel sphere were carried out. Ballistic limit about various oblique angle between 0 degree and 80 degree was estimated through a series of simulations with different initial velocities of sphere. Element eroding by equivalent plastic strain was applied to mild steel spheres and targets. Ballistic limits and fracture characteristics obtained from simulation were compared with experimental results conducted by Finnegan et al. From numerical studies, the following conclusions were reached. (1) Simulations could successfully reproduce the key features observed in experiment such as tensile failure termed "disking"at normal impacts and outwards bending of partially formed plus segments termed "hinge-mode"at oblique impacts. (2) Simulation results fur 60 degrees oblique impact at 0.70 km/s and 0.91 km/s were compared with experimental results and Eulerian hydrocode CTH simulation results. The Lagrangian code NET3D is superior to Eulerian code CTH in the computational accuracy. Agreement with the experimentally obtained final deformed cross-sections of the projectile is excellent. (3) Agreement with the experimental ballistic limit data, particularly at the high-obliquity impacts, is reasonably good. (4) The simulation result is not very sensitive to eroding condition but slightly influenced by friction coefficient.

• Solar Energy
• /
• v.11 no.3
• /
• pp.44-52
• /
• 1991

The benefits of thermal stratification in sensible heat storage systems has been considered and studying by several investigators. In this paper, the basic data which is hard to obtain normally through the experiment were obtainable through the computer simulation. The major objectives of the study were to assess the benefits of stratified storage in residential solar water heating application and to suggest the optimum design parameters. From the computer simulation, following results were obtained. 1. The solar load fraction increases with increasing the number of tank segments. In these simulation, the magnitude of the improvement was about 10%. 2. The solar load fraction increases when the ratio of diameter to height of the tank(H/D) increases to 3, but H/D exceed 3 then, the solar load fraction decreases. In these simulation, the magnitude of the improvement was about 3%. 3. Increasing the collector flow rate slightly improved the performance of the mixed storage system(Node=1). But, for the stratified storage system(Node=N), the solar load fraction increases with decreasing flow rate until the point is reached at which the collector outlet temperature reaches the boiloff limit of $100^{\circ}C$ over some portion of the simulation period.

• Convergence Security Journal
• /
• v.22 no.4
• /
• pp.169-178
• /
• 2022

In general, organizations operating multi-domain networks find it difficult to represent and manage multiple domain net works on a single screen space. Instead, most of them are managed with multiple screens visualizing network topology by domain or partitioning one screen area into multiple domains. We propose an efficient method to visualize the topology using only minimal connection information between domain-agnostic nodes in this work. This method visualizes the topology by utilizing centrality indices representing the influence of nodes in the network. Furthermore, the method dynamically segments the entire node's display area using virtual Root nodes to auto-separate domains and weights of child nodes and placing nodes in 3D space. Thus, although it is a straightforward method, the multi-domain network topology can be visualized with only minimal connection information between nodes.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.1
• /
• pp.1-6
• /
• 2001

The timing for the determination in root formation from nodal and internodal explants of cassava (Manihot esculenta Crantz, cv. MCol 22) was investigated. Nodal explants about 10 mm with an axillary bud formed adventitious roots directly on MS basal medium for 8 days of cultures. But internodal segments without an axillary bud did not develop the adventitious roots on the same medium, and most internodal segments excised from nodal explants after cultures of 5 days on MS basal medium developed adventitious roots. On the other hand, the internodal segments rooted at 90% after cultures on medium with 0.5 mg/L IBA for 5 days, with 1 mg/L IBA for 2.5 days, and with 2 mg/L IBA for 1.5 days respectively. Thus the period of culture on medium with IBA and its IBA concentration affected the rooting rate. Therefore, it is suggested that the determination for root formation occurred before the differentiation of root primordia on medium with IBA, and root inducing factors in medium were absorbed and accumulated during the period of determination for root primordium differentiation in internodal segment of cassava.

• Structural Engineering and Mechanics
• /
• v.52 no.2
• /
• pp.221-238
• /
• 2014

A four-noded curved shell finite element for the geometrically non-linear analysis of beams curved in plan is introduced. The structure is conceived as a sequence of macro-elements (ME) having the form of transversal segments of identical topology where each slice is formed using a number of the curved shell elements which have 7 degrees of freedom (DOF) per node. A curved box-girder beam example is modelled using various meshes and linear analysis results are compared to the solutions of a well-known computer program SAP2000. Linear and non-linear analyses of the beam under increasing uniformly distributed loads are also carried out. In addition to box-girder beams, the proposed element can also be used in modelling open-section beams with curved or straight axes and circular plates under radial compression. Buckling loads of a circular plate example are obtained for coarse and successively refined meshes and results are compared with each other. The advantage of this element is that curved systems can be realistically modelled and satisfactory results can be obtained even by using coarse meshes.