• Journal of Animal Science and Technology
• /
• v.63 no.2
• /
• pp.305-318
• /
• 2021

Alfalfa (Medicago sativa L.) is an important forage legume grown in Kansas, USA and its productivity with cool-season grasses however is unknown. The objective of this study was to determine the dry matter yield (DMY) and forage nutritive value of alfalfa-grass mixtures compared to those of alfalfa and grasses grown in monoculture with and without nitrogen fertilization. Three different alfalfa varieties were planted (reduced-lignin alfalfa, Roundup Ready, and conventional alfalfa) and two kinds of cool-season grasses (smooth brome, Bromus inermis Leyss, and tall fescue, Festuca arundinacea Schreb) were planted as a monoculture or in alfalfa-grass mixtures. Nitrogen fertilizer (urea) was applied at green-up at a rate of 56 kg/ha and after the second cutting at a rate of 56 kg/ha in 2016 and 2017, respectively. and control treatments received no nitrogen. DMY was significantly higher in monoculture alfalfa and alfalfa-grass mixtures than in grass monocultures. Between alfalfa monoculture and alfalfa-grass mixtures, no significant differences in DMY were found. For all treatments, nitrogen application significantly increased DMY compared to the control. In 2016 and 2017, the low-lignin alfalfa monoculture had the lowest acid detergent fiber (ADF) and the grass monocultures had the highest ADF. In 2016 and 2017, neutral detergent fiber (NDF) in smooth bromegrass and tall fescue was higher than in other species treatments. A low-lignin alfalfa monoculture had significantly lower NDF concentration compared to alfalfa-grass mixtures. When averaged over 2016 and 2017, relative feed value (RFV) was highest in low-lignin alfalfa and lowest in the grass monocultures. In both years, nitrogen fertilizer application did not affect nutritive values.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.7 no.1
• /
• pp.25-30
• /
• 1987

There are differences in opinion as to whether nitrogen fertilizer should be used when establishing alfalfa (Medicago sativa L.). Various reports show that under a hot environment, rhizobia (Rhizobium meliloti) are not as effective in fixing atmospheric nitrogen as they are under moderate temperatures. It is also believed that the addition of nitrogen fertilizer inhibits nodulation of alfalfa seedlings. A replicated experiment was conducted under controlled environmental conditions at the University of Nevada-Reno, Reno, Nevada, USA, to determine the effects of nitrogen application on seedling growth and nodulation of alfalfa grown in a hot environment. Sterile sand was used as the growing media to which a complete nutrient solution minus nitrogen was applied volumetrically to each pot daily. In addition, half of the pots received NH4-$NO_3$, at the rate of 11.2 kg per ha at seeding and at two and four weeks after planting giving a total nitrogen application rate of 33.6 kg per ha during the seven-week experimental period. Rhizobia inoculant (R-12) consisted of a mixture of strains 171-15a, 1682c and 80 PI 265 of (Rhizobium meliloti). Inoculant was applied to the seeds prior to planting and to the sand media at two and four weeks after seeding. Twenty seeds were planted in pots 14.0 cm in diameter and 11.5 cm deep. Plants were thinned to ten plants per pot after emergence and were grown in a controlled environment chamber with a 16-hour light period. Soil temperature at 6 cm depth ranged from 17.4^{\circ}C.$ to 31.1^{\circ}C.$ and had a daily mean of 26.5^{\circ}C.$. Plants were harvested at weekly intervals for seven weeks. Root, shoot and total length, dry weight, volume and number of nodules per plant were determined. Root, shoot, and total length were greater in seedlings grown in soil where nigrogen was applied than that grown in soil to which no nitrogen was applied. The average size of the seedlings as determined by volume and weight was more than two times greater where plants were fertilized with nitrogen. Nodule number per seedling was also greater when nitrogen was applied compared to those which received no nitrogen. The differences were greater as the plants became older. The rhizobia did not fix enough nitrogen for adequate growth of seedlings. This is probably due to high temperature growing conditions that caused the rhizobia to become relatively ineffective as compared to cooler growing conditions. Data suggests it would be desirable to apply nitrogen at seeding when alfalfa is established under hot conditions that occur in mid- or late summer.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.1
• /
• pp.58-62
• /
• 1985

Three rates of nitrogen, phosphate and potassium were applied to a old tobacco Hyangcho for the establishment of the optimum rate of fertilizers for Growth and chemical component. 1. The rate increament of nitrogen and potassium increased tobacco growth, but the effect of phosphate was non-significant between rates. 2. The contents of total-nitrogen and total-alkaloid in the leaf increased with increase of nitrogen rate while the effect of phosphate and potassium were negligible.

• Journal of Environmental Science International
• /
• v.14 no.2
• /
• pp.157-165
• /
• 2005

This study was conducted to determine optimum design parameters in nitrification and denitrfication of chemical fertilizer wastewater using pilot plant, Jet Loop Reactor. The chemical fertilizer wastewater which contains low amounts of organic carbon and has a high nitrogen concentration requires a post-denitrfication system. Organic nitrogen is hydrolyzed above $86\%$, and the concentration of organic nitrogen was influent wastewater 126mg/L and of effluent wastewater 16.4mg/L, respectively. The nitrification above $90\%$ was acquired to TKN volumetric loading below $0.5\;kgTKN/m^3{\cdot}d$, TKN sludge loading below $0.1\;kgTKN/kgVSS{\cdot}d$ and SRT over 8days. The nitrification efficiency was $90\%$ or more and the maximum specific nitrification rate was $184.8\;mgTKN/L{\cdot}hr$. The denitrification rate was above $95\%$ and the concentration of $NO_3-N$ was below 20mg/L. This case was required to $3\;kgCH_3OH/kgNO_3-N$, and the effluent concentration of $NO_3^--N$ was below 20mg/L at $NO_3^--N$ volumetric loading below $0.7\;kgNO_3^--N/m^3{\cdot}d$ and v sludge loading below $0.12\;kgNO_3^-N/kgVSS{\cdot}d$. At this case, the maximum sludge production was $0.83\;kgTS/kgT-N_{re}$ and the specific denitrfication rate was $5.5\;mgNO_3-N/gVSS{\cdot}h$.

• Journal of Nutrition and Health
• /
• v.28 no.4
• /
• pp.291-297
• /
• 1995

This study aimed to verify the nutritional and curative effects of protein hydroysate in rats model with gastric ulcer induced by restraint and water-immersion stress. Sprague-Dawley, famale rats weighing approximtely 200g were forced in 5$\times$5$\times$15cm plexiglas cage. The restraint and water immersion stress was carried at 20$\pm$2$^{\circ}C$ for 8-hours. After stress 4 kinds of diets(10% casein, 20% casein, 10% casein hydrolysate, 20% casein hydrolysate) were given for 5 days. In the gastric ulcer rats model, the growth, gastric emptying rate, trypsin activity in gastrointestinal content, plasma total protein, albumin, $\alpha$-amino-N, UUN, creatinine and hydroxyproline of the urine and nitrogen retention were analyzed for nutritional effects of dietary nitrogen levels(10%, 20%) and sources (casein, casein hydrolysate). The results were as follows ; In gastric ulcer rats model, severeness of ulcer, plasma protein, gastric emptying rate, nitrogen retention rate were not different between 20% casein-fed group and 20% casein hydrolysatefed group. But 10% casein hydrolysate-fed group had more curative group. The casein hydrolysate diet-fed group was lower trysin activity in small intestianl content than the casein-fed group, at both casein level(10%, 20%). Finally at 20% levels, there was no difference between casein and casein hydrolysate diet, but 10% level, casein hydrolysate diet was more curative of ulcer than casein diet in gastric ulcer rat model. The results of this study provide useful information concerning diet therapy for the patients with gastrointestinal diseases and the field of enteral diet materials.

• The Korean Journal of Ceramics
• /
• v.4 no.4
• /
• pp.279-285
• /
• 1998

The $UO_2$ pellets are usually sintered under hydrogen gas atmosphere. Hydrogen gas may cause unexpected early failure of the refractory bricks in the sintering furnace. In this work, nitrogen was mixed with hydrogen to investigate the effect of nitrogen gas on a failure machanism of the refractory bricks and on the microstructure of the $UO_2$ pellet. The hydrogen-nitrogen mixed gas experiments show that the larger nitrogen the mixed gas contains, the less the refractory materials are reduced by hydrogen. The weight loss measurements at $1400^{\circ}C$ for fire clay and chamotte refractories containing high content of $SiO_2$ indicate that the weight loss rate for the mixed gas is about half of that for the hydrogen gas. Based on the thermochemical analyses, it is proposed that the weight loss is caused by hydrogen-induced reduction of free $SiO_2$ and/or $SiO_2$ bonded to $Al_2O_3$ in the fire clay and chamotte refractories. However, the retardation of the hydrogen-induced $SiO_2$ reduction rate under the mixed gas atmosphere may be due to the reduction of the surface reaction rate between hydrogen gas and refractory materials in proportion to volume fraction of nitrogen gas in the mixed gas. On the other hand, the mixed gas experiments show that the test data for $UO_2$ pellet still meet the related specification values, even if there exists a slight difference in the pellet microstructural parameters between the cases of the mixed gas and the hydrogen gas.

• Journal of Korean Society on Water Environment
• /
• v.31 no.5
• /
• pp.556-562
• /
• 2015

In order to remove the organic substances and the nitrate-nitrogen contained in wastewater, some researchers have studied the simultaneous removal of organics and nitrogen by using different biocathode microbial fuel cells (MFCs). The operating conditions for removing the contaminants in the MFCs are the external resistances, HRTs, the concentration of the influent wastewater, and other factors. This study aimed to determine the effect of the external resistors and organic loading rates, from the changing HRT, on the removal of the organics and nitrogen and on the production of electric power using the Denitrification Biocathode - Microbial Fuel Cell (DNB-MFC). As regards the results of the study, the removal efficiencies of $SCOD_{Cr}$ did not show any difference, but the nitrate-nitrogen removal efficiencies were increased by decreasing the external resistance. The maximum denitrification rate achieved was $129.2{\pm}13.54g\;NO_3{^-}-N/m^3/d$ in the external resistance $1{\Omega}$, and the maximum power density was $3,279mW/m^3$ in $10{\Omega}$. When the DNB-MFC was operated with increasing influent organic and nitrate loading by reducing the HRTs, the $NO_3{^-}-N$ removal efficiencies were increased linearly, and the maximum nitrate removal rate was $1,586g\;NO^3{^-}-N/m^3/d$ at HRT 0.6 h.

• Corrosion Science and Technology
• /
• v.2 no.6
• /
• pp.272-276
• /
• 2003

High nitrogen-bearing stainless steel (HNS) containing more than Imass% N was successfully created by means of pressurized electro-slag remelting (P-ESR) without the addition of manganese. Excellent localized corrosion resistant properties of the HNS were confirmed in terms of pitting and crevice corrosion in artificial seawater. The repassivation kinetics proved higher repassivation rate for HNS.

• Journal of Environmental Health Sciences
• /
• v.32 no.1 s.88
• /
• pp.27-35
• /
• 2006

This study was carried out to investigate the removal of nitrogen and phosphorus in municipal sewage depending on existence of biological coated media in BCM reactor. The reactor with biological coated media is the process combining $A_2/O$ process. The removal efficiencies for $COD_{Mn},\; BOD_5,\;SS$, T-N and T-P were $78\%,\;90.5\%,\;92.3\%,\;61.9\%,\;60.2\%$, respectively. The specific nitrification rate$(mgNO_3-N/gMLSS{\cdot}d)$ of Contact aeration basin was 52.2 and the specific denitrification rate$(mgNO_3N/gMLSS{\cdot}d)$ in anoxic basin was 95.1. Also, phosphorus release$(mgPO_4-P/gMLSS{\cdot}d)$ in Anaerobic basin was 71.8 and Phosphorus uptake$(mgPO_4-P/gMLSS{\cdot}d)$ in contact aeration was 27.1.

• Journal of Nutrition and Health
• /
• v.24 no.1
• /
• pp.20-29
• /
• 1991

This study was carried out to compare the protein quality of lamb and beef meat. by feeding to growing rats. Sixty weanling rats, 30 males and 30 females, were blocked into 12 groups(6 gruops of males and 6 groups of females). They were fed casein. beef, or lamb as a protein source at two levels, 6 and 15%, for 5 weeks. The amount of food intake. food efficiency ratio, protein efficiency ratio. body weight gain. and the weights of skeletal muscles and liver were measured. Nitrogen retention, protein content in the liver and skeletal muscles, and the levels of protein and cholesterol in the serum were also assayed. Summarzing the results, there were no significant differences between lamb and beef on the growth and nitrogen utilization in the rats fed same percentage of protein diet. However. rats fed 15% protein diet showed significantly higher growth rate than those fed 6%. Therefore, it can be concluded that lamb is as good a protein food as beef in terms of protein quality.