• 대한전자공학회논문지
• /
• 제25권11호
• /
• pp.1350-1357
• /
• 1988

독립적인 nitridation step이 포함된 급속 열처리 공정을 이용하여 125-180A 두께의 이중 절연박막을 단결정 실리콘 상에 형성하였다. HCl 가스의 첨가량과 공정시간의 변화에 따른 박막 특성의 변화를 고찰하였고, 이에 따른 박막의 전기적 특성을 관찰하였다. HCl 가스의 첨가에 의해 초기의 산화막 두께의 성장은 현저하게 나타났으나, nitridation 후의 박막두께의 변화는 10A 이하로 매우 저조하였다. 이중 절연박막의 항복전압은 HCl 가스의 첨가량에 비례하여 점차 증가하였고, 절연강도는 furnace나 독립적인 nitridation step이 포함되지 않은 급속 열처리 공정으로 형성한 같은 두께의 박막에 비해 높은 것으로 분석되었다.

• 한국결정성장학회지
• /
• 제29권4호
• /
• pp.149-153
• /
• 2019

HVPE는 GaN 단결정의 제조 방법 중 하나로 빠른 성장 속도가 장점인 상업적으로 널리 사용되는 성장 방법이다. HVPE 법에 의한 GaN 단결정 성장은 여러 공정으로 이루어지며, 특히 GaN 성장 전 기판의 질화 처리는 성장되는 GaN 단결정 품질에 상당한 영향을 미친다. 본 연구에서는 사파이어 기판 위에 GaN 단결정 성장 시 기판의 질화처리가 성장되는 GaN 단결정 품질에 미치는 영향을 알아보고자 하였다. 질화 처리를 제외한 다른 성장 조건은 동일하게 하였고 질화처리 시 기판에 공급되는 가스 유량을 다양하게 변화시킨 후 GaN 박막을 성장시키고, 성장된 GaN의 표면 특성평가를 통하여, HVPE 법에서의 질화처리 효과를 고찰하여 보고자 하였다.

• 한국세라믹학회지
• /
• 제25권5호
• /
• pp.561-569
• /
• 1988

Mixtures of very small amounts of additive, carbon and silica(about 0.46${\mu}{\textrm}{m}$) which synthesized by the hydrolysis of ethyl silicate, the molar ratio of SiO2/C was fixed to 1/10, was nitrided at 145$0^{\circ}C$. It was considered that the optimum amount of additive to promote the nitridation reaction was below 2.0wt%. By the addition of additive, the nitridation reaction was promoted and formation of $\beta$-Si3N4 was promoted at 145$0^{\circ}C$ for 1hour, but, the nitridation reaction was decreased and the ratio of $\alpha$/$\beta$ of Si3N4, was increased at 145$0^{\circ}C$ for 5 hours. The crystal phase was $\alpha$ phase and the nitridation reaction was promoted and the particle size of silicon nitride was become smaller by the addition of $\alpha$-Si3N4, but silicon nitride of whisker-like form was produced by the addition of transition elements. There was a difference in the lattice constants of $\alpha$-Si3N4, but no difference in its of $\beta$-Si3N4 according to kinds of added substance and reaction time.

• 한국세라믹학회지
• /
• 제31권8호
• /
• pp.893-901
• /
• 1994

In this study, AlN powder of fine particle size and of high purity was synthesized by the carbothermal reduction-nitridation of monodisperse, spherical Al(OH)3 which had been prepared by sol-gel method using Al(O-sec-C4H9)3 as the starting material. Depending on the mixing order and kinds of reducing agents, the optimum condition for the preparation of AlN was determined as follows. AlN single-phase was produced by the carbothermal reduction-nitridation of (1) Benzene-washed Al(OH)3 and the reducing agent, carbon, which was mixed in a ball mill: for 5 hours at 140$0^{\circ}C$ under NH3 atmosphere; (2) The mixture prepared by hydrolysis of alkoxide solution into which carbon had been dispersed beforehand: for 5 hours at 135$0^{\circ}C$ ; (3) Al(OH)3 Poly(furfuryl alcohol) composite powder: for 2.5 hours at 135$0^{\circ}C$; (4) The mixture of Al(OH)3 and polyacrylonitrile: for 5 hours at 140$0^{\circ}C$. Addition of CaF2 increased the nitridation rate when carbon or polyacrylonitrile was used as the reducing agent; but it had no effect on the nitridation rate when furfuryl alcohol was used as the reducing agent.

• 한국세라믹학회지
• /
• 제43권8호
• /
• pp.472-478
• /
• 2006

The effect of compositional and processing variables on a nitriding reaction of silicon powder compact and subsequent post sintering of RBSN (Reaction-Bonded Silicon Nitride) was investigated. The addition of a nitriding agent enhanced nitridation rate substantially at low temperatures, while the formation of a liquid phase between the nitriding agent and the sintering additives at a high temperature caused a negative catalyst effect resulting in a decreased nitridation rate. A liquid phase formed by solely an additive, however, was found to have no effect on nitridation for the additive amount used in this research. The original site of a decomposing pore former was loosely filled by a reaction product ($Si_3N_4$), which provided a specimen with nitriding gas passage. For SRBSN (Sintered RBSN) specimens of high porosity, only a marginal dimensional change was measured after post sintering. Its engineering implication for near-net shaping ability is discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.48-51
• /
• 2004

In this paper the importance of re-nitridation on a plasma-enhanced chemical-vapor deposited(PECVD) $SiO_2$ stacked on a thermally grown thin-nitrided $SiO_2$ on n-type 4H SiC have been investigated. Without the final re-nitridation process, the leakage current of metaloxidesemiconductor(MOS) was extremely large. It is believed that water and carbon, contamination from the low-thermal budget PECVD process, are the main factors that destroyed the high quality thin-buffer nitrided oxide. After re-nitridation annealing, the quality of the stacked gate oxide was improved. The reasons of this improvement are presented.

• 한국재료학회지
• /
• 제31권11호
• /
• pp.635-641
• /
• 2021

Cr thin films with O added are deposited on sapphire substrate by DC sputtering and are nitrided in NH₃ atmosphere between 300 and 900 ℃ for various times. X-ray diffraction results show that nitridation begins at 500 ℃, forming CrN and Cr₂N. Cr oxides of Cr₂O₃ are formed at 600 ℃. And, at temperatures higher than 900 ℃, the intermediate materials of Cr₂N and Cr₂O₃ disappear and CrN is dominant. The atomic concentration ratios of Cr and O are 77% and 23%, respectively, over the entire thickness of as-deposited Cr thin film. In the sample nitrided at 600 ℃, a CrN layer in which O is substituted with N is formed from the surface to 90 nm, and the concentrations of Cr and N in the layer are 60% and 40%, respectively. For this reason, CrN and Cr₂N are distributed in the CrN region, where O is substituted with N by nitridation, and Cr oxynitrides are formed in the region below this. The nitridation process is controlled by inter-diffusion of O and N and the parabolic growth law, with activation energy of 0.69 eV.

• 한국세라믹학회지
• /
• 제21권3호
• /
• pp.253-258
• /
• 1984

This paper deals with the reaction-bonded silicon nitride I terms of its microstructural development during nitrida-tion. Silicon powder compacts were reacted with nitrogen at 1185$^{\circ}C$ and 13$65^{\circ}C$ according to the nitriding schedule. Microstructures of nitrided specimens were examined by means of optical and scanning electron microscope to discuss the nitridation or microstructural development at initial and intermediat stage of nitridation. Reaction products were also analysed by X-ray diffraction method at each stage of nitridation. The results indicate that ho-mogeneous and uniform microstructure with find porosity can be obtained only under the reaction condition. such as slow and relatively constant reaction rate with time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 춘계학술대회 논문집
• /
• pp.24-26
• /
• 1988

The electrical properties of thin nitrided thermal oxides prepared by rapid thermal nitridation(RTN) have been studied. The flatband voltages were calculated using C-V measurement and found to vary as nitridation time and temperature. After nitridation an increase in the fixed oxide charge density was always observed, but the distribution of it as a function of annealing time was found to be random. The breakdown voltages were measured using curve tracer.

• Progress in Superconductivity
• /
• 제4권1호
• /
• pp.64-67
• /
• 2002

The attenuation of millimeter waves (70-100 ㎓) propagating along Josephson Junction stripline had been measured by pattern recognition near gap voltage and proximity current bump. Test series arrays of 2000, 3000, and 4000 Josephson junctions with the area of $12\mu\textrm{m}$$\times$ $38\mu\textrm{m}$ had two sub-arrays with 50 Junctions at both ends. The arrays were fabricated with and without applying a plasma nitridation process to Nb ground plane. The effects of a nitridationprocess measured by the pattern recognition near gap voltage and proximity current bump were about 1.3-1.7 ㏈ and 1.6-1.8 ㏈, respectively. This means that the last sub-arrays with a nitridation process receive 26-34% more power than those without a nitridation process.