• 한국환경과학회지
• /
• 제12권6호
• /
• pp.659-664
• /
• 2003

The experiment was carried out to investigate the effects of sulfuric acid and nitric acid among the main components of simulated acid rain (SAR) on the growth of vegetative organs and seed germination of Arabidopsis thaliana. The Arabidopsis treated with SAR supplemented with sulfuric and nitric acids, respectively, showed 28% and 30% decrease of shoot and root growth compared to the control plants, and also many necrotic spots on leaf surfaces after SAR treatment were observed. The shoot and root length for plants grown with nitric acid rain was 14% and 17% lower, respectively, compared to the control, whereas those grown with sulfuric acid rain was 24% and 25% lower than control plants. When Arabidopsis seeds were sown in distilled water, germination rate was 100% after 7 days. However, 80% in SAR medium supplemented with sulfuric and nitric acids, 88% in sulfuric acid rain medium and 93% in nitric acid rain medium. The germination abilities of seeds harvested from SAR supplemented with sulfuric and nitric acids, sulfuric acid rain, and nitric acid rain were 73%, 73% and 94%, respectively. Consequently, sulfuric acids showed more inhibitory effects than nitric acids on the growth of vegetative organs as well as germination rates in Arabidopsis.

• 한국표면공학회지
• /
• 제49권3호
• /
• pp.231-237
• /
• 2016

This article reports a new chemical bath for preparing a mirror-like surface of AZ31 Mg alloy. In order to find an appropriate chemical polishing solution, four different acidic solutions of sulphuric acid, nitric acid, acetic acid and a specially designed mixture of nitric acid and acetic acid were investigated in view of the changes in surface appearance, roughness and dissolution rate of AZ31 Mg alloy. The surface scales on AZ31 Mg alloy were readily removed by all the acidic solutions, but a reflective surface was produced only by etching in the specially designed solution, and only after a specific etching time. The surface roughness increased with etching time in sulphuric acid, nitric acid, and acetic acid, but it lowered after a specific etching time in the specially designed mixture of nitric acid and acetic acid. Dissolution rate of the alloy in the specially designed mixture of nitric acid and acetic acid appeared to be more than twice than that in separate nitric acid or acetic acid. In this work, we recommend the mirror-like surface of AZ31 Mg alloy obtained by polishing for an optimum time in a mixture of nitric acid and acetic acid for following surface finishings, chemical conversion coating, electroplating, electrophoretic painting and anodizing treatment.

• 자원리싸이클링
• /
• 제7권5호
• /
• pp.46-51
• /
• 1998

질산계 에칭폐액으로부터 질산과 유가금속을 분리하여 재활용하기 위하여 용매추출법을 이용하여 질산성분을 회수하기 위한 기초 연구를 수행하였다. 주요 실험내용으로는 추출제의 종류와 농도에 따라 질산의 추출거동을 조사하였고, 질산의 추출시 구리, 납, 철, 주석 등의 금속이온들과의 분리성을 고찰하였다. 또한 McCabe-Thiele 그림으로부터 질산성분을 추출과 탈거에 필요한 이론적인 단수를 분석하였다. 실험 결과 TBP가 Alamine336에 비하여 질산의 회수에는 유리하였으며 TBP는 유기상의 60∼70%가 적합하였으며 폐액상의 질산농도가 0.1N 이상인 경우에는 각 금속성분들이 추출되지 않았으며 60%TBP를 사용하여 O/A비가 3인 경우 5단으로 95%이상의 질산이 추출되었다. 한편, 질산이 추출된 유기상으로부터 탈거 실험의 경우 초기농도가 80 g/l일 때 증류수에 의해 O/A비가 2에서 4단으로 98%이상의 탈거율을 나타내었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.140-143
• /
• 2001

A study has been made on the recovery of nitric acid and valuable metals such as Cu, Sn, Pb from the spent nitric etching solutions. The nitric acid was extracted effectively by TBP but the heavy metals such as Fe, Cu, Sn, Pb were not extracted by TBP from the spent nitric etching solutions. From the experimental results, 95% of nitric acid in spent etching solution was extracted at O:A ratio of 3:1 with five stage by 60% TBP and 98% of nitric acid was stripped from the loaded organic phase at O:A ratio of 1:1 with four stages by distilled water. After extracting nitric acid, Cu was recovered as a metal by electrowinning effectively and Sn was successfully removed by precipitation method by adjusting the pH of raffinate solution. Finally, Pb was recovered by cementation with iron scrap at $65^{\circ}C$. Parameters controlling the cementation process, such as temperature, pH and the effect of the additives were investigated.

• 자원리싸이클링
• /
• 제18권5호
• /
• pp.44-51
• /
• 2009

전자스크랩중에 함유된 구리 및 주석을 습식공정으로 회수하기 위하여 기초 연구를 실시하였다. 침출제로 질산을 이용하여 분쇄된 전자스크랩에서 구리, 주석, 납, 철 등의 금속 성분들에 대한 침출율을 조사하고 최적 침출조건을 제시 하였다. 이러한 질산 침출 용액으로부터 TBP를 이용하여 유리질산을 분리 추출하여 재활용하기 위한 기초 연구를 실시하였다. 실험 결과 3.0-4.0 M 질산으로 구리를 효과적으로 침출시킬 수 있었으며, 질산 침출액 중 유리질산을 60% TBP에 의해 95%정도 추출이 가능하였고, 유기상에 추출된 질산의 98%를 증류수에 의해 탈거하여 질산침출액으로 재사용이 가능하였다.

• Restorative Dentistry and Endodontics
• /
• 제6권1호
• /
• pp.37-50
• /
• 1980

Scanning Electron Microscopic (SEM) examination on the labial surface of 91 permanent upper incisors were made after etching procedure with phosphoric acid, sulfuric acid, nitric acid, hydro chloric acid, oxalic acid, formic acid, citric acid and zinc phosphate liquid for 2 minutes. Following results were obtained. 1. In the surfaces etched by 10%. 50% phosphoric acid, 50% sulfuric acid, 10%. 30% nitric acid, 10%. 50% oxalic acid, 10%. 30%. 50% formic acid, 30%. 50% citric acid and zinc phosphate liquid, there appeared to be a preferential removal of prism cores, but in the surfaces etched by 10% phosphoric acid, 50% nitric acid, 10%. 30% hydrochloric acid and 30% oxalic acid, the prism peripheries were removed preferentially. 2. According to Silverstone classification on enamel etching pattern the surface treated by zinc phosphate liquid, 30. 50% citric acid, 10%. 30%. 50% formic acid, 10%. 50% oxalic acid, 10%. 30% nitric acid, 50% sulfuric acid and 10%. 50%. phosphoric acid showed Type 1, and etched by 30% oxalic acid, 10%. 30% hydrochloric acid, 50% nitric acid and 10% phosphoric acid showed Type II. Etching of prism cores was by far the most common occurence. The changes produced could be related to intrinsic differences in histology and / or solubility of enamel.

• 방사성폐기물학회지
• /
• 제18권4호
• /
• pp.457-464
• /
• 2020

In this study, extraction of uranium(VI) from an aqueous nitric acid solution was investigated using tri-n-butyl phosphate (TBP) as an extractant in an ionic liquid, 1-alkyl-3-methylimidazolium bis (trifluoromethylsulfonyl)imide ([Cnmim][Tf2N]). The distribution ratio of U(VI) in 1.1 M TBP/[Cnmim][Tf2N] was significantly high when the concentration of nitric acid was low. The value of the distribution ratio decreased as the concentration of the nitric acid increased at lower acidities, and then increased with a nitric acid concentration of up to 8 M. This can be attributed to the different extraction mechanisms of U(VI) based on nitric acid concentrations. Thus, a cation exchange at low acidity levels and an ion-pair extraction at high acidity levels were suggested as the extraction mechanism of U(VI) in the TBP/[Cnmim][Tf2N] system.

• 대한의생명과학회지
• /
• 제25권2호
• /
• pp.196-200
• /
• 2019

Effect of retinoids, i.e., all-trans retinoic acid and 13-cis retinoic acid, on the activity of nitric oxide synthase (NOS) was evaluated in human malignant keratinocytes to examine the possible correlation of retinoids with NOS activities. All-trans retinoic acid and 13-cis retinoic acid did not alter the nitric oxide (NO) production. However, in the presence of lipopolysaccharide (LPS, $1{\mu}g/mL$), they significantly increased NO release in a dose-dependent manner until 48 h at concentrations of $50{\sim}100{\mu}M$. The degree of upregulation of NO by all-trans retinoic acid and 13-cis retinoic acid increased up to 35% and 37%, respectively, compared to that by the control, which demonstrated the upregulation of LPS-inducible nitric oxide synthase (iNOS)-dependent generation of NO as well as showing a crucial link between retinoids-induced activity and NOS. Findings of this study now suggest that the upregulation of LPS-iNOS activity may be associated with modulation of retinoids-induced control of cellular developmental processes, which may produce new therapeutics of retinoids in the complexity of how NO affects human keratinocytes.

• 자원리싸이클링
• /
• 제26권1호
• /
• pp.51-58
• /
• 2017

TBP(tributyl phosphate)를 사용하여 왕수 침출액으로부터 질산과 금을 추출하여 회수하는 공정을 개발하기 위한 기초연구가 수행되었다. 순수한 왕수용액으로부터 추출제의 농도, 질산과 염산의 농도 비에 따른 질산의 추출거동을 조사하였으며, 금을 함유하는 왕수용액으로부터 질산과 금의 추출율을 구하였다. McCabe-Thiele 도로부터 얻어진 조업단수와 상비로 역류추출을 행하여 이론적인 추출단수를 검증하였다. 유기상에 장진된 질산과 금의 연속적인 회수를 위한 탈거실험을 수행하였다. 질산과 금의 추출과 염산의 영향을 고려하여 O/A = 1:0.85의 조건으로 역류추출을 통해 2단에 의해 $103.0mg{\cdot}L^{-1}$의 금은 99.9% 추출되었으며, 3단에 의해 $151.2g{\cdot}L^{-1}$의 질산은 98.0% 추출되었다. 질산과 금의 탈거제로는 증류수와 티오황산나트륨이 사용되었으며 탈거율은 각각 99.5%, 92.0%이었다. 이와 같은 연구결과로 왕수용액에 함유되어 있던 금과 질산을 동시에 추출하고 연속적인 탈거공정에 의해서 질산과 금을 회수하는 것이 가능함을 확인하였다.

• 자원리싸이클링
• /
• 제7권3호
• /
• pp.17-26
• /
• 1998

전기화학적 매개산화 공정에서 발생하는 질산 폐액으로부터 은 및 고농도 질산을 회수하기 위한 연구를 수행하였다. 고농도 질산용액 내에 포함된 은의 회수는 전착법으로 이루어졌으며, 질산농도 3M이하에서는 거의 100%의 전류효율로 98% 이상의 은을 회수할 수 있었다. 또한 질산의 회수를 위한 증발 실험이 수행되었으며, 증발률이 25에서 0.5~1.0mol%의$ NaNO_3$를 함유한 3.5M의 질산 공급폐액으로부터 질산의 절대회수율은 약 80~90%로써 2.8~3.1m의 질산을 얻을 수 있었다. 증발공정에서 회수된 묽은 질산 용액을 고농도 질산용액으로 농축하여 MEO 공정에 재사용하기 위한 처리용량 4kg/hr인 증류탑의 설계 인자 및 운전조건을 Naphtali-Sandholm의 MEH 모델을 사용하여 계산하였다. 단 효율이 70% 이상인 11개의 단으로 구성된 증류탑의 공급단을 6단으로 하고 환류비 0.25, 재비기 열용량 2.7㎾, 응축기 열량 0.5㎾로 운전할 경우 시간당 1.03kg의 12M 질산용액과 2.97kg의 물을 얻을수 있었다.