• Journal of Biosystems Engineering
• /
• v.27 no.6
• /
• pp.537-546
• /
• 2002

In this study an automatic soil hardness measuring system mountable on agricultural tractors was developed to improve the accuracy of manual soil hardness testers by a constant penetrating rate, right direction of the cone-penetrometer and the isolation of vibration from the operator. This was necessary to supply similar experimental condition for performance test of new model and comparative experiment. The results of the study are summaried as follows; 1. The system consisted of a sensing part of soil hardness, a driving part of the measuring system and an attaching part between the tractor and the measuring system. 2. The allowable limit value of the system developed was set to 392N to protect from breaking the serve motor and the coupling used in this system. 3. The driving shaft penetrated into soil by 0.3m to measure soil hardness. The soil hardness was measured at the depth of 0.3m from the soil surface but the penetrating work was stopped and the driving shaft was pulled out to protect the system when the value of the soil hardness was too big on foreign substances like stones or straws. 4. Two values measured by automatic measuring system developed in this research and manual penetrometer were compared by statistics hypothesis testing method. When two people measured the soil hardness at the depth of 0.1 and 0.15m by manual cone penetrometer, there was no relationship between two values by two people but the values at the same depths by automatic measuring system developed showed similarity. The automatic system, therefore, developed in this research was proper for measuring soil hardness.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.255-263
• /
• 2013

Purpose: It is not easy to drive a rice-transplanter avoiding underlapped or overlapped transplanting in paddy fields. An automated guidance system for the riding-type rice-transplanter would be necessary to operate the rice-transplanter autonomously or to assist the beginning drivers as a driving aid. Methods: A prototype of guidance system was composed of embedded computers, RTK-GPS, and a power-steering mechanism. Two Kalman filters were adopted to overcome sparse positioning data (1 Hz) from the RTK-GPS. A global Kalman filter estimated the posture of rice-transplanter every one second, and a local Kalman filter calculated the posture from every new estimation of the global Kalman filter with an interval of 200 ms. A PID controller was applied to the row-following mode control. A control method of U-turning mode was developed as well. A stepping motor with a reduction gear set was used to rotate the shaft of steering wheel. Results: Test trials for U-turning and row-following modes were done in a paddy field after some parameters have been tuned at the ground speed range of 0.3 ~ 1.2 m/s. The minimum RMS error of offset was 3.13 cm at the ground speed of 0.3 m/s while the maximum RMS error was 13.01 cm at 1.2 m/s. The offset RMS error tended to increase as the ground speed increased. The target point distance, LT also affected the system performance and PID controller parameters should be adjusted on different ground speeds. Conclusions: A target angle-based PID controller plus stationary steering angle controller made it possible for the rice-transplanter to steer autonomously by following a reference line accurately and even on U-turning mode. However, as condition in paddy fields is very complicated, the system should control the ground speed that prevents it from deviating too much due to ditch and slope.

• Analytical Science and Technology
• /
• v.30 no.1
• /
• pp.26-31
• /
• 2017

Background and purpose: This study was carried out to learn more about the potential prophylactic or antibacterial activity of the plant Acalypha indica against selective pathogenic bacteria. Experimental: The test organisms were Sarcina lutea IFO 3232, Bacillus subtilis IFO 3026, Pseudomonas denitrificans, Escherichia coli IFO 3007, Klebsiella pneumoniae ATTC 10031, Xanthomonas campestris IAM 1671, and Proteus vulgaris. Leaf, stem, and bud powder of Acalypha indica were dissolved in various solvents, and the extracts were tested for antimicrobial activity through the disc diffusion method. GC-MS profiling was performed to characterize active chemical compounds in the essential oil of Acalypha indica. Results: The ethanol extract showed the highest activity against all bacteria, while the petroleum ether extract yielded the highest zone of inhibition against Proteus vulgaris ($11.83{\pm}1.75mm$). The minimum inhibitory concentration (MIC) of the ethyl acetate extract against Bacillus subtilis was 16 µg/mL. Phytochemical screening by GC-MS revealed a total of 12 bioactive compounds. Conclusion: Extracts of Acalypha indica may be useful in formulating and synthesizing new antibacterial drugs.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.6
• /
• pp.537-543
• /
• 2016

A new approach to systematically model aerodynamic coefficients using an adaptive sampling based wind tunnel testing considering cost is proposed. The Latin Hypercube design is used for selecting initial test points. The Gaussian Process (GP) is iteratively used during the experiment to determine additional experimental points that minimizes the uncertainty reduction per incremental cost. A numerical simulation based experiment was conducted using the static aerodynamic coefficient database a fighter aircraft, which demonstrated the validity of the proposed method.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.1
• /
• pp.1-8
• /
• 2014

BACKGROUND: Recent studies using many amendments for heavy metal stabilization in soil were conducted in order to find out new materials. But, the studies accounting for the use of appropriate amendments considering soil pH remain incomplete. The aim of this study was to investigate the effects of initial soil pH on the efficiency of various amendments. METHODS AND RESULTS: Acid soil and alkali soil contaminated with heavy metals were collected from the agricultural soils affected by the abandoned mine sites nearby. Three different types of amendments were selected with hypothesis being different in stabilization mechanisms; organic matter, lime stone and iron, and added with different combination. For determining the changes in the extractable heavy metals, water soluble, Mehlich-3, Toxicity Characteristic Leaching Procedure, Simple Bioavailability Extraction Test method were applied as chemical assessments for metal stabilization. For biological assessments, soil respiration and root elongation of bok choy (Brassica campestris ssp. Chinensis Jusl.) were determined. CONCLUSION: It was revealed that lime stone reduced heavy metal mobility in acid soil by increasing soil pH and iron was good at stabilizing heavy metals by supplying adsorption sites in alkali soil. Organic matter was a good source in terms of supplying nutrients, but it was concerning when accounting for increasing metal availability.

• Journal of the Korean Society of Food Culture
• /
• v.34 no.6
• /
• pp.719-725
• /
• 2019

This study examined the relative importance and the effective utility of fermented milk by consumers. The questionnaire was developed by an in-depth interview and literature review and was surveyed on-line. Statistical analysis was carried out descriptive analysis, ANOVA, paired t-test, and conjoint analysis using the SPSS package. First, an analysis of the consumption status of fermented milk found that the consumption frequency was 1-2 times/week (36.2%), 3-4 times/week (26.5%). The product choice attributes of fermented milk were found to be the same with 'taste' (3.93) and 'manufacturing date/expired date' (3.92), rated the highest, followed in order by, 'sanitary quality' (3.82), 'origin of ingredient' (3.81). Comparative analysis of the importance and satisfaction level of the choice attributes of fermented milk showed that the choice attributes with lower satisfaction compared to importance were 'taste', 'nutrients', 'manufacturing data/expired date', 'sanitation quality', 'price', 'manufacturing method' and 'certification of quality' (p<0.001, p<0.01). 'Price' and 'certification of quality' were the choice attributes of fermented milk classified as 'Focus Here' because of its high importance and low satisfaction. The preferred combination of relative importance in choice attributes of the fermented milk was 'domestic resource', 'Eat with spoon', and 'none additives'. Therefore, it is believed that sales will increase if dairy companies can improve the 'price' and 'certification of quality'. In addition, the use of domestic ingredients in the development of new fermented milk products in the future could be an important marketing factor in consumer choice.

• The Journal of the Korean Society for Microbiology
• /
• v.18 no.1
• /
• pp.39-46
• /
• 1983

We collected three hundred thirty-five strains of Salmonella typhi isolated from human sources during the period January to December 1982 Korea. Most of them were from general hospitals and city health center, the remaining one hundred sixtyone strains were obtained from other 12 provincial health centers among 335 testing strains. We used ninety-nine Vi-phages as distributed from International Center for Enteric phage Typing(ICEPT) in London. We found nine phage types among 335 strains of Salmonella typhi in this study. Additionally, I+IV, degraded Vi-positive and Vi negative strains were presented. This study documented the occurrence of the new $B_2$ type in Korea for the first time. The present basic phage type formula in Korea appeared to be A, $B_2,\;D_1,\;D_2,\;D_4,\;D_6,\;D_8,\;D_{12},\;E_1,\;E_9,\;D_1,\;M_1$, 40 and plus I+IV and degraded vi strains(Table 2). The current phage types of Salmonella typhi isolated in Korea 1982 were A, $B_2,\;D_1,\;D_2,\;D_6,\;D_8,\;E_1,\;M_1$ and 46 $M_1$ type was widely distributed all over the country, and E type was next predominant. Antibiotic susceptibility test were performed by means of Kirby-Bauer disc diffution method using 12 kind of antibiotics such as Ampicillin, Carbenicillin, Cephalosporin, Chloramphenicol, Colistin, Gentamicin, Kanamycin, Nalidix acid, Neomycin, Polymyxin-B, Streptomycin and Tetracycline. The sensitivity pattern to antibiotics of Salmonelia typhi cultures were summarized.

• Journal of the Korean Society for Heat Treatment
• /
• v.23 no.4
• /
• pp.183-190
• /
• 2010

There are many methods to reduce the weight and the cost of the automobile body, among them, Tailor Welded Blank (TWB) is new welding method applied to body structure. It is necessary to evaluate mechanical properties of TWB structures or sheets for the application to automobile body parts. In this study, the stiffness of T-type and L-type joint structures, composite of TWB panel, which simplified two portions of side structure in automobile body were investigated. Additionally, the fatigue properties of TWB panels were obtained. Two types of welding technologies, laser and mash seam welding, were used to join mild panels with different thickness. This results are compared with conventional structures. The results are as follows: 1) The stiffness of joint structures, composite of TWB panel, is approximately 17% higher than that of conventional ones. 2) The location of welding line in TWB had a effect on the in plane bending stiffness, but not on the out of plane bending stiffness. 3) In terms of welding technology type, the mash seam welding show higher stiffness than the laser welding for in plane bending stiffness. But minimal differences in both types are revealed for out of plane bending stiffness. 4) The fatigue strength, composite of TWB panel, is lower than that of base steel. It is thought that defects in the welding zone had the action of notch in the fatigue test.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.23-23
• /
• 2018

In this study, new titanium alloys were prepared by adding elements such as tantalum (Ta), zirconium (Zr) and the like to complement the biological, chemical and mechanical properties of titanium alloys. The Ti-40Ta-xZr ternary alloy was formed on the basis of Ti-40Ta alloy with the contents of Zr in the contents of 0, 3, 7 and 15 wt. %. Plasma electrolytic oxidation (PEO), which combines high-voltage sparks and electrochemical oxidation, is a novel method to form ceramic coatings on light metals such as Ti and its alloys. These oxide film produced by the electrochemical surface treatment is a thick and uniform porous form. It is also composed of hydroxyapatite and calcium phosphate-based phases, so it has the characteristics of bone inorganic, non-toxic and very high bioactivity and biocompatibility. Ti-40Ta-xZr alloys were homogenized in an Ar atmosphere at $1050^{\circ}C$ for 1 hour and then quenched in ice water. The electrochemical oxide film was applied by using a power supply of 280 V for 3 minutes in 0.15 M calcium acetate monohydrate ($Ca(CH_3COO)_2{\cdot}H_2O$) and 0.02 M calcium glycerophosphate ($C_3H_7CaO_6P$) electrolyte. A small amount of 0.0075M zinc acetate and magnesium acetate were added to the electrolyte to enhance the bioactivity. The mechanical properties of the coated surface of Ti-40Ta-xZr alloys were evaluated by Vickers hardness, roughness test, and elastic modulus using nano-indentation, and the surface wettability was evaluated by measuring the contact angle of the coated surface. In addition, cell activation and differentiation were examined by cell culture of HEK 293 (Human embryonic kidney 293) cell proliferation. Surface properties of the alloys were analyzed by scanning electron microscopy(FE-SEM), EDS, and X-ray diffraction analysis (XRD).

• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.352-358
• /
• 2012

Purpose: The inexpensive black box system was developed to acquire and save driving information, to give the slope information, and to transmit SOS and theft signal. Method: The device consists of a main micro controller to acquire and save data, a GPS sensor module, a CDMA module, a touch LCD module, a RF (Radio Frequency) ID module, a SD (Secure Digital) card module, an emergency electric power source, a theftproof circuit, and a sensing device. The sensing device consists of a 8 bit micro controller, a accelerometer to detect impulse, two slope sensors to detect roll and pitch angle and a circuit to detect operation of 6 lighting devices. Results: Test results are as follows: 1) a tractor can be start up only with an electronic key (password or RFID card), 2) theft signal was transmitted when a tractor moved without an electronic key, 3) SOS was transmitted at conditions that rollover or crash happened. 4) 5 more than per 1s data are recorded at 5 minute intervals as new file name in SD card. Conclusions: This system can be used to save travelling record, reduce accident, prevent theft and rescue life in the accidents.