• IE interfaces
• /
• v.18 no.4
• /
• pp.485-493
• /
• 2005

In this study, a method that can objectively and systematically design the layout of user interface components was developed. In order to explain its application method, the method was applied to the layout design of facsimile. In particular, in order to validate the suitability of the method, comparison tests were performed for the case of facsimile. Computer simulators for layout design were made using Micromedia Flash and comparison evaluation for an existing layout and a new layout was performed in three aspects. The first comparison method was to measure and compare its movement distance when carrying out a task in two layout models. The second one was to measure and compare users' performance. The last one was to measure and compare users' subjective satisfaction after using two models. As the result, new layout design was better than the existing design in all comparison tests. The movement distance of the new layout design model was shorter than the existing model. And, its performance including task completion time and error frequency was better and users' satisfaction was higher than the existing. In conclusion, the method that was developed in this study can be very effectively used in the layout design of user interface components.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.1
• /
• pp.53-64
• /
• 2004

The CRT(cathode ray tube) in oscilloscope consists of an electron gun, horizontal vertical deflection system and a phosphor screen. When the electron beam strikes the phosphor screen, the phosphor generates light. The phosphor screen has formed by CRT precipitation method. But, this method has some defects that are complex process, low yield, much consumption of raw-material, dirty working environment, waste problem, require of high cost. Moreover phosphor for oscilloscope used at present has been imported from Japan. Therefore developments of new phosphor and new method(the screen printing) top form phosphor screen for oscilloscope are required to improve these matters. This study was developed novel method(the screen printing) to form the phosphor screen for oscilloscope used new phosphor. This screen printing method has advantages of simple process, high yield, clean working environment, saving raw material and running-cost.

• Structural Engineering and Mechanics
• /
• v.43 no.3
• /
• pp.321-336
• /
• 2012

As an improvement on the isoparametric element method, the derivation presented in this paper is close to that done by Wang (1990) for the 2-D finite element. We extend this idea to solve 3-D crack problems in this paper. A new displacement modelling is constructed with local solutions of three-dimensional cracks and a quasi-compatible isoparametric element for three-dimensional fracture mechanics analysis is presented. The stress intensity factors can be solved directly by means of the present method without any post-processing. A new method for calculating the stress intensity factors of three-dimensional cracks with complex geometries and loads is obtained. Numerical examples are given to demonstrate the validity of the present method. The accuracy of the results obtained by the proposed element is demonstrated by solving several crack problems. The results illustrate that this method not only saves much calculating time but also increases the accuracy of solutions. Because this quasi-compatible finite element of 3-D cracks contains any singularities and easily meets the requirement of compatibility, it can be easily implemented and incorporated into existing finite element codes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.113-118
• /
• 2005

Robots today have wider application fields than they ever have before. They need to work close to humans and fluid and compliable motions are expected of them. This requires redundant degrees of freedom for completing specific task. And conventional motion teaching method cannot be applied to redundant link structures. In this paper, the authors present a proficient, cost-effective and intuitive method for motion teaching. New software to apply this method to a humanoid is also presented. This new method utilizes current sensors to determine which joints to rotate. The experiment shown in this paper is a case of closed link where arms cannot move independently due to the restrictions in between the hands. After the input of several passing points of motion trajectory, the curve fitting is performed by the developed software. This software can insert new points, delete erroneous points and modify existing points. The developed motion teaching method is applied to the Kumdo robot, which is developed by the authors.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.438-444
• /
• 2003

A new method to measure residual stress in micron and nano scale films is described. In the theory it is based on Linear Elastic Fracture Mechanics. And in the techniques it depends on the combined capability of the focused ion beam (FIB) imaging system and of high-resolution digital image correlation (DIC) software. The method can be used for any film material (whether amorphous or crystalline) without thinning the substrate. In the method, a region of the film surface is highlighted and scanning electron images of that region taken before and after a long slot, depth a, is introduced using the FIB. The DIC software evaluates the displacement of the surface normal to the slot due to the stress relaxation by using features on the film surface. To minimize the influence of signal noise and rigid body movement, not a few, but all of the measure displacements are used for determining the real residual stress. The accuracy of the method has been assessed by performing measurements on a nano film of diamond like carbon (DLC) on glass substrate and on micro film of aluminum oxide thermally grown on Fecrally substrate. It is shown that the new method determines the residual stress ${\sigma}_R=-1.73$ GPa for DLC and ${\sigma}_R=-5.45$ GPa for the aluminum oxide, which agree quite well with ones measured independently.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2C
• /
• pp.172-180
• /
• 2003

This paper propose a new change detection algorithm based on macro block unit for selective video coding scheme. The conventional method badly decides a macro block of unchanged region into a changed macro block due to a noise of the difference images. To solve the problem of the conventional method, we propose a new test statistic which is robust to the noise of the difference image. As shown in experimental results(Fig. 1∼3), the proposed algorithm shows more accurate segmentation results than the conventional method. Also, because the proposed detection method reduces the average numbers of changed macro block per frame to 55∼60% than the conventional method, it can improve the performance of the selective video coding at lower bit rates.

• Archives of Pharmacal Research
• /
• v.23 no.4
• /
• pp.381-384
• /
• 2000

It is well recognized that physicochemical properties of drugs are affected by the type of polymorphic crystalline form of drugs. Clarithromycin is known to exist in at least three polymorphic crystalline forms. Since conventional means to obtain the most thermodynamically stable form (Form II) for the antibiotics is known to be associated with a low purity of the stable form, we developed a novel method to improve the purity of the crystalline form by a modification of the preparation process. The new method involved a simple recrystallization of clarithromycin in solvents having 5-12 carbon atoms (e.g., hexane and heptane) or ethers with 4-10 carbon atoms (e.g., isopropyl ether) and, thus, less likely to be associated with the problem in purity of resulting crystal. Differential scanning calorimetry and powder X-ray diffraction were used to compare the crystalline form of the resultant powder with Form IIcrystal prepared by the conventional method. The crystal prepared by the new method was identical to Form IIcrystal of the conventional method as evidenced by the lack of the exothermic peak near 11$0^{\circ}C$ in differential calorimetry scan, indicating that Form IIcrystal could be readily prepared by the new process. Therefore, these data indicated that the improvement in the purity of the Form IIcrystal for clarithromycin as well as a significant cost reduction is likely by the novel method.

• Journal of the Korean Chemical Society
• /
• v.30 no.6
• /
• pp.500-509
• /
• 1986

For the development of new type cell, a study on new electrolyte, $AgI-Ag_8S_3SO_4$ system has been carried out by using electrical conductivity measurement, DTA and X-ray powder diffraction method. From both X-ray powder diffraction and DTA method, it is clearly known that 20mole% $ Ag_8S_3SO_4$-AgI system forms single phase, having monoclinic structure. It is also found that 20mole% $Ag_8S_3SO_4$-AgI system is purely $ Ag^+ $cation conduction from results of conductivity measurement by applying 4-probe method.

• Ocean Systems Engineering
• /
• v.7 no.4
• /
• pp.399-412
• /
• 2017

The Gauss-Legendre integral method is applied to numerically evaluate the Green function and its derivatives in finite water depth. In this method, the singular point of the function in the traditional integral equation can be avoided. Moreover, based on the improved Gauss-Laguerre integral method proposed in the previous research, a new methodology is developed through the Gauss-Legendre integral. Using this new methodology, the Green function with the field and source points near the water surface can be obtained, which is less mentioned in the previous research. The accuracy and efficiency of this new method is investigated. The numerical results using a Gauss-Legendre integral method show good agreements with other numerical results of direct calculations and series form in the far field. Furthermore, the cases with the field and source points near the water surface are also considered. Considering the computational efficiency, the method using the Gauss-Legendre integral proposed in this paper could obtain the accurate numerical results of the Green function and its derivatives in finite water depth and can be adopted in the near field.

• Journal of Information Processing Systems
• /
• v.16 no.1
• /
• pp.120-131
• /
• 2020

In order to solve the problem of point clouds coordinate conversion of non-directional scanners, this paper proposes a basic Rodrigues rotation method. Specifically, we convert the 6 degree-of-freedom (6-DOF) rotation and translation matrix into the uniaxial rotation matrix, and establish the equation of objective vector conversion based on the basic Rodrigues rotation scheme. We demonstrate the applicability of the new method by using a bar-shaped emboss point clouds as experimental input, the three-axis error and three-term error as validate indicators. The results suggest that the new method does not need linearization and is suitable for optional rotation angle. Meanwhile, the new method achieves the seamless splicing of point clouds. Furthermore, the coordinate conversion scheme proposed in this paper performs superiority by comparing with the iterative closest point (ICP) conversion method. Therefore, the basic Rodrigues rotation method is not only regarded as a suitable tool to achieve the conversion of point clouds, but also provides certain reference and guidance for similar projects.