• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.841-846
• /
• 2011

New green host materials, 9-phenyl-3-(4-(1-phenyl-1H-benzo[d] imidazol-2-yl)phenyl)-9H-carbazole (3a) and 9-(naphthyl-2-yl)-3-(4-(1-phenyl-1H-benzo[d]imidazol-2-yl)phenyl)-9H-carbazole (3b), have been designed and synthesized by attaching the electron transporting benzimidazole moiety to the hole transporting carbazole unit. These compounds have similar HOMO, LUMO levels and band-gap characteristics compared with CBP (4,4'-di(N-carbazolyl)biphenyl). The fabricated green phosphorescent OLED with this 3a host shows much better device performances compared to CBP-based one. The current and power efficiency is enhanced at least by 60 percent at a given constant luminance of 1000 cd/$m^2$.

• Genomics & Informatics
• /
• v.14 no.4
• /
• pp.216-221
• /
• 2016

Osteoporotic fractures (OFs) are critical hard outcomes of osteoporosis and are characterized by decreased bone strength induced by low bone density and microarchitectural deterioration in bone tissue. Most OFs cause acute pain, hospitalization, immobilization, and slow recovery in patients and are associated with increased mortality. A variety of genetic studies have suggested associations of genetic variants with the risk of OF. Genome-wide association studies have reported various single-nucleotide polymorphisms and copy number variations (CNVs) in European and Asian populations. To identify CNV regions associated with OF risk, we conducted a genome-wide CNV study in a Korean population. We performed logistic regression analyses in 1,537 Korean subjects (299 OF cases and 1,238 healthy controls) and identified a total of 8 CNV regions significantly associated with OF (p < 0.05). Then, one CNV region located on chromosome 20q13.12 was selected for experimental validation. The selected CNV region was experimentally validated by quantitative polymerase chain reaction. The CNV region of chromosome 20q13.12 is positioned upstream of a family of long non-coding RNAs, LINC01260. Our findings could provide new information on the genetic factors associated with the risk of OF.

• Health Policy and Management
• /
• v.34 no.1
• /
• pp.4-16
• /
• 2024

Smart hospitals involve the use of recent ICT (information and communications technology) technologies to improve healthcare access, efficiency, and effectiveness. Standardization in smart hospital technologies is crucial for interoperability, scalability, policy formulation, quality control, and maintenance. This study reviewed relevant international standards for smart hospitals and the organizations that develop them. Specific attention was paid to robotics in smart hospitals and the potential for standardization in this area. The study used online resources and existing standards to analyze technologies, standards, and practices in smart hospitals. Key technologies of smart hospitals were identified. Relevant standards from ISO (International Organization for Standardization) and IEC (International Electrotechnical Commission) were mapped to each core technology. Korea's leadership in smart hospital technology were highlighted. Approaches for standardizing smart hospitals were proposed. Finally, potential new international standard items for robotics in smart hospitals were identified and categorized by function: sampling, remote operation, delivery, disinfection, and movement tracking/contact tracing. Standardization in smart hospital technologies is crucial for ensuring interoperability, scalability, ethical use of artificial intelligence, and quality control. Implementing international standards in smart hospitals is expected to benefit individuals, healthcare institutions, nations, and industry by improving healthcare access, quality, and competitiveness.

• Genomics & Informatics
• /
• v.9 no.3
• /
• pp.121-126
• /
• 2011

Osteoarthritis (OA) is the most common degenerative joint disorder in the elderly population. To identify OA-associated genetic variants and candidate genes, we conducted a genome-wide association study (GWAS). A total 3,793 samples (476 cases: wrist + knee and 3317 controls) from a community-based epidemiological study were genotyped using the Affymetrix SNP 5.0. An intronic SNP (rs4789934) in the TIMP2 (tissue inhibitor of metalloproteinase-2) showed the most significance with OA (odd ratio [OR] = 2.06, 95% confidence interval [CI] = 1.52-2.81, p = $4.01{\times}10^{-6}$). Furthermore, a poly-morphism (rs1352677) in the NKAIN2 ($Na^+/K^+$ transporting ATPase interacting 2) was suggestively associated with OA (OR = 1.43, CI = 1.22-1.66, p = $7.01{\times}10^{-6}$). The present study provides new insights into the identification of genetic predisposing factors for OA.

• Smart Structures and Systems
• /
• v.5 no.4
• /
• pp.369-379
• /
• 2009

The sudden collapse of Interstate 35 Bridge in Minneapolis gave a wake-up call to US municipalities to re-evaluate aging bridges. In this situation, structural health monitoring (SHM) technology can provide the essential help needed for monitoring and maintaining the nation's infrastructure. Monitoring long span bridges such as cable-stayed bridges effectively requires the use of a large number of sensors. In this article, we introduce a probabilistic approach to identify optimal locations of sensors to enhance damage detection. Probability distribution functions are established using an artificial neural network trained using a priori knowledge of damage locations. The optimal number of sensors is identified using multi-objective optimization that simultaneously considers information entropy and sensor cost-objective functions. Luling Bridge, a cable-stayed bridge over the Mississippi River, is selected as a case study to demonstrate the efficiency of the proposed approach.

• Journal of Technologic Dentistry
• /
• v.10 no.1
• /
• pp.47-54
• /
• 1988

The purpose of this study is to evaluate the castability of Ni-Cr alloys for crown and bridge. New young, Hi-Crown and CB-80 which are widely used in dental laboratory were chosen, casting and increased the temperature of furnace 100$^{\circ}C$ of each 7 grades from 600$^{\circ}C$ to 1200$^{\circ}C$. The results are as follows : 1. CB-80 is the most prominent castability among the three Ni-Cr alloys which are Hi-Crown, New-young and Hi-Cr. 2. The good burning temperatures of casting for CB-8p are 900$^{\circ}C$, 100$^{\circ}C$ and 1100$^{\circ}C$ which are obtained four complate casting body of five former patterns. 3. The most proper burning temperature for three Ni-Cr alloys is 900$^{\circ}C$.

• Journal of Technologic Dentistry
• /
• v.13 no.1
• /
• pp.9-13
• /
• 1991

The purpose of this study was to determine the marginal fit of recasting by used nickel-chromium metal alloys, Hi-Crown, New-Crown and CB-80. Ninety crown prosthetics were divided into eighteen groups according to new to old metal ratios. Each crown was seated on its master die and then the marginal gaps were measured under optical microscope($\times$50). All groups were showed good marginal fit, except group 3 of Hi-Crown(156$\mu$m). The results suggest that the marginal fit of Ni-Cr metal alloy casting bodies were good as without concerned to mixed ratios and metals.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.411-416
• /
• 2002

The emergence of viral diseases transmitted is nowadays a central problem in the world. Problem, which is becoming very critical in developing countries, where the health systems are not yet enough developed to face the bursting of such diseases. Emerging viral diseases constitute one of the major threats to human being that are arising in the modern world. Besides bio-chemical and medical researches, new orientations are developed to understand the environmental dimensions of such emergence. Questions concerning the inter-plays between the environmental and disease dynamics are building up new investigations, both in remote sensing and GIS, for the elaboration of levels of organization of space and environment in relation to incidences, to gain understandings in these issues. Environmental attributes attached to land cover types: area, spatial heterogeneity and physical state, are derived from remote sensing and applied to uncover related dimensions of the Dengue disease.

• Journal of Technologic Dentistry
• /
• v.26 no.1
• /
• pp.49-58
• /
• 2004

Two diketones, 1-phenyl-1,2-propanedione(PD) and 2,3-butanedione (BD) were investigated as new visible light photosensitizers for a dental resin composite of bis-GMA in order to improve photopolymerization effect. And the photopolymerization efficiency of mixed photosensitizers, PD-CQ and DA-CQ, was studied. Photopolymerization effect of photosensitizers were compared with that of camphorquinone(CQ), the most widely used photosensitizer. The photopolymerization efficiency of bis-GMA containing the photosensitizer increased with irradiation time. The increase was in the order: BD < CQ < PD. The photopolymerization efficiency of this mixture was not so efficient as CQ or PD.

• Journal of Environmental Health Sciences
• /
• v.47 no.1
• /
• pp.20-35
• /
• 2021

Objectives: Waste treatment by incineration is gradually increasing as the emission of harmful substances has decreased owing to developments in incineration technology. However, residents living near incinerators continue to express anxiety regarding the effects on their health. Therefore, we attempted to summarize the health impact of incinerators by comprehensively reviewing the recently reported literature. Methods: Sixty-two epidemiological research papers related to incineration and health effects were selected from the Google Scholar database and analyzed (from between January 2001 and December 2019). Results: When compared to older incinerators, newer incinerators established after 2000 are considered relatively safe in terms of health effects. Nevertheless, there have been some studies that have linked them to various diseases, such as malignant tumors including soft tissue cancer and non-Hodgkin's lymphoma, reproductive disorders, respiratory diseases, and more. In addition, incinerator workers and local residents are considered to be exposed to dioxins and some heavy metals from the incinerator. Since most studies included subjects exposed to older incinerators, it is difficult to apply these results to the health impact assessment of new incinerators. However, it is not appropriate to conclude that new incinerators made with state-of-the-art technology are safe, as chronic environmental diseases caused by hazardous substances tend to appear only after prolonged exposure. Conclusions: In terms of environmental health, it is necessary to continuously monitor the health effects of incinerators. Also, there is a need to develop a research methodology that can minimize various confounders in incineration-related epidemiological study.