• Title/Summary/Keyword: neutral heating

검색결과 98건 처리시간 0.03초

탄소중립을 위한 주거단지에서의 에너지 전환 동향 (Energy Transition Trend in Residential Complexes for Carbon Neutrality)

  • 이태구;한영해
    • 한국농촌건축학회논문집
    • /
    • 제26권2호
    • /
    • pp.1-8
    • /
    • 2024
  • Carbon neutrality refers to a state in which there is no global increase in CO2 emissions due to human activities. In Korea, for carbon neutrality, green remodeling of existing buildings and customized support tasks for zero energy in new buildings are presented. Germany is showing fundamental changes in energy supply, such as applying renewable energy and higher energy efficiency from nuclear and fossil fuels, which were the existing energy sources. In this study, how Germany establishes policies for carbon neutrality at each state level and the cases applied to increase the energy efficiency of the actually applied residential complexes are analyzed based on this. As a result of the case complex analysis, it was found that the construction direction was being promoted as a zero-energy complex or a carbon-neutral complex by gradually reducing the energy demand in buildings and supplying additional energy with new and renewable energy in the low-energy building distribution in the 1990s. In Germany's ecological complex, energy standards have been strengthened from low-energy architecture to plus-energy architecture over time, and annual heating energy consumption standards and heat transmittance rates for each structure have been achieved at a higher level. The results of this analysis will serve as basic data and derivation of applicable items when planning residential complex development and remodeling of existing buildings for the domestic carbon-neutral goal in the future.

RF pulsing이 Ionized Magnetron Sputtering의 이온화율 향상에 미치는 효과 (Effects of RF Pulsing on the Ionization Enhancement in Ionized Magnetron Sputtering)

    • 한국진공학회지
    • /
    • 제7권3호
    • /
    • pp.255-260
    • /
    • 1998
  • Ionized magnetron sputtering은 high density plasma를 사용하여 스퍼터된 입자의 이온화율을 기판에서의 플럭스 기준으로 80%이상까지 증대시킬 수 있는 방법으로 반도체 소자의 아주 작은 홀이나 via contact등을 채울 수 있는 아주 유용한 수단이나 가스의 압력 이 30mTorr 이상으로 상당히 높아야만 이온화율이 높게 유지되어 스퍼터 증착 속도가 느려 지고 중성입자의 각도 분포가 넓어지는 단점이 있다. 그 원인이 스퍼터된 입자들에 의한 전 자 온도의 급격한 감소와 타겟 주변에서의 가스 희귀화 현상에 있다고 보고 이를 보완하고 자 스퍼터 전력을 펄스화 하는 방법을 고안하여 실험하였다. 그 결과 펄스의 on/off time이 10ms/10ms, 100ms/100ms에서 가장 높은 이온화율을 가시광 분광 결과에서 보였으며 실제 로 Ag의 XRD결과 (111)에서 (200)으로 우선 방위의 현격한 변화가 관찰되었다. 이를 고전 력 스퍼터링에 의한 중성 가스 가열과 냉각의 측면에서 해석하였다.

  • PDF

FAR-INFRARED [C II] EMISSION FROM THE CENTRAL REGIONS OF SPIRAL GALAXIES

  • MOCHIZUKI KENJI
    • 천문학회지
    • /
    • 제37권4호
    • /
    • pp.193-197
    • /
    • 2004
  • Anomalies in the far-infrared [C II] 158 ${\mu}m$ line emission observed in the central one-kiloparsec regions of spiral galaxies are reviewed. Low far-infrared intensity ratios of the [C II] line to the continuum were observed in the center of the Milky Way, because the heating ratio of the gas to the dust is reduced by the soft interstellar radiation field due to late-type stars in the Galactic bulge. In contrast, such low line-to-continuum ratios were not obtained in the center of the nearby spiral M31, in spite of its bright bulge. A comparison with numerical simulations showed that a typical column density of the neutral interstellar medium between illuminating sources at $hv {\~} 1 eV $ is $N_H {\le}10^{21}\;cm^{-2}$ in the region; the medium is translucent for photons sufficiently energetic to heat the grains but not sufficiently energetic to heat the gas. This interpretation is consistent with the combination of the extremely high [C Il]/CO J = 1-0 line intensity ratios and the low recent star-forming activity in the region; the neutral interstellar medium is not sufficiently opaque to protect the species even against the moderately intense incident UV radiation. The above results were unexpected from classical views of the [C II] emission, which was generally considered to trace intense interstellar UV radiation enhanced by active star formation.

Novel deposition technology for nano-crystalline silicon thin film at low temperature by hyper-thermal neutral beam assisted CVD system

  • Jang, Jin-Nyoung;Song, Byoung-Chul;Oh, Kyoung-Suk;Yoo, Suk-Jae;Lee, Bon-Ju;Choi, Soung-Woong;Park, Young-Chun;Hong, Mun-Pyo
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.1025-1027
    • /
    • 2009
  • Novel low temperature deposition process for nano-crystalline Si thin film is developed with the hyper-thermal neutral beam (HNB) technology. By our HNB assisted CVD system, the reactive particles can induce crystalline phase in Si thin films and effectively combine with heating effect on substrate. At low deposition temperature under $80^{\circ}C$, the HNB with proper incident energy controlled by the reflector bias can effectively enhance the nano-crystalline formation in Si thin film without any additional process. The electrical properties of Si thin films can be varied from a-Si to nc-Si according to change of HNB energy and substrate temperature. Characterization of these thin films with conductivity reveal that crystalline of Si thin film can increase by assist of HNB with appropriate energy during low temperature deposition. And low temperature prcoessed nc-Si TFT performance has on-off ratio as order 5.

  • PDF

식용유(食用油)(해바라기)의 저장후건(貯藏候件)에 따른 지질성분(脂質成分)의 변화(變化) (Changes in the Lipid Components of Edible Oil (Sunflower Seed Oil) under Storage Conditions)

  • 황주호;윤형식
    • 한국식품영양과학회지
    • /
    • 제10권1호
    • /
    • pp.17-25
    • /
    • 1981
  • 국내산(國內産) 해바라기 종자유(種子油)를 사용(使用)하여 가열산화(加熱酸化)에 의(依)한 변화(變化)를 검토(檢討)하기 위하여 지방산조성(脂肪酸組成) 및 중성지질성분(中性脂質成分)의 변화(變化)와 특성(特性)을 측정(測定)한 결과(結果)는 다음과 같다. 종자유(種子油) 중에는 중성지질(中性脂質), 당지질(糖脂質) 및 인지질(燐脂質)의 함량(含量)은 각각(各各) 94.1%, 3.2% 및 2.7%였다. 지방산조성(脂肪酸組成)은 채유직후(採油直後) oleic acid가 59.84%로 가장 많고 linoleic acid는 29.48%로 그 다음으로 많으며 palmitic 및 stearic acid가 각각(各各) 6.21% 및 4.50%였다. 이는 외국(外國)에서 생산(生産)되는 종자유(種子油)와 비교(比較)하면 linoleic acid가 $20{\sim}30%$ 낮은 반면(反面)에 oleic acid는 $20{\sim}30%$정도 높았다. 처리후(處理後) linoleic acid 함량(含量)은 $100^{\circ}C$, $180^{\circ}C$에서 각각(各各) 1.48%, 5.32% 감소(減少)되었으나, oleic, palmitic 및 stearic acid는 상대적(相對的)으로 증가(增加)하였다. 또한 중성지질(中性脂質) 성분(成分)은 triglyceride, diglyceride 및 free fatty acid등(等)의 함량순(含量順)으로 6개(個)의 성분(成分)을 확인 하였고 처리후(處理後)에 있어서는 triglyceride는 감소(減少)한 반면(反面)에 diglyceride 및 monoglyceride는 증차증가(漸次增加)하였다. 또한 free fatty acid는 $100^{\circ}C$에서 점차(漸次) 증가(增加)하였으나 $180^{\circ}C$ 16시간(時間) 이후(以後)에는 약간의 감소(減少)를 보였다. 옥도가(沃度價)는 처리후(處理後) 감소(減少)하였으며, 과산화물가(過酸化物價)는 $100^{\circ}C$에서 점차(漸次) 계속 증가(增加)하였으나. $180^{\circ}C$에서는 16시간(時間) 까지는 증가(增加)하였으나 그이후(以後) 감소현상(減少現象)을 나타내었다.

  • PDF

Sources of the High-Latitude Thermospheric Neutral Mass Density Variations

  • Kwak, Young-Sil;Richmond, Arthur;Deng, Yue;Ahn, Byung-Ho;Cho, Kyung-Suk
    • Journal of Astronomy and Space Sciences
    • /
    • 제27권4호
    • /
    • pp.329-335
    • /
    • 2010
  • We investigate the sources of the variation of the high-latitude thermospheric neutral mass density depending on the interplanetary magnetic field (IMF) conditions. For this purpose, we have carried out the National Center for Atmospheric Research Thermosphere-Ionosphere Electrodynamics General Circulation Model (NCAR-TIEGCM) simulations for various IMF conditions under summer condition in the southern hemisphere. The NCAR-TIEGCM is combined with a new empirical model that provides a forcing to the thermosphere in high latitudes. The difference of the high-latitude thermospheric neutral mass density (subtraction of the values for zero IMF condition from the values for non-zero IMF conditions) shows a dependence on the IMF condition: For negative $B_y$ condition, there are significantly enhanced difference densities in the dusk sector and around midnight. Under the positive-$B_y$ condition, there is a decrease in the early morning hours including the dawn side poleward of $-70^{\circ}$. For negative $B_z$, the difference of the thermospheric densities shows a strong enhancement in the cusp region and around midnight, but decreases in the dawn sector. In the dusk sector, those values are relatively larger than those in the dawn sector. The density difference under positive-$B_z$ condition shows decreases generally. The density difference is more significant under negative-$B_z$ condition than under positive-$B_z$ condition. The dependence of the density difference on the IMF conditions in high latitudes, especially, in the dawn and dusk sectors can be explained by the effect of thermospheric winds that are associated with the ionospheric convection and vary following the direction of the IMF. In auroral and cusp regions, heating of thermosphere by ionospheric currents and/or auroral particle precipitation can be also the source of the dependence of the density difference on the IMF conditions.

Development and Testing of a Prototype Long Pulse Ion Source for the KSTAR Neutral Beam System

  • Chang Doo-Hee;Oh Byung-Hoon;Seo Chang-Seog
    • Nuclear Engineering and Technology
    • /
    • 제36권4호
    • /
    • pp.357-363
    • /
    • 2004
  • A prototype long pulse ion source was developed, and the beam extraction experiments of the ion source were carried out at the Neutral Beam Test Stand (NBTS) of the Korea Superconducting Tokamak Advanced Research (KSTAR). The ion source consists of a magnetic bucket plasma generator, with multi-pole cusp fields, and a set of tetrode accelerators with circular apertures. Design requirements for the ion source were a 120kV/65A deuterium beam and a 300 s pulse length. Arc discharges of the plasma generator were controlled by using the emission-limited mode, in turn controlled by the applied heating voltage of the cathode filaments. Stable and efficient arc plasmas with a maximum arc power of 100 kW were produced using the constant power mode operation of an arc power supply. A maximum ion density of $8.3{\times}10^{11}\;cm^{-3}$ was obtained by using electrostatic probes, and an optimum arc efficiency of 0.46 A/kW was estimated. The accelerating and decelerating voltages were applied repeatedly, using the re-triggering mode operation of the high voltage switches during a beam pulse, when beam disruptions occurred. The decelerating voltage was always applied prior to the accelerating voltage, to suppress effectively the back-streaming electrons produced at the time of an initial beam formation, by the pre-programmed fast-switch control system. A maximum beam power of 0.9 MW (i.e. $70\;kV{\times}12.5\;A$) with hydrogen was measured for a pulse duration of 0.8 s. Optimum beam perveance, deduced from the ratio of the gradient grid current to the total beam current, was $0.7\;{\mu}perv$. Stable beams for a long pulse duration of $5{\sim}10\;s$ were tested at low accelerating voltages.

Effect of pH on the Enolization of Sugars and Antioxidant Activity of Caramelization Products Obtained by Caramelization Browning

  • Kim, Ji-Sang;Lee, Young-Soon
    • Food Science and Biotechnology
    • /
    • 제17권5호
    • /
    • pp.931-939
    • /
    • 2008
  • The objective of this study was to investigate the enolization reaction and the antioxidant activity of caramelization products (CPs) obtained by caramelization browning of glucose and fructose solutions prepared at a pH ranging from 7.0 to 12.0 at varying temperatures ($80-180^{\circ}C$). The degradation of sugars rapidly increased at a high alkaline pH (10.0-12.0), and fructose degraded more rapidly than glucose (p<0.05). As the pH increased, the degree of sugar enolization was higher in fructose than in glucose. Browning and the formation of intermediate degradation products increased with the increase in heating temperatures. The browning development was dependent upon the type of sugar, and it was generally higher at alkaline pH than at neutral pH. The reducing power and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity of the CPs increased with the increase in browning and formation of large amounts of intermediates. Therefore, the CPs with pronounced antioxidant activity can be prepared by heating fructose or glucose solutions that have a very alkaline pH to high temperatures.

디젤 분사 특성이 Biogas-디젤 혼소엔진 성능에 미치는 영향 (Effect of Diesel Injection Characteristics on Biogas-Diesel Dual Fuel Engine Performance)

  • 이선엽;김영민;이장희
    • 한국분무공학회지
    • /
    • 제15권4호
    • /
    • pp.195-201
    • /
    • 2010
  • Due to its carbon-neutral nature, biogas generated from anaerobic digestion or fermentation of biodegradable wastes is one of the important renewable energy sources to reduce global warming. It is mainly composed of methane and various inert gases such as $CO_2$ and $N_2$, and the actual composition of biogas significantly varies depending on the origin of anaerobic digestion process. Therefore, in order to effectively utilize this fuel as an energy source for electricity, it is important to develop power generation engines which can successfully apply biogas with significant composition variations. In this study, efforts have been made to develop a diesel-biogas duel fuel engine as a way to achieve such a stable power generation. The effects of diesel fuel injection quantity and pressure on stable combustion and engine performance were investigated, and an impact of diesel fuel atomization was discussed. The engine test results show that there exists a 2 stage combustion which consists of diesel pilot fuel burning and premixed biogas/air mixture burning in dual fuel engine operation and optimum diesel injection parameters were suggested for biogases with various compositions and heating values.

안전성을 고려한 고효율 목재펠릿 보일러 개발 (Development of a High Efficiency Wood Pellet Boiler with Improved Safety)

  • 정찬홍;박민철
    • 한국신뢰성학회지:신뢰성응용연구
    • /
    • 제12권1호
    • /
    • pp.35-46
    • /
    • 2012
  • Wood pellet is one of biomass energy fuels, which is produced by compressing woody biomass such as sawdust, planer shavings, and whole-tree removal or tree tops and branches leftover after logging into cylindrical form. Latterly much attention has been paid to wood pellet boiler which is suitable for use at various scales in domestic and industrial furnaces for heat production to replace conventional fossil fuel energy sources since the use of wood pellet that is carbon neutral can alleviate global warming. This study presents the result of developing a high efficiency wood pellet boiler with 55MJ/h capacity. Efficiency has been improved by using a rotating disk burner with a shorter screw feeder. Special attention has been paid to the improvement of the safety of the wood pellet boiler from backfire by adopting a double protecting system composed of a shutter and an air curtain. The result shows that the efficiencies of the wood pellet boiler are 97.2% and 89.2% based on lower and higher heating values, respectively, at 15.1kW of heating output.