• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.2 no.1
• /
• pp.33-37
• /
• 2002

Insulation aging diagnosis system provides early warning regarding electrical equipment defects. Early warning is very important in that it can avoid great losses resulting from unexpected shutdown of the production line. Since relations of insulation aging and partial discharge dynamics are non-linear. it is very difficult to provide early warning in an electrical equipment. In this paper, we propose the design method of insulation aging diagnosis system that use a electromagnetic wave and acoustic signal to diagnose an electrical equipment. Proposed system measures the partial discharge on-line from DAS(Data Acquisition System and acquires 2D patterns from analyzing it. For filtering the noise contained in sensor signals we used ICA algorithms. Using this data, we design of the neuro-fuzzy model that diagnoses an electrical equipment and is investigated in this paper. Validity of the new method is asserted by numerical simulation.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.818-821
• /
• 2002

In this paper, we propose Neuro-Fuzzy discrimination method of the new and old bill using bill money acoustic data. The concept of the histogram is introduced to improve the processing time into the proposal system. The adaptative filter is used in order to remove the motor sound from an observed bill money acoustic data. The output signal of this adaptive digital filter is converted into not only a spectrum but also a histogram. It became easy that features of the paper money sound were extracted from the bill money acoustic data. The spectral data and the histogram is obtained like this, and it become an input pattern of the neural network(NN). Then, the discrimination result of the NN is finally judged by the fuzzy inferece in the new bill or the exhaustion bill.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.261-264
• /
• 1992

This paper proposes a neuro-fuzzy adaptive controller which includes the procedure of initializing the identification neural network(INN) and that of learning the control neural network(CNN). The identification neural network is initialized with the informations of the plant which are obtained by a fuzzy controller and the control neural network is trained by the weight informations of the identification neural network during on-line operation.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.4
• /
• pp.438-445
• /
• 2008

For recipe prediction of colorant proportion showing nonlinear behavior, we modeled the effects of colorant proportion of basic colors on the target colors and predicted colorant proportion necessary for making target colors. First, colorant proportion of basic colors and color information indicated by the instrument was applied by a linear model and a multi-layer perceptrons model with back-propagation learning method. However, satisfactory results were not obtained because of nonlinear property of colors. Thus, in this study the neuro-fuzzy model with merit of artificial neural networks and fuzzy systems was presented. The proposed model was trained with test data and colorant proportion was predicted. The effectiveness of the proposed model was verified by evaluation of color difference(${\Delta}E$).

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.331-333
• /
• 1994

A learning method for induction motor trajectory using neuro-fuzzy networks (NFN) based on fusion of fuzzy logic theory and neural networks is proposed. The premise and consequent parameters of the NFN affecting the controllers performances are modified during the learning stages by the proposed learning method to implement an optimal controller only with pre-determined target trajectory and the least amount of knowledge about an induction motor. The induction motor position control system is simulated to verify the effectiveness of the learned NF controller(NFC). The simulation results shows that the proposed learning method has good dynamic performance and small steady state error.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.299-304
• /
• 1997

A neuro-fuzzy control algorithm is applied for xenon spatial oscillations in a pressurized water reactor. The consequent and antecedent parameters of the fuzzy rules are tuned by the gradient descent mettled. The reactor model used for computer simulations is a two-point xenon oscillation model. The reactor core is axially divided into two regions and each region has one input and one output and is coupled with the other region. The interaction between the regions of the reactor core is treated by a decoupling scheme. This proposed control of mettled exhibits very fast responses to a step or a ramp change of target axial offset without any residual flux oscillations.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.871-877
• /
• 2002

현재 공작기계의 상당부분에서 자동화 및 무인화가 이루어지고 있는 추세이며, 이러한 대부분의 산업시설들과 기계류에는 회전체 부품들을 가지고 있다. 이들 부품들에서 베어링(Bearing)은 절대적으로 매우 중요한 부분을 차지하고 있으며, 만일 회전축시스템(Rotor System)에 베어링의심각한 이상은 시스템이 정지되는 사태를 불러일으킬 수도 있다. 따라서 이상에 대한 조기 감지의 역할은 전체 시스템의 향상뿐만 아니라, 비용이나 시간적인 측면에서도 크나큰 이익을 가져다 줄 수 있다. 지금까지 이러한 회전축시스템에 대한 다양한 이상진단을 시도하여 왔으며 앞으로도 많은 종류의 이상진단이 이루어지리라 생각한다. 이런 다양한 형태의 이상진단은 시스템에서 추출되는 데이터를 여러 가지 기법과 추출하는 센서의 특징을 파악하여 이상진단 알고리즘을 수립하는 과정을 망라하게 된다. 특히 이상진단 알고리즘에는 측정된 데이터의 불확실성을 감안한 이론이 적용되어야 한다. 본 연구에서는 회전축시스템의 베어링에 대한 이상진단을 통계적 기법, Fuzzy Clustering, Neural network과 Neuro-fuzzy를 이용한 기법과의 상호비교를 통해서 여러 종류의 이상을 구분하는 작업수행을 연구하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.386-392
• /
• 2001

We design the intelligent diagnosis system for deciding on operation state of TMS Analyzer in this paper. We propose the method to model the neuro-fuzzy model for diagnosing theoperation state of analyzer by using input and output signals of TMS to measure Nox and SOx. By using experiment data, neuro-fuzzy model is investigated. Validity of the proposed system is asserted by numerical simulation.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.224-226
• /
• 2006

In this paper, we have studied for analysis of the partial discharge(PD) signal in power transmission line. The PD signal has estimated as detected signal accumulation of a PRPDA method by using Labview, and analyzed with neuro-fuzzy algorithm. With practical PD logic implementation of theoretical detected system and hardware implementation, the device for Hipotronics Company's 22.9kV or 154kV setup has generated and then has applied with 18kV,20kV with 1:1 time probe. It's also used the LDPE O.27mmt (scratch error O.05mmt) to sample for making PD. Our new class of PD detected algorithm has also compared with previous PRPDA or Fuzzy algorithm, which has diagnose more conveniently by adding numerical values.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.57-61
• /
• 2013

This paper presents adaptive neuro-fuzzy inference based defect detection method for various defect types, such as micro-crack, fingerprint and contamination, in heterogeneously textured surface of polycrystalline solar wafers. Polycrystalline solar wafer consists of various crystals so the surface of solar wafer shows heterogeneously textures. Because of this property the visual inspection of defects is very difficult. In the proposed method, we use local binary feature and fuzzy reasoning for defect detection. Experimental results show that our proposed method achieves a detection rate of 80%~100%, a missing rate of 0%~20% and an over detection (overkill) rate of 9%~21%.