• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.44-47
• /
• 2004

This paper proposes an approach for composite surface reconstruction from 2D serial cross-sections, where the number of contours varies from section to section. In a triangular surface-based approach taken in most reconstruction methods, a triangular $G^{1}$ surface is constructed by stitching triangular patches over a triangular net generated from the compiled contours. In the proposed approach, the resulting surface is a composite $G^{1}$ surface consisting of three kinds of surfaces: skinned, surface is first represented by a B-spline surface approximating the serial contours of the skinned region and then serial contours of the skinned region and then transformed into a mesh of rectangular Bezier patches. On branched and capped regions, triangular $G^{1}$ surfaces are constructed so that the connections between the triangular surfaces and their neighboring surfaces are $G^{1}$ continuous. Since each skinned region is represented by an approximated rectangular $G^{2}$ surface instead of an interpolated triangular $G^{1}$ surface, the proposed approach can provide more visually pleasing surfaces and realize more efficient data reduction than the triangular surface-based approach. Some experimental results demonstrate its usefulness and quality.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.1
• /
• pp.723-733
• /
• 2009

This study proposes a sequence of procedures to extract building boundaries and planar patches through segmentation of rasterized lidar data. Although previous approaches to building extraction have been shown satisfactory, there still exist needs to increase the degree of automation. The methodologies proposed in this study are as follows: Firstly, lidar data are rasterized into grid form in order to exploit its rapid access to neighboring elevations and image operations. Secondly, propagation of errors in raw data is taken into account for in assessing the quality of gradients-driven properties and further in choosing suitable parameters. Thirdly, extraction of planar patches is conducted through a sequence of processes: histogram analysis, least squares fitting, and region merging. Experimental results show that the geometric components of building models could be extracted by the proposed approach in a streamlined way.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.719-724
• /
• 1994

This paper describes a hybrid surface-based method for smooth 3D surface approximation to a sequence of 2D cross sections. The resulting surface is a hybrid G $^{1}$ surface represented by a mesh of triangular and rectangular Bezier patches defined on skinning, branching, or capping regions. Each skinning region is approximated with a closed B_spline surface, which is transformed into a mesh of Bezier patches. Triangular G $^{1}$ surfaces are constructed over brabching and capping regions such that the transitions between each capping regions such that the transitions between each triangular surface and its neighboring skinning surfaces are G $^{1}$ continuous. Since each skinning region is represented by an approximated rectangular C $^{2}$ suface instead of an interpolated trctangular G $^{[-1000]}$ surface, the proposed method can provide more smooth surfaces and realize more efficient data reduction than triangular surfacebased method.

• Journal of Life Science
• /
• v.25 no.4
• /
• pp.369-375
• /
• 2015

Data on the spatial distribution of a plant population among administrative areas is useful for various purposes. In this study, I analyzed the spatial distribution of the geographical distances of Carex siderosticta at Mt. Geumjeong and Mt. Ahop in Korea. The aim was to test a spatial structure within two populations of C. siderosticta. Most natural plots of C. siderosticta are not uniformly distributed in the forest community; for example, uniform plots were aggregately distributed within a space of 6.0 m $\times$ 6.0 m. When the sampling plots were larger than 6.0 m $\times$ 12.0 m, the individuals of C. siderosticta were aggregately distributed. The neighboring patches of C. siderosticta were predominantly 7.5 m to 9.0 m apart, on average; however, if the natural populations were disturbed by human activities, the aggregation occurred in shorter distances than a scale of 9.0 m. Moran's I of C. siderosticta significantly differed from the expected value in only 16 of 40 cases (40%). In conclusion, the geographical distribution of C. siderosticta is not even, with varying degrees of size in the plots, while human activities give rise to density effects in the plots at both Mt. Geumjeong and Mt. Ahop in Korea.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.6
• /
• pp.98-109
• /
• 2011

Habitat restoration initiative is an important factor for the on-site preservation of butterflies. A new habitat necessitates the investigation of the ecology of the butterfly, the landscape of the habitat, the work process, and a cost analysis. In this study, these factors were analyzed through1) re-consideration of the secured results from three years of field work, and 2) a habitat area estimation conducted according to the presence or absence of larvae and adults via a Parnassius bremeri Bremer survey. The investigation of the natural habitat, done for both larvae and adult butterflies found in South Korea, suggested that multiple patches with a minimum size exceeding $300m^2$ and with an average size of about $1,600m^2$were required for survival of this butterfly. Therefore, more than five patches should be considered for butterfly habitat and patches should have similarity to the present habitat environment with transplantation plans for diet plants and honeydew plants. In addition, to activate the migration of the butterfly, cutting down trees that are obstacles to migration, minimizing the distance between patches and the addition of a stepping patch are also required. A patch connectivity analysis showed that patches should be located within 300m of neighboring patches, as the migration of the butterfly will fail if it is more than 600m. Additionally, more than $10,000m^2$ for a single patch or a patch network composed more than five patches over $1,600m^2$ in size were recommended, with a total patch size of $8,000m^2$. Additionally, neighboring multiple patch networks are more desirable than a single habitat in the event a cyclic habitat pattern arises. In this study, we suggest a habitat restoration and optimal prerequisites for a butterfly habitat. It is expected that this research will lead to the creation of a good model for the restoration of butterfly species.

• Korean journal of applied entomology
• /
• v.50 no.2
• /
• pp.97-105
• /
• 2011

Understanding the metapopulation structure and movement of a species are required for conserving the species. In this paper, migration patterns and connectivity of patches of a threatened butterfly, Parnassius bremeri Bremer, were postulated using the mark-release-recapture (MRR) technique in a habitat located in the mid-southern region of the Korean peninsula. A total of 194 individuals were captured (137 males and 57 females) and, of them, 93 individuals (73 males and 20 females) were recaptured during the MRR experiment. The migration analysis showed 23-150% immigration and 28-53% emigration. There were high correlations between the migrating individuals and the distance between patches, but there was no correlation between migrating individuals and patch size or between migrating individuals and the number of host plants. Consequently, the migration of butterflies occurred frequently between closer patches, while patch size and quantity of the food plant had minor effects on migration behavior. Additionally, males migrated more frequently than females. Analysis of the migration patterns of P. bremeri showed that the central patch played an important role on linking patch groups and more frequent migrations were monitored between nearby patches than between the remote patches. This study suggested that active migrations take place between the neighboring multiple patches and these are accelerated if there is a stepping-stone patch between them.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.9_10 s.146
• /
• pp.1359-1368
• /
• 2005

When we develop the tight-fit 2D pattern from the 3D scan data, segmentation of the 3D scan data into several parts is necessary to make a curved surface into a flat plane. In this study, Garland's method of triangle simplification was adopted to reduce the number of data point without distorting the original shape. The Runge-Kutta method was applied to make triangular patch from the 3D surface in a 2D plane. We also explored the detailed arrangement method of small 2D patches to make a tight-fit pattern for a male body. As results, minimum triangle numbers in the simplification process and efficient arrangement methods of many pieces were suggested for the optimal 2D pattern development. Among four arrangement methods, a block method is faster and easier when dealing with the triangle patches of male's upper body. Anchoring neighboring vertices of blocks to make 2D pattern was observed to be a reasonable arrangement method to get even distribution of stress in a 2D plane.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.1
• /
• pp.60-69
• /
• 1999

Motion compensation by affine transform has been proposed as a solution to the artifact problems in very low bit rate video coding and a HMA(Hexagoanl Matching Algorithm) has been proposed for refine motions estimation. When dividing images with an affine transform, as image objects do not necessarily conform to triangle patterns. In this paper we propose a method that first divides an image into triangular patches according to its edge information and then further divides the image into more detailed triangular patches where more complicated edge information occurs. We image propose a PMA(Polygona Matching Algorithm) for refine motion estimation because of the different triangle pattern types of neighboring blocks and its performance is compared with H.263.

• Journal of the Korean association of regional geographers
• /
• v.9 no.4
• /
• pp.519-533
• /
• 2003

The U.S. Conservation Reserve Program (CRP) resulted in the conversion of approximately 14.8 million ha(36.5 million acres) of cropland to grassland, woodland, and other conservation uses throughout the U.S. between 1986 and 1992. One of the major results of CRP has been the addition of millions of hectares of potential wildlife habitat. primarily as grassland. In this study, we examined regional changes in landscape structure caused by the introduction of CRP. Utilizing multi-seasonal Landsat Thematic Mapper imagery, we produced maps of cropland and grassland for the pre- and post- CRP enrollment periods for a six-county region in southwest Kansas. We then applied post-classification differencing to identify regions of cropland that had been converted to CRP. Using the FRAGSTATS spatial pattern analysis program, we calculated a variety of spatial statistics to analyze changes in landscape structure due to CRP. The major impact of CRP in the six-county study area has been the reversal of an overall trend of grassland habitat fragmentation. From the standpoint of potential wildlife habitat, the introduction of CRP has greatly increased the number of patches, mean patch size, and the interior or core area of grassland patches. In addition, CRP has increased connectivity and aggregation between grassland patches, potentially important factors for species of conservation interest, particularly those that require larger expanses of unbroken habitat. Finally, the distance between neighboring patches of grassland has decreased, reducing travel distance between patches. Clearly, the introduction of CRP has substantially modified the spatial structure of the southwest Kansas landscape, with important implications for wildlife habitat.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.4
• /
• pp.351-361
• /
• 2010

Among common estuarine submerged plants, seagrasses are the most extensively studied due to their ecological importance in estuarine ecosystems. Seagrass meadows are important biological habitats for a wide variety of marine animals and plants. They are a source of organic carbon for commercially important animals. Furthermore, seagrasses act as nutrient filters in estuarine and coastal marine ecosystems. As such, mapping the distribution of seagrass beds is important for management and conservation strategies. In order to survey the seagrass distribution within the Seomjin Estuary, We directly observed seagrass beds in Kwangyang and Hadong using SCUBA. The distribution area, species composition, morphology, density, biomass and productivity of seagrass meadows were examined. Seagrass meadows were distributed in the intertidal and subtidal zones of the Galsa tidal flats, and in the subtidal zone of the neighboring POSCO area. Patches of Zostera japonica was found at patches at the Galsa tidal flats intermediate point. The total estimated seagrass distribution area of the Seomjin Estuary was $1.84\;km^2$. Of the total, $1.83\;km^2$ was Zostera marina (eelgrass) and $0.01\;km^2$ was Zostera japonica (dwarf eelgrass). Zostera japonica was found in intertidal zones. Zostera marina was found from the intertidal to subtidal zones at a 2 m mean sea level (MSL) depth. The leaf productivity of Zostera marina was $4.47g\;DW\;m^{-2}\;day^{-1}$. The annual production of eelgrass was $1,632\;g\;DW\;m^{-2}\;yr^{-1}$, which corresponds to $731g\;C\;m^{-2}\;yr^{-1}$. The total production of eelgrass was $3,002\;tons\;DW\;yr^{-1}$, which corresponds to $1,343\;tons\;C\;yr^{-1}$.