• Journal of the Korean Society of Safety
• /
• v.35 no.2
• /
• pp.111-117
• /
• 2020

When KS C IEC 60069-10-1(2015) standard is applied to estimate a hazardous area, the chart showing the relationship between a hazardous area distance and release characteristic is used as a guide to determine the extent of hazardous zones for various forms of release. Three release characteristic lines based on the three types of release as an unimpeded jet release with high velocity, a diffusive jet release with low velocity, and a release of heavy gases or vapours that spread along horizontal surfaces are given. As these characteristic lines have the low limit threshold, it is difficult to estimate the hazardous area distance when the value of release characteristic is under the low limit threshold. And KS C IEC 60079-10-1(2015) standard shows the concept for a zone of Negligible extent(NE) which can be considered as non hazardous area, but it is also difficult to apply the concept of a Negligible extent. The purpose of this paper is to suggest the guideline for the release characteristic to decide a hazardous area distance and the Negligible extent(NE) being considered as non-hazardous area when deciding a hazardous area distances by the KS C IEC 60079-10-1 standard.

• Ocean and Polar Research
• /
• v.23 no.4
• /
• pp.401-410
• /
• 2001

Global climate change will alter many such properties of the Southern Ocean as temperature, circulation, stratification, and sea-ice extent. Such changes are likely to influence the species composition and activity of Antarctic marine microorganisms (protists and bacteria) which playa major role in deter-mining the concentration of atmospheric $CO_2$ and producing precursors of cloud condensation nuclei. Direct impacts of climate change on Antarctic marine microorganisms have been determined for very few species. Increasing water temperature would be expected to result in a southward spread of pelagic cyanobacteria, coccolithophorids and others. Growth rates of many species would be expected to increase slightly but nutrient limitation, especially micronutrients, is likely to result in a negligible increase in biomass. The extent of habitats would be reduced for those organisms presently living close to the upper limit of their thermal tolerance. Increased UVB irradiance is likely to favour the growth of those organisms tolerant of UVB and may change the trophic structure of marine communities. Indirect effects, especially those as a consequence of a diminution of the amount of sea-ice and increased upper ocean stratification, are predicted to lead to a change in species composition and impacts on both trophodynamics and vertical carbon flux.

• BMB Reports
• /
• v.28 no.4
• /
• pp.311-315
• /
• 1995

Exogenous $Cu^{2+}$ or $Zn^{2+}$ at micromolar concentration had a strong inhibitory effect on detergent-solubilized cytochrome c oxidase. A similar effect was observed when $Cu^{2+}$ was added to vesicular cytochrome c oxidase, although the extent of inhibition was significantly larger for the uncoupled state than for the coupled state. Interestingly, the inhibition by $Zn^{2+}$ was almost negligible for both the coupled and uncoupled states. These results suggest that the binding sites for $Cu^{2+}$ ions are exposed to the extravesicular side. whereas those for $Zn^{2+}$ are exposed to the matrix side. The EPR spectra of bound $Cu^{2+}$ ions at 77 K indicate that each of the first two $Cu^{2+}$ ions is ligated by three or four histidine residues, as evidenced by distinct $^{14}N$ superhyperfine splitting. These $Cu^{2+}$ ions can not be removed readily by EDTA and inhibit the enzyme activity by as much as 80%.

• Steel and Composite Structures
• /
• v.25 no.5
• /
• pp.523-534
• /
• 2017

Cable-supported ribbed beam composite slab structure (CBS) is proposed in this study. As a new cable-supported structure, it has many merits such as long span availability and cost-saving. Inspired by the previous research on cable-supported structures, the fabrication and construction process are developed. Pre-stress design method based on static equilibrium analysis is presented. In the algorithm, the iteration convergence can be accelerated and the calculation result can be kept in an acceptable precision by setting a rational threshold value. The accuracy of this method is also verified by experimental study on a 1:5 scaled model. Further, important parameters affecting the mechanical features of the CBS are discussed. The results indicate that the increases of sag-span ratio, depth of the ribbed beam and cable diameter can improve the mechanical behavior of the CBS by some extent, but the influence of strut sections on mechanical behavior of the CBS is negligible.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2995-3000
• /
• 2008

Understanding of the impinging behavior of an electrically charged spray is essential in determining appropriate operating conditions for electro-spraying of paints, surface coating materials and insecticides. In the present work, the wall impact behavior of an electrically charged drop has been investigated and compared with that of a neutral drop experimentally. The critical Sommerfeld number representing the spread-splash boundary for the charged drop impacting on the dielectric substrate turned out to be larger compared to that for the neutral drop with the same surface condition. The change of the transition boundary is due to the increase in the surface wettability of the drop on the substrate. However, with the electrically conducting substrates, the charging effect on the transition boundary appeared negligible. This is because the electric discharging time is much shorter than the time required for the flattened drop to reach its maximum extent.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.351-357
• /
• 2006

In this study, quantitative sensitivity analysis on rockfill material influencing the dam crest displacement of Concrete-Faced Rockfill Dam(CFRD) subjected to earthquake loading was carried out. The purpose of this study is to indicate the most important input parameter and to show the quantitative variation of displacement at the crest of CFR type dam during earthquake loading with this input parameter. From the sensitivity analysis, it was found that the crest displacement of CFR type dam subjected to dynamic loading was absolutely affected by the shear modulus of rockfill material and the effect of friction angle of it was negligible. This relative difference of sensitivity was more outstanding in case of crest settlement than in case of crest horizontal displacement. Also, it was found that the extent of effect of shear modulus on the displacement at the crest of CFRD due to dynamic loading decreased as maximum amplitude of input acceleration increased.

• Applied Biological Chemistry
• /
• v.25 no.3
• /
• pp.161-165
• /
• 1982

In order to find out pertinent methods for the acceleration of browing during ginseng processing, various treatments were made or fresh ginseng (Panax Ginseng C.A. Meyer) with sugars, amino acids and inorganic nitrogenous compounds and the extent of browning was measured. Among sugars tested, maltose resulted in the greatest acceleration of browning followed in decreasing order by glucose and lactose, whereas pentoses, fructose, sucrose and raffinose had negligible effect. A marked browning occurred in ginseng treated with basic amino acids, while the extent of browning was not greatly increased when ginseng was treated with aliphatic amino acids, hydroxy amino acids, or acidic amino acids used in the experiment. Among treatments with sugar-amino acid mixture, a mixture of glucose with glutamic acid gave the greatest acceleration. The brown color intensity gradually increased with an increase in glucose concentration for up to 0.5M. inorganic nitrogenous compounds enhanced the browning in general, and the effect varied greatly with the different compounds.

• Physical Therapy Korea
• /
• v.8 no.1
• /
• pp.89-96
• /
• 2001

This study addresses the effects of treadmill training on hyperextended knee and cadence in patients with hemiplegia. A single subject research design with multiple baselines across individuals was used for the study. Two patients with hemiplegia participated in the experiment. The experiment consisted of interventions where the patients were asked to ambulate for 15 minutes at a comfortable walking speed on the treadmill with 11% slope grade and were allowed to rest for 10 minutes. Patients, then, were asked to ambulated 20 meters at walkway. The number of occurrences of knee hyperextension and the total number of steps were recorded. The results showed that the occurrence of knee hyperextension decreased by approximately 30% after the first session of the treadmill training and continued to gradually decrease during the following sets of treadmill training. Meanwhile, there was a slight increase in the cadence to a negligible extent. These results suggest that the gait training on the sloped treadmill may be helpful for correcting the knee hyperextension in patients with hemiplegia.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.2
• /
• pp.213-222
• /
• 2011

To check adaptability of low ash coal(hyper coal) to chemical looping combustion, reaction characteristics of two coals (Roto and Hyper coal) with two oxygen carriers (NiO/bentonite, OCN703-1100) have been investigated in a thermogravimetric analyzer. Hyper coal represented low combustion rate and high ignition temperature, high volatile content and high devolatilization rate, and therefore, showed worse oxygen transfer during successive 10 cycle reduction-oxidation test than Roto coal. Finally we selected Roto coal as the candidate coal for chemical looping combustion. For Roto coal, OCN703-1100 particle showed better oxygen transfer than NiO/bentonite particle. During 10 cycle reduction oxidation test, change of the extent of oxidation (Wo) was negligible and we could conclude that both oxygen carriers have sufficient regeneration ability.

• Journal of Information Technology Applications and Management
• /
• v.17 no.3
• /
• pp.121-134
• /
• 2010

Past studies in e-commerce loyalty were mostly focused on the effects of customer satisfaction and trust on loyalty toward online vendors. Few studies investigated the impacts of switching barriers, whilst they are widely proven to affect customer loyalty in offline commerce. Even in a handful of studies that did deal with switching barriers, their treatment of the subject remained at best superficial. This may have to do with the fact that switching costs in e-commerce could be comparatively negligible, as switching to another online vendor often involves one simple mouse click. In this study, we investigated the impact of switching barriers on loyalty under the e-commerce context. Furthermore, the extent of switching barriers which could be affected by those positive factors (most constructs were adopted from IDT) was also examined. The statistical testing results revealed that combined model which includes both the positive factors and the switching barriers explains the loyalty formation process more strongly ($R^2$ = 0.543) than each separated models ($R^2$ = 0.468 for positive factor only model, and $R^2$ = 0.365 for switching barrier only model). While only the two switching barriers such as convenience and emotional were shown to be statistically significant, we found that trust strongly influences customer's emotional barrier, let alone direct impact on loyalty, which thereby influences loyalty. The results offer insights for better understanding switching barriers in e-commerce related applications.