• Earthquakes and Structures
• /
• 제8권2호
• /
• pp.463-484
• /
• 2015

Modern codes for earthquake resistant building design require consideration of the so-called accidental design eccentricity, to account for torsional response caused by several factors not explicitly considered in design. This provision requires that the mass centres in the building floor be moved a certain percentage of the building's dimension (usually 5%) along both the x and y axes and in both positive and negative directions. If one considers also the spatial combinations of the two component motion in a dynamic analysis of the building, the number of required analyses and combinations increases substantially, causing a corresponding work load increase for practicing structural engineers. Another shortcoming of this code provision is that its introduction has been based primarily on elastic results from investigations of oversimplified, hence questionable, one story building models. This problem is addressed in the present paper using four groups of eccentric braced steel buildings, designed in accordance with Eurocodes 3 (steel) and 8 (earthquake design), with and without accidental eccentricities considered. The results indicate that although accidental design eccentricities can lead to somewhat reduced inelastic response demands, the benefit is not significant from a practical point of view. This leads to suggestions that accidental design eccentricities should probably be abolished or perhaps replaced by a simpler and more effective design provision, at least for torsionally stiff buildings that constitute the vast majority of buildings encountered in practice.

• 수면정신생리
• /
• 제23권2호
• /
• pp.93-96
• /
• 2016

Obstructive sleep apnea syndrome (OSAS) has negative effects on health, including increased mortality, risk of cardiovascular disease, and neurocognitive difficulties. OSAS is common in obese patients and obesity is an important risk factor of OSAS. A 41-year-old female OSAS patient with severe obesity (body mass index [BMI] ${\geq}35$) who failed dietary weight loss underwent bariatric surgery. After surgery, there were improvements in BMI (from 36.9 to $31.7kg/m^2$) and polysomnographic data, including the apnea-hypopnea index (from 25.1 to 11.2 events/hr) and minimum SaO2 (from 69 to 82%). This case demonstrates that bariatric surgery may be an effective therapeutic option to reduce sleep-disordered breathing in severely obese patients with moderate OSAS. Bariatric surgery as a treatment option for OSAS should be considered in OSAS patients with severe obesity who failed dietary weight loss.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.851_852
• /
• 2009

Shrink fitting which is assembling process to fix stator core on the motor frame is widely used at the mass production line of motors because of cost and productivity. This process produces compressive stress on a stator core, which causes negative effect for example, core and copper losses on motor performance. Magnetic properties of electrical steel are effected by both compressive and tensile and thermal stresses. Electromagnetic field analysis is considered one of the effective process since one can predict motor performance including core loss precisely. This method can consider non linear magnetic property with magnetic saturation which is typical electrical steel behavior. However this method is strongly depended on non linear magnetic data, one may have different calculation result whether considering mechanical stress or not. This study describes magnetic field analysis of a motor considering mechanical stress from shrink fitting. Analysis results are compared with each stress-free and stressed condition.

• 한국소음진동공학회논문집
• /
• 제27권2호
• /
• pp.195-203
• /
• 2017

This paper is concerned with the active vibration control of shell structure that is subjected to internal unbalanced excitation by using active mounts and accelerometers. The unbalanced excitation is caused by a rotating unbalanced mass. The control algorithm considered in this study is the negative acceleration feedback (NAF) control. A simplified dynamic model was derived to verify the effectiveness of the NAF control. Four actuators and four accelerometers were mounted on the shell structure, so that the multiple-input and multiple-output (MIMO) NAF controller was designed by both centralized and decentralized ways. Numerical results show that both the decentralized and centralized NAF controllers are effective. Based on the numerical simulation, the proposed decentralized NAF controller was applied to the real shell structure. Experimental results show that the proposed decentralized NAF controller can effectively suppress vibrations of the shell structure.

• 한국치위생학회지
• /
• 제9권1호
• /
• pp.113-123
• /
• 2009

This study was undertaken evaluate the general image for dental hygienist. A questionnaire was given to each Dentist, the staff of dental. 65 Dentist, 145 the staff of dental were included in the subjects between Jul. 1 and Oct. 30, 2008. The collected data was analysed by the SPSS Win 12.0/PC using frequency, percentage, mean, standard deviation, chi-square, t-test, ANOVA. The image for the dental hygienist was analyzed by 28 items. As a result of analysis on image of dental hygienist, The Dentist's group and staff's group, both appreciated positive image that explain process of treatment to patient very well, having professional knowledge and experienced skill, carries on an effective and valuable work. give a confidenced to patient. These group also gave negative image in the aspect that the dental hygienist is stressful job, handmaid of Dentist, participate of decided something for dental clinic, having association activities. It is necessary for dental hygienist by oneself development ability through science congress variety major and acquirement new technology, exchange information, interchange activities, and association of dental hygienist should efforts for growing up image through mass media.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 2001년도 Proceedings of 2001 KSAM Annual Meeting
• /
• pp.14-16
• /
• 2001

The outer membrane (OM) of gram-negative bacteria acts as an effective permeability barrier against noxious agents including several antibiotics and organic solvents, and lipopolysaccharide (LPS) is the key molecule for this function. Outer membrane modified mutants (Ml-166, M2-42, M3-21) of E. coli DH5$\alpha$/pBSl were selected through a mutation using EMS (ethyl-methane-sulfonate). Among the selected mutants, M3-21 was twice as sensitive as LumisTo $x^{ }$ to benzene and M2-41 was 8 times as sensitive as LumisTo $x^{ }$ to toluene. To identify the structural change in the membrane by mutation, the relative cell surface hydrophobicities and the absorption of the crystal violet to the organisms were measured. All the mutants absorbed more crystal violet than their parent and the absorption of crystal violet increased in cell walls as carbohydrate of lipopolysaccharide decreased. When the cell surface hydrophobicities of DH5/pBSl and its mutants were measured by the BATH, the hydrophobicities of mutants increased compared to their parent in several organic solvents. The difference of lipopolysaccharide between DH5/pBSl and its mutants was identified by various ways such as the SDS-PAGE gel, the screening of LPS molecular weights, the mass spectrometry, and MALDI-TOF.F.

• 한방비만학회지
• /
• 제9권1호
• /
• pp.53-58
• /
• 2009

Objectives The purpose of this study was to investigate the clinical effect of oriental medical therapy on obesity and the progress of weight loss through an oriental obesity program. Methods The subjects were treated from January 2008 to February 2009 in J Korean Medical Hospital. Herbal medical Hospital. Herbal medicine, electrolipolysis, auricular acupuncture were performed during the treatment period. We checked the change of weight every treatment time and measured the body composition by bioelectrical impedance analysis(BIA) every 2 weeks. Results The progress of weight loss was steady in the first 4 weeks except for the sixth weight check. After 4 weeks treatment, the weight loss was 3.52${\pm}$1.98Kg and 4.83${\pm}$2.68%. Total fat mass measured by BIA significantly decreased 2.58${\pm}$1.30Kg after 4 weeks. Age and the weight loss were significantly negative correlated. Conclusions Oriental obesity treatment could be effective on obesity, but further studies would be needed for the foundation of a clinical guideline reflecting various factors.

• Journal of Yeungnam Medical Science
• /
• 제21권2호
• /
• pp.133-142
• /
• 2004

Chronic obstructive pulmonary disease(COPD) is characterized by a not entirely reversible limitation in the airflow. An airflow limitation is progressive and associated with an abnormal inflammatory response of the lung to gases and harmful particles. In COPD, the weight loss is commonly observed and there is a negative impact on the respiratory as well as skeletal muscle function. The pathophysiological mechanisms that result in weight loss in COPD are not fully understood. However, the mechanisms of weight loss in COPD may be the result of an increased energy expenditure unbalanced by an adequate dietary intake. The commonly occurring weight loss and muscle wasting in COPD patients adversely affect the respiratory and peripheral muscle function, the exercise capacity, the health status, and even the survival rates. Therefore, it is very valuable to include management strategies that the increase energy balance in order to increase the weight and fat free mass. A Better understanding of the molecular and cellular pathological mechanisms of COPD can improve the many new directions for both the basic and clinical investigations. The Nutritional supply is an important components of a multidisciplinary pulmonary rehabilitation program. Future studies combining an exercise program, the role of anabolic steroids, nutritional individualization, a more targeted nutritional therapy, and the development of new drugs including anti-cytokines is needed for the effective management of COPD.

• 한국분무공학회지
• /
• 제7권2호
• /
• pp.7-15
• /
• 2002

A particle flow visualization, electrostatic charging measurement and separation of triboelectrically charged particles in the external electric field by a fluidized bed tribocharger are conducted for the removal of PVC particles from mixed waste plastics. The laboratory-scale triboelectrostatic separation system consists of the fluidized bed tribocharger, a separation chamber, a collection chamber and a controller. PVC and PET particles can be imparted negative and positive surface charges respectively due to the difference of triboelectric charging series between particles and particles in the fluidized bed tribocharger, and can be separated by passing them through an external electric field. To visualize these charged particles, He-Ne laser is used with cylindrical lenses to generate a sheet beam. In the charging measurement, the particle motion analysis system (PMAS), capable of determining particle velocity and diameter. is used to non-intrusively measure particle behavior in high strength electric field. The average charge-to-mass ratios of PVC and PET particles are $1.4\;and\;1.2{\mu}C/kg$, respectively. The highly concentrated PVC (91.9%) can be recovered with a yield of about 96.1% from the mixture of PVC and PET materials for a single-stage processing. The triboelectrostatic separation system using the fluidized tribocharger shows the potential to be an effective method for removing PVC from mixed plastics for waste plastic recycling.

• Smart Structures and Systems
• /
• 제26권6호
• /
• pp.765-779
• /
• 2020

Collapse of bridges in recent earthquakes demonstrates the need to deepen the understanding of the behaviour of these structures against seismic actions. This paper presents a highly detailed numerical model of an actual bridge subjected to extreme seismic action which results in its collapse. Normally, nonlinear numerical models have high difficulties to achieve convergence when reinforced concrete is intended to be represented. The main objective of this work is to determine the efficiency of different passive control strategies to prevent the structural collapse of an existing bridge. Metallic dampers and seismic isolation by decoupling the mass were evaluated. The response is evaluated not only in terms of reduction of displacements, but also in increasing of shear force and axial force in key elements, which can be a negative characteristic of the systems studied. It can be concluded that the use of a metallic damper significantly reduces the horizontal displacements and ensures the integrity of the structure from extreme seismic actions. Moreover, the isolation of the deck, which in principle seems to be the most effective solution to protect existing bridges, proves inadequate for the case analysed due to its dynamic characteristics and its particular geometry and an unpredictable type of axial pounding in the columns. This unexpected effect on the isolation system would have been impossible to identify with simplified models.