• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.425-428
• /
• 2009

Aerospace engine application needs to stand high temperature and pressure. Because of its mechanical properties such as high strength at high temperature, Alloy 718 is used aerospace engine application about 80%. But alloy 718's mechanical properties cause some problem to manufacturing profile ring like damage of material and mold. In this study, alloy 718's mechanical properties investigated for knowing its formability and using FE-Simulation for designing profile ring roll process and mold shape. Profile ring rolling processing is designed with "Initial material$\rightarrow$Blank$\rightarrow$Linear Ring$\rightarrow$Profilering". Blank's heating temperature is setting $1100^{\circ}C$ for manufacturing a trial profile ring on the basis of FE-Simulation. As a result of manufacturing alloy 718 profile ring, it is possible to make near target profile shape ring with all of the processing condition which gives in this study.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.590-595
• /
• 2000

On the contrary to the increasing needs of shape qualities, most of quality inspections are carried out by manual or operator's insight. To find the causes of shape inferiority, it is required to gather and analyze the shape measurement data. As a result the winding profile measurement system ($TELE-SCANNER^{(R)}$) is developed to analyze the coiling process and automate the manual measuring process for winding profile of hot-rolled coils. The winding profile measurement system measures and analyzes winding profile shapes of hot-rolled coils, and classifies them into several dominant patterns that are related to normal or abnormal mechanical conditions of down-coiler. The system also contains analysis software to quantify the winding profile shapes and patterns, and to produce statistics to help search the causes of profile shape inferiority.

• The KIPS Transactions:PartC
• /
• v.15C no.1
• /
• pp.69-78
• /
• 2008

In this paper, we propose the effective exchange-method of a user profile for adapted contents services in the contents adaptation system. The profiles continuously exchange among the devices of contents adaption system for providing the adapted contents to a user. The profile should be also exchanged according to periodic, aperiodic, event, request and response. Consequently, a lot of network traffic occur and computing power require. Solving theses problem, the profile exchange research needs. we analyze creation information, exchange information, and exchange form of the profile information in contents adaptation system for effective profile exchange and define exchange procedure of the profile using the analyzed profile information. we also propose providing method of the profile configured information for decreasing profile processing time and user setting method for decreasing the number of profile transmission. As a result of performance evaluation, providing method of the profile configured information reduce 7% processing time and user setting method decrease the number of profile transmission are effective to exchange the profile.

• Journal of KIISE:Software and Applications
• /
• v.37 no.4
• /
• pp.252-263
• /
• 2010

The needs of low-power embedded software are being increased. Along with the needs, the studies to predict the power consumption of embedded software are also being increased. Although existing studies for power analysis have been performed in source code-based, these code-based analysis have some shortages of long analysis time and much feedback efforts. Recently some studies of power analysis based on software models are prompted. This paper describes on the model-based approach using UML diagrams in embedded software development process. Specially we focus on the extension of OMG's MARTE Profile to support model-based analysis. The MARTE extension gives the possibility of power analysis using just UML diagrams without any other analysis model in embedded software development.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.3
• /
• pp.135-138
• /
• 2017

This study analyzed with the case analysis of a series of processes from job analysis survey and results analysis, and academic achievement in order to transform the curriculum of existing courses of the NCS-based video broadcasting. Also this study analysed the existing curriculum and analyzed the trend of workforce trends and needs of the broadcasting content industry. Also through a needs analysis for the industry and alumni and students, video graphics, video editing and video directing were selected. In this paper it dealt mainly with respect to the video graphics in a dual job. Modeling capability into the unit through a job analysis, animation, effects and lighting were chosen accordingly based introduction of graphics and application of graphics were derived two courses and selected profiles and performance criteria. This training according to the NCS curriculum for students was evaluated based on the student's job was to investigate the learning ability.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.1
• /
• pp.5-10
• /
• 2013

The performance of screw air compressor is affected by rotor profile, lobe number, air end wrap angle, rotor L/D ratio, suction and discharge ports, revolutions of air end and load regulation control, etc. In general, an efficient screw compressor needs a rotor profile of which has a large flow cross-section area, short sealing lines and a small blow-hole. In this study, experimental study was performed with newly designed $5{\times}6$ rotor profile and various shapes of air end. Results show that the measured specific power consumption of the newly designed screw compressor appeared to be lower than any other published data for the equivalent screw compressors manufactured.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.263-266
• /
• 2002

An optical method for surface roughness estimation based on statistical analysis of the light intensity of a scattered laser beam pattern. The method is very simple but has a disadvantage that no more information than the averaged roughness is estimated. In this study a new try was conducted to derive more advanced surface information from the details of the light intensity distribution. Some periodic ripples among the light intensity distribution being assumed to relate with scratch left on the machined surface, a corresponding surface profile is estimated from the ripples using FFT and IFFT algorithm. IFFT technique is used to extract some dominant signal components among the intensity distribution. Compared to the measured profiles by a stylus type surf-tester, the profiles obtained through the proposed method are probably acceptable in a sense of the profile shape. Calibration of the amplitude needs more works in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.632-634
• /
• 2012

In order for the connection to the wireless network from the list of priorities of the wireless AP to AP profile automatic connection by selecting the preferred method to register a profile, which is determined at the time of the change, the user does not respond to the demands of the part. In this study, the frequency of the user's access in accordance with the wireless AP, and by creating a profile, the user needs to meet with regard to network access adaptive research.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.281-287
• /
• 2008

An acousto-optic tunable filter based 3-D micro surface profile measurement using an equally spaced 5 spectral phase shifting is described. The 5-bucket spectral phase shifting method is compared with a Fourier-transform method in the spectral domain. It can provide a fast measurement capability while maintaining high accuracy since it needs only 5 pieces of spectrally phase shifted imaging data and a simple calculation in comparison with the Fourier transform method that requires full wavelength scanning data and relatively complicated computation. The 3-D profile data of micro objects can be obtained in a few seconds with an accuracy of ${\sim}10nm$. The 3-D profile method also has an inherent benefit in terms of being speckle-free in measuring diffuse micro objects by employing an incoherent light source. Those simplicity and practical applicability is expected to have diverse applications in 3-D micro profilometry such as semiconductors and micro-biology.

• Safety and Health at Work
• /
• v.4 no.2
• /
• pp.117-121
• /
• 2013

This paper describes progress on formulating a national asbestos profile for the country of Vietnam. The Center of Asbestos Resource, Vietnam, formulated a National Profile on Asbestos-related Occupational Health, with due reference to the International Labor Organization/World Health Organization National Asbestos Profile. The Center of Asbestos Resource was established by the Vietnamese Health Environment Management Agency and the National Institute of Labor Protection, with the support of the Australian Agency for International Development, as a coordinating point for asbestos-related issues in Vietnam. Under the National Profile on Asbestos-related Occupational Health framework, the Center of Asbestos Resource succeeded in compiling relevant information for 15 of the 18 designated items outlined in the International Labor Organization/World Health Organization National Asbestos Profile, some overlaps of the information items notwithstanding. Today, Vietnam continues to import and use an average of more than 60,000 metric tons of raw asbestos per year. Information on asbestos-related diseases is limited, but the country has begun to diagnose mesothelioma cases, with the technical cooperation of Japan. As it stands, the National Profile on Asbestos-related Occupational Health needs further work and updating. However, we envisage that the National Profile on Asbestos-related Occupational Health will ultimately facilitate the smooth transition to an asbestos-free Vietnam.