• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.3
• /
• pp.248-254
• /
• 2005

The purpose of this study was to investigate the distribution of stress within the regenerated bone surrounding the implant using three dimensional finite element stress analysis method. Using ANSYS software revision 6.0 (IronCAD LLC, USA), a program was written to generate a model simulating a cylindrical block section of the mandible 20 mm in height and 10 mm in diameter. The $5.0{\times}11.5-mm$ screw implant (3i, USA) was used for this study, and was assumed to be 100% osseointegrated. And it was restored with gold crown with resin filling at the central fossa area. The implant was surrounded by the regenerated type IV bone, with 4 mm in width and 7 mm apical to the platform of implant in length. And the regenerated bone was surrounded by type I, type II, and type III bone, respectively. The present study used a fine grid model incorporating elements between 250,820 and 352,494 and nodal points between 47,978 and 67,471. A load of 200N was applied at the 3 points on occlusal surfaces of the restoration, the central fossa, outside point of the central fossa with resin filling into screw hole, and the functional cusp, at a 0 degree angle to the vertical axis of the implant, respectively. The results were as follows: 1. The stress distribution in the regenerated bone-implant interface was highly dependent on both the density of the native bone surrounding the regenerated bone and the loading point. 2. A load of 200N at the buccal cusp produced 5-fold increase in the stress concentration at the neck of the implant and apex of regenerated bone irrespective of surrounding bone density compared to a load of 200N at the central fossa. 3. It was found that stress was more homogeneously distributed along the side of implant when the implant was surrounded by both regenerated bone and native type III bone. In summary, these data indicate that concentration of stress on the implant-regenerated bone interface depends on both the native bone quality surrounding the regenerated bone adjacent to implant and the load direction applied on the prosthesis.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.5
• /
• pp.722-727
• /
• 2010

This paper is presented to study simplification of face image using cubic spline interpolation for a business card with 2D barcode. People often forget business card's owner because business cards don't be included a face picture generally. To solve such problem, many applications have be developed through mobile devices, Internet and so on. But they couldn't caught up with value of existing business card mad by paper. Hence, some methods which can put information on business card using 1D or 2D barcode had suggested. but they couldn't include information like face image or company logo image which have too much data. Therefore, we study the simplification method of face image to encode from a face image to 2D barcode. The simplification method using spline curves defined by feature points which we dotted on face, ears, hair, eyebrows, nose, lips, neck, etc.. on a face area. for experiment, we see real face image and simplified face image made by proposed method after we automatically extract face watch through camera. In experimental results, data of simplified face image was reduced as small as it can be expressed by 2D barcode, and confirmed that it can effectively express features.

• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.79-84
• /
• 2007

In this paper, the finite element analysis of a valve screw for a LPG cylinder has been presented on the leakage safety and strength one, which are computed and investigated by a contact normal stress and von Mises stress between a female screw of a valve and a male screw of a neck ring in a LPG bombe. The LP gas charging pressure of a LPG bombe is $8{\sim}9kg/cm^2$, which is pressurized to the screw sealing contact areas between a valve and a LP gas cylinder. The peak failures of the screw tooth height due to a scratch wear and chipping loss of the contact area may decrease screw tooth strength and increase a leakage of a LP gas. These are strongly affect to the contact normal and von Mises stresses of the valve screws. The FEM computed results show that the tooth height loss due to a wear and chipping failure of the screw peak does not affect to the LP gas leak and strength of a valve screw theoretically. But if the tooth wear of the screw height of a brass valve overpasses the critical strength safety of the valve, the valve screw may be failed in fastening the valve and a LP gas bombe suddenly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1318-1327
• /
• 2012

With the recent increased risk of livestock disease spread and human infection, livestock disease control has become very important. Consequently, there has been an increased attention on an implantable real-time monitoring and traceability system for individual cattle. Therefore, we have developed a robust monitoring and traceability system based on an implantable MFAN/RFID sensor tag. Our design combines the MFAN technology that is capable of robust wireless communication within cattle sheds and the 900MHz RFID technology that is capable of wireless communication without battery. In MFAN/RFID implantable sensor tag monitoring system, UHF sensor tag is implanted under the skin and accurately monitors the body temperature and biological changes without being affected by external environment. In order to acquire power needed by the tag, we install a MFAN/RFID tranceiver on the neck of cattle. The MFAN coordinator passes through the MFAN node and the RFID-reader-combined MFAN/RFID transceiver and transmits/receives the data and power for the sensor tag. The data stored in the MFAN coordinator is transmitted via the internet to the livestock history monitoring system, where it is stored and managed. By developing this system, we hope to alleviate the problems related to livestock disease control.

• Applied Microscopy
• /
• v.29 no.1
• /
• pp.11-23
• /
• 1999

Ultrastructure of the ependymal cells of X-irradiated rats on their head were studied. Rats weighing $200\sim250gm$ were X-irradiated on their head and neck areas. Total exposures were 3,000 rads or 6,000 rads depending on experimental groups. And irradiated rats were sacrificed on 6 hours, 2 days and 6 days following the radiation exposures. Animals were perfused through the heart with 1% glutaraldehyde-1% paraformaldehyde solution, under ether-anesthesia. The tissues from the wall of lateral ventricles were fixed in the 2% osmium tetroxide solution. The results observed with electron microscope were as follow: 1. In 6 hours group, many ependymal cells were swelled, luminal portions of cytoplasms of some cells protruded into the ventricular lumen, and many cilia were lost or irregularly altered. 2. In 2 days group, ependymal cells were swelled more severely and subependymal edema were pronounced. 3. Protruded cytoplasm contained usually basal bodies of cilia, groups of mitochondria, endoplasmic reticula , etc. 4. Following X-irradiations, some protruded masses contained neural elements including the axon terminals with dense core vesicles. Axons and axon terminals were also found in the enlarged intercellular spaces among ependymal cells. From the above results, the heavy irradiation on the head area of the rat induced alteration of the ependymal cells lining the lateral ventricle. Hence the ependymal functions of selective barrier, protective barrier, and metabolic barrier could be altered following X-irradiation on the head.

• Journal of Fashion Business
• /
• v.20 no.4
• /
• pp.189-206
• /
• 2016

A breast model was for the human body was devised by studying a body scan and human body index of a desirable breast type. Thus, when manufacturing various 3D models, these results can accordingly become a fundamental basis for realizing a desirable breast model. This study aims to provide a basic data for designing the cup patterns of brassieres in order to improve the function and wearing comfort. The comfort of three kinds of brassieres were compared: one manufactured by the actual measured size; another manufactured as per the ratio of desirable upper and lower breast lengths; and the third manufactured by the 3D model attained by the desirable human body ratio. In this study, we suggest a process for realizing the desirable breast model using the ratio of bust breadth and waist front length, which are the components for deciding the appropriate position and size of breast, and which are easy to measure. The ideal breast shape is an equilateral triangle formed by connecting the nipple with the center of the clavicle. After deciding the interval between the nipples, this value can be used to configure the locations of nipples by drawing a tangent, with equal length, from the anterior neck point (which is the center of clavicle) to the nipple. Also, since inside points of breast do not exist, the outer point of breast, upper point of breast, and below point of breast on the same plane, and the depths from the nipple point to the respective points, are applied to simulate a 3D image, by modifications along the x, y, and z axes. Depending on the type of breast, the length from the center of shoulder to the nipple, the diameter of breast, upper length of breast, and the position of nipple, are different. In conical or protruding breast, the wearing sensation is better when the nipple point of brassiere was lifted, by modifying the upper and lower lengths of breast. Considering the wearing sensation and function of a brassiere, it was better to leave the wearer's size as it is and use a pad within the same cup, rather than increase the basal area of the breast in order to increase the volume.

• Korean Journal of Acupuncture
• /
• v.40 no.3
• /
• pp.62-78
• /
• 2023

Objectives : This study aims to assess the impact of acupotomy on migraine through an examination of clinical studies conducted since 2015. Methods : We conducted a comprehensive search for randomized controlled trials (RCTs) and non-randomized controlled trials (nRCTs) related to acupotomy treatment for migraine, utilizing five Korean online databases (OASIS, Science ON, DBPIA, KISS, RISS), as well as four foreign online databases (CNKI, PubMed, EMBASE, Cochrane Library). We identified a total of 10 relevant studies for analysis. Participants characteristics, treatment points, combination treatments, treatment cycles or frequencies, evaluation indices, efficacy, and adverse events were analyzed. The risk of bias in the 10 RCTs was assessed using the Revised Cochrane risk-of-bias tool for randomized trials (RoB 2.0). Results : A total of 931 participants were included in 10 studies. In the intervention group, the average duration of migraine morbidity ranged from 15.5±4.5 months to 15.9±4.2 years. Six studies based their diagnoses on the International Classification of Headache Disorders (ICHD), while five studies relied on Chinese diagnostic criteria. All studies specified the treatment area as the region exhibiting tenderness or induration on the head and neck. Treatment cycles ranged from a minimum of 2 days to a maximum of 1 week, with the number of days per treatment course varied from 5 days to 4 weeks. The diameter of acupuncture needles used varied between 0.3 mm and 1 mm. Of the eight studies specifying needle length, the shortest was 20 mm, and the longest was 40 mm. A total of eight evaluation indices were employed, with total efficacy rate (TER) and visual analogue scale (VAS) being the most frequently used. Statistically, all intervention groups showed more significant results compared to the control groups. Adverse events were reported in only two studies within the intervention group. Overall, the risk of bias assessment for the selected RCTs ranged from 'some concerns' to 'high risk of bias.' Conclusions : This study showed that acupotomy treatments for migraine were effective.

• Journal of Korean Dental Hygiene Science
• /
• v.1 no.2
• /
• pp.41-52
• /
• 2018

The purpose of this study was to examine the state of oral prophylaxis practice among dental hygiene students and their awareness of musculoskeletal diseases in an effort to provide some information on how to strengthen education on treatment posture to manage musculoskeletal diseases and how to raise awareness of musculoskeletal diseases. From November 2 to 13, 2016, a self-administered survey was conducted on 653 sophomores, juniors and seniors with an experience of oral prophylaxis practice. SPSS version 20.0 for Windows was employed to analyze the collected data. The findings of the study were as follows: 1. The largest group that accounted for 37.4% responded that the total number of students undergoing oral prophylaxis practice during a semester was four to six. The biggest group that represented 65.4% answered that the required practice time per student was one to fewer than three hours. 76.0% continued to be in the repeated same posture. 2. As for the posture of patients, supine position was most common for the maxillary sinus, which accounted for 82.2%. And semi-upright position was most common for the mandibular sinus, which represented 49.6%. 3. In regard to the burden of oral prophylaxis practice, 33.9% considered the required for the practice appropriate. 42.3% took the repeated long-lasting posture, and 53.5% were under physical pressure. 55.4% suffered from mental pressure and stress. 4. The most dominant musculoskeletal area that they experienced pain after oral prophylaxis practice was neck with 52.5%; waist with 48.2, shoulders/wrists/hands with 45.5, back with 10.3, buttocks with 4.1, elbows with 2.3, legs with 2.1, ankles/feet with 0.8 and knees with 0.6%. 5. Concerning the maintenance of repeated treatment postures and pain experience, the students who continued to be in the repeated same position underwent more pain than the others who didn't on the shoulders(2.92±1.05), in the waist(3.02±1.01), buttocks(1.75±0.92), elbows(1.55±0.79) and ankles/foot(2.52±1.25). The differences were statistically significant(p<.05, p<.01). 6. As to educational experience on treatment posture and musculoskeletal diseases, 88.8% received education on treatment posture; 87.9%, on what position should be taken in times of cooperation; 46.9%, on musculoskeletal diseases; 51.9%, on carpal tunnel syndrome; 42.3%, on varicose vein. The students who replied education on occupational diseases was necessary accounted for 89.6%. 7. The students who experienced treatment posture education were better aware of the causes of musculoskeletal diseases(3.23±3.00), ways for preventing the diseases(3.33±.834) and how to stretch the body(3.63±.858). The differences were statistically significant(p<.05, p<.001). 8. The students who experienced education on occupational diseases heard more about musculoskeletal diseases(3.27±.965), were better cognizant of the causes of the diseases(3.45±.847), were better aware of how to prevent them(3.55±.805) and found themselves to know how to stretch to prevent the diseases (3.73±.826). The differences were statistically significant(p<.001).

• The Journal of the Korean bone and joint tumor society
• /
• v.11 no.2
• /
• pp.168-174
• /
• 2005

Purpose: We experienced 8 cases of osteoid osteoma arising around hip joint which had some characteristics that differ from those arising on long bone. we reports the characteristics of osteoid osteoma arising around the hip joint. Materials and Methods: 8 cases of osteoid osteoma were diagnosed during 1985 to 2004 at hanyang university hospital. all cases were comfirmed patholgically. 6 cases were male, 2 cases were female patients. The mean age was 17 years old (ranged from 8 to 29). They occurred in intertrochanteric area (4 cases), subtrochanteric area (2 cases), acetabulum (1 case) and femoral neck (1 case). We used radiologic tools including magnetic resonance image, computed tomography, bone scintigraphy. clinicopathologic test including erythrocyte sedimentation rate and Creactive protein. Results: The patients expressed various symptoms including thigh pain, knee pain, low back pain and radiating pain respectively. 2 patients had experienced operation on knee joint. 3 patients showed limping gait. Aspirin relieved the pain in 3 patients. The difference in circumference was 1cm between both thighs in 2 cases. Conclusion: Patients with osteoid osteoma arising around hip joint which have various symptoms such as severe knee pain and claudication, differ from infectious disease by clinicopathologic test including erythrocyte sedimentation rate and C- reactive protein and had better diagnostic result in computed tomography.

• Journal of Fashion Business
• /
• v.3 no.1
• /
• pp.65-80
• /
• 1999

In this study, the researcher studied the historical background and the traditional culture about dress and ornament of Yunnan Province of China. The Results of the study are as follows. 1. In the Past, Derung's dress was very simple due to the influence of various factors, such as geography and history. Men wore shorts and covered diagonally a piece of cloth from left shoulders to right armpits and tied up the two ends on chests. Women covered crisscross two pieces of cloth from both shoulders to knee. 2. Achang people's dress and adornment has its own unique characteristic. Generally, men wear Jackets with buttons down the front and black trousers. Unmarried men like to wear white turbans, while most of married men usually wear dark blue ones. Women usually wear tight-sleeve blouses with buttons down the front and skirts. Unmarried women wear the hair in braids coil them on the top of their heads. They wear short blouses and trousers. Married women wear their hair Into buns and like to entwine black or blue cloth into high trubans. They wear short blouses and knee-length straight skirts. Achang knife enjoys high reputation and has a long history and an exquisite workmanship. All the men like to wear it. 3. The dress and adornment of the Lahu nationality has both the characteristic of farming culture and the style of nomadic culture of early times. Men usually wear short shirts with round necks and buttons down the front, loose-legged trousers, turbans or dark blue cloth caps Women's dress and adornment can be categorized into two styles. One is black cloth gown with buttons diagonally on the right front and waist-length slits on both sides. The edges of fronts and cuffs are edged with Silver ornaments and lace. They also wear trousers. The other is short blouse with round neck and short opening on th right front, straight skirt and colourful leggings with embroidered patterns. 4. The Hani people, men and women, old and young, like black colour and are fond of wearing black clothes. Men usually wear shirts with buttons down the front and trousers, entwining their heads with black or white cloth. The elderly people wear calottes. Women wear cloth blouses, skirts and trousers or shorts. Slight differences exist in the clothing and adornments according to region, branch and age 5. Blang people's dyeing technique with an exquisite method has a long history. Men wear dark blue long sleeve shirts with round necks and buttons down the front or arranged diagonally on the front and loose-legged trousers. Elderly men wear big turbans wdress and adornment varies greatly in different regions. 6. The Lisu people culture of dress and adornment has some unique characteristics. The styles and colours of their dress and adornment differ slightly from place to place. In the Nujiang area, Women wear black velvet Jackets over blouses with buttons arranged diagonally on the right front and long pleated ramie skirts. Men usually wear wraparound ramie gowns, with center vent, made of fabrics alternated with white and black cross stripes. They also wear cloth waistbands and trohile youngsters keep their hair short. Women's users. In the Lushui area, the dress and adornment is similar to that in the Nujing region, but women wear aprons and trousers instead of skirts. 7. The Nu people dress and adornment is simple but elegant Women are proficient in ramie-weaving. Men usually wear gowns With overlapping necks, knee-length trousers and leggings. They like to wear their hair long and entwine dark blue or white turbans. Women wear black and red vests over blouses with buttons arranged diagonally on the right front and ankle-length skirts. They also wear their hair long, make it into braids, and entwine dark blue or colourful cloth turbans. 8. Pumi men usually wear ramie shirts With buttons arranged diagonally on the right front, loose trousers and white sheepskin vests. Some also wear overcoats made of "pulu". Women's dress and adornment varies in different areas. In the Lanping and Weixi regions, women wear white short blouses with buttons arranged diagonally on the front and dark brown embroidered vests. They also wear trousers and blue or black cloth turbans. In the Ninglang and Yongsheng regions, women wear hemmed blouses With buttons arranged diagonally on the right front and drape sheepskin capes. They also wear white pleated skirts and use broad colourful cloth as their waistbands.