• 지구물리
• /
• 제1권1호
• /
• pp.31-40
• /
• 1998

양산단층이 통과하는 안강 부근에서 기반암 분포, 지표 근처 단층과 파쇄대 위치 및 규모 등을 밝히기 위하여 중력과 총지자기를 측정하였다. 예상되는 단층의 주향과 거의 직각이 되는 2개 측선을 따라 총 67개 지점에서 15 m 간격으로 중력을 정밀하게 측정하였으며, 총지자기는 동일 측선을 따라 3 m 간격으로 총 296 점에서 측정하였다. 스펙트럼 분석법으로 구한 자기 기반암의 평균 깊이는 형산강을 중심으로 서부와 동부 측선에서 각각 8.5, 10.0 m로 계산되며, 중력 측정값은 형산강 동부가 서부보다 평균 1.71 mGal 이상 크게 나타나서 서부가 동부보다 파쇄 정도가 더욱 심한 것으로 해석된다. 중력 순산모델 연구는 동부 측선의 동쪽 끝에서 210 m 떨어진 지점에 놓인 단층을 경계로 서쪽으로 밀도 2.44 g/cm3, 깊이 70 m의 파쇄대가 발달되어 있으며, 395 m 지점을 중심으로 기반암 상부면이 폭 190 m, 평균 3.5 m 깊이의 소규모 비대칭 지구가 존재할 가능성을 제시한다. 또한 이 지구 위치의 지표 고도는 주위보다 약 44 cm 꺼져 있어서, 이 지구가 그리 오래되지 않은 시기의 단층운동에 의해 형성되었을 가능성이 높은 것으로 해석된다.

• 지구물리와물리탐사
• /
• 제11권2호
• /
• pp.137-147
• /
• 2008

2007년 1월 20일 발생한 '오대산지진(M = 4.8)'의 특징적인 점은 근거리 지역 관측소인 DGY(기상청 대관령, 진앙거리 = 7 km)에서 기록된 비정상적으로 높은 PGA(최대지반가속도) 관측값(< 0.1 g)이다. 한편 DGY 관측소는 진앙지인근에 위치한 매우 양호한 지진관측소(연관희와 서정희, 2007)로 분류되므로 지진파전달이나 부지증폭특성으로는 설명될 수 없으며, 고주파지진동에 큰 영향을 주는 지진원 특성인 단층파열방향성(rupture directivity)에 의한 것으로 예비 해석될 수 있다. 이 연구에서는 Boatwright (2007)의 방법을 이용하여 단층파열속도(v)의 전단파속도(c)에 대한 상대적 비(= v/c) 및 파열진행방향과의 이격각(${\theta}$, deviation angle)에 대한 함수로 주어지는 일방향 단층파열방향성(unilateral rupture directivity)을 추정하였다. 이러한 단층파열방향성을 평가하기 위해 진앙지 인근 지역의 지진관측소에 대한 점지진원 스펙트럼 모델(Boore, 2003)에 대한 예측오차를 오대산지진의 전 여진 관측자료을 이용하여 계산한 후, 본진 관측자료를 이용한 예측오차와 상대적으로 비교하였다. 본진의 전 여진에 대한 상대적인 스펙트럼 예측오차로부터 관측소별 PGA의 상대적인 크기를 추정하고 이 결과를 이용하여 오대산지진의 단층파열 방향성을 평가한 결과, 오대산지진 인근에서의 높은 PGA 관측값은 NWW-SEE 방향의 북측으로 고각을 갖는 단층면상에서 SE 방향을 따라 거의 수직하게 지표면으로 빠르게 진행된 단층파열의 영향으로 해석되었다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2000년도 KIASC Conference 2000 / 2000년도 학술대회 논문집
• /
• pp.139-142
• /
• 2000

We fabricated resistive superconducting fault current limiters based on $YBa_{2}Cu_{3}O_{7}$ thin films and investigated position dependence of quench progress. The $YBa_{2}Cu_{3}O_{7}$ film was coated insitu with a gold layer and patterned into 1 mm wide meander lines by photolithography. The limiters were tested with simulated fault currents. Quench progress depended significantly on the position in the limiter with respect to electrodes. The limiters quenched fastest at the part farthest from the electrodes. the limiters quenched fastest at the part farthest from the electrodes and slowest next to the electrodes. This phenomenon was more prominent near the minimum quench current. At high fault current the quench started simultaneously on all parts of the limiters and the subsequent progress of quench depended only weakly on the position. The heat transfer from limiter meander lines to electrodes explains these results.

• 대한전기학회논문지
• /
• 제40권12호
• /
• pp.1203-1210
• /
• 1991

This paper proposes a new distance relaying method based on fault initiated travelling waves for transmission line protection. The characteristics of this method are ultra high speed and excellent sensitivity. Travelling wave technique which is one of the distance relaying methods uses the discrete cross correlation function for discrimination between internal and external fault is remarkably reduced in case of a close up fault and an inception angle near or equal to zero fault. To cope with this problem, a new fast algorithm which uses backward wave summation method with fixed window is presented. The proposed method has been tested by numerical simulations using the EMTP.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.36-45
• /
• 2003

Sensitivity analyses for several seismic source models were studied. For the area sources, the hazard is steeply decreasing with the source-to-site distance. Hazard is decreasing when the area of the source is increasing with fixed annual rate. For the fault sources, the fault length, distance from a site and dip angle of near fault show very sensitive effect to seismic hazard. But the various magnitude-rupture length relationships show effect to seismic hazard slightly. For the fault source with small magnitude, the exponential model is preferred rather than the characteristic model to the magnitude-recurrence law.

• 한국안전학회지
• /
• 제27권1호
• /
• pp.44-48
• /
• 2012

The seismic safety of long-period cable-stayed bridges is assessed by probabilistic finite element analysis and reliability analysis under NFE. The structural response of critical members of cable-stayed bridges is evaluated using the developed probabilistic analysis algorithm. In this study, the real earthquake recording(Chi-Chi Earthquake; 1997) was selected as the input NFE earthquake for investigating response characteristics. The probabilistic response and reliability index shows the different aspect comparing the result from FFE earthquake. Therefore, the probabilistic seismic safety assessment on NFE earthquakes should be performed for the exact evaluation of long-period cable-stayed bridges and the earthquake resistant design criteria should be complemented.

• Structural Engineering and Mechanics
• /
• 제43권4호
• /
• pp.527-543
• /
• 2012

This paper presents a response spectrum analysis procedure suitable for base isolated regular buildings subjected to near fault ground motions. This procedure is based on the fact that the isolation system may be treated separately since the superstructure behaves as a rigid body on well selected isolation systems. The base isolated building is decomposed into several single-degree of freedom systems, the first one having the total weight of the building is isolated while the remainder when superposed they replicate approximately the behavior of the superstructure. The response of the isolation system is governed by a response spectrum generated for a single isolated mass. The concept of the procedure and its application for the analysis of base isolated structures is illustrated with an example. The present analysis procedure is shown to be accurate enough for the preliminary design and overcomes the limits of applicability of the conventional linear response spectrum analysis.

• Earthquakes and Structures
• /
• 제4권3호
• /
• pp.285-297
• /
• 2013

The effect of soil structure interaction (SSI) on seismic response of a multi-degree-of-freedom structure isolated with a friction pendulum system (FPS) is studied. In the analysis, the soil is considered as an elastic continuum and is modeled using the finite element method. The effect of SSI on response of the structure is evaluated for twenty far-field and twenty near-fault earthquake ground motions. The effect of friction coefficient of sliding material of FPS on SSI is also studied. The results of the study show that the seismic response of the structure increases for majority of the earthquake ground motions due to SSI. The sliding displacement and base shear are underestimated if SSI effects are ignored in the seismic analysis of structures isolated with FPS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.344-346
• /
• 2001

The sharing of common corridors by electric power transmission lines and pipelines is becoming more common place. However, such corridor sharing can result in undesired coupling of electromagnetic energy from the power lines to the near facilities. During a fault on any of the transmission lines, energization of the earth by supporting structures near the fault can result in large voltages appearing locally between the earth and the steel wall of any nearby pipeline. This paper presents the outline of the tower footings for the transmission lines having been used in KEPCO and analyzes the earth resistance for operation method of the tower footing, that is contact presence for the anchor and reinforcing rob of the tower and foundation presence of the underground wiring.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.3-5
• /
• 2001

When a fault occurs on distribution network. blackout region may happen, then it should be restored as fast as possible to minimize interruption of electric service. In this paper. A near optimal method to restore distribution network is proposed. For an optimal restoration, the number or switching operations must be minimized. The proposed method generates a general restoration plan for any distribution network fault and designed to reduce switching operations considering available load transfers. In this method overall process time can reduce with heuristic rules, which make a reduction of search space before restoration process. To achieve a near optimal solution, multiple load transfer algorithm is proposed too.