• Title/Summary/Keyword: near point of convergence

검색결과 81건 처리시간 0.026초

태양전지 모듈 어레이 시뮬레이션을 이용한 최대전력점 패턴분석 (Pattern Analysis of Maximum Power Point by means of Solar Cell Module Array Simulation)

  • 정지원;박인규;황국연;안태천
    • 한국지능시스템학회논문지
    • /
    • 제23권1호
    • /
    • pp.72-79
    • /
    • 2013
  • 본 논문에서는 태양광 발전시스템의 최대전력점을 추종하기 위해, 개방회로전압과 가까운 첫 번째 지역극대전력점(local peak power point)의 전압 및 전류값이 특정한 범위 내에 있을 경우, 첫 번째 지역극대점이 전역극대전력점(global peak power point)인지 판단할 수 있도록 패턴을 분석하였다. 직-병렬 어레이로 연결된 태양전지 모듈에 부분그늘문제(partial shading problem)가 발생할 경우 다수의 지역극대전력점이 관찰될 수 있어, 전역극대전력점을 찾는데 어려움이 있다. 부분선형 태양전지 모델을 이용한 태블로 해석(Tableau analysis)으로 태양전지 어레이 회로의 V-I 특성을 시뮬레이션하여 지역극대전력점과 전역극대전력점을 확인하고, 그에 해당하는 전압 및 전류 값과 V-I 특성곡선의 패턴을 분석하였다. 분석된 패턴을 통해 특정한 영역을 설정하여 첫 번째 지역극대전력점이 전역극대전력점 인지 판단하여 발전하는 경우, 첫 번째 지역극대전력점으로만 발전했을 때에 비해 효율이 향상되었다.

시지각 훈련이 사이버 멀미에 대한 융복합적 효과 (The Effect of Convergence Vision Therapy on VR Cybersickness)

  • 조형철;노효련;이희제
    • 한국융합학회논문지
    • /
    • 제13권2호
    • /
    • pp.55-65
    • /
    • 2022
  • 본 논문은 사이버 멀미 증상과 시각 기능과의 관련성을 알아보고 시지각훈련이 사이버 멀미의 증상을 감소시키는 효과가 있는지 알아보고자 하였다. 연구 대상자는 건강한 성인 남성으로, 15분 동안 동일한 가상 현실 프로그램을 체험하도록 한 이후, VR 만족도 점수와 사이버 멀미 수준에 따라 편안한 가상현실 프로그램 시청자 그룹(CVR 20명)과 불편한 가상현실 프로그램 시청자 그룹(UVR 20명)으로 분류하였다. 모든 대상자에게 시각기능 검사를 실시하였고 UVR 그룹에게 시지각 훈련 프로그램을 주 1회 40분 12회 적용한 후 시각 기능과 SSQ 설문지를 재평가하였다. 복시를 가진 대상자는 UVR 그룹에서 55%, CVR 그룹에서 5%로 나타나서 UVR 그룹에서 월등히 높았으며, 두 그룹간의 입체시, 외사위, 폭주근점(p<.01) 및 버전스 기능(p<.001)은 차이가 나타났다. 시지각 훈련 후 UVR 사용자 그룹의 SSQ, 입체시, 폭주 근점, 버전스 기능의 변화가 긍정적으로 변화하였다(p<.01). 따라서, 사이버 멀미 증상은 시각기능과 관련이 있으며, 시지각 프로그램은 사이버 멀미 증상을 완화시키는 방법으로 사용될 수 있을 것으로 보인다.

기능성 누진가입도렌즈가 대학생들의 양안시기능에 미치는 영향 비교 분석 (Comparison and Analysis for the Effects of Functional Progressive Addition Lenses on Binocular Vision of University Students)

  • 김창진;김현정;김재민
    • 한국안광학회지
    • /
    • 제15권1호
    • /
    • pp.105-116
    • /
    • 2010
  • 목적: 단초점렌즈를 착용했던 노안 이전의 젊은 사람에게 낮은 가입도로 설계된 기능성 누진가입도렌즈를 2개월 동안 교체 착용하게 하여 기존의 단초점렌즈와 기능성 누진가입도렌즈와의 임상적인 성능 차이와 양안시기능에 미치는 영향 및 개선효과를 비교 분석하였다. 방법: 안질환이 없는 평균연령 24.03${\pm}$1.87세의 대학생 32명(남자 23명, 여자 9명을 대상으로 하여 단초점렌즈와 기능성 누진가입도렌즈(EYE-T, Chcmilens Co., Korea, 가입도 0.75D)를 2개월 동안 착용하게 하였다. 이에 타각적 굴절이상도, 폭주근점, 조절근점, 조절용이성, 원 근거리 사위검사를 실시하였고, 피로감, 편안함, 불편함, 전반적인 만족도, 선호도와 관련된 항목들을 구성하여 설문조사를 하였다. 결과: 폭주근점 및 조절근점은 단초점렌즈보다 기능성 누진가입도렌즈를 착용하였을 때 가까워졌다. 조절용이성은 단초점렌즈보다 기능성 누진가입도렌즈톨 착용하였을 때 증가하였다. 사위는 원거리의 경우 단초점렌즈와 기능성 누진가입도렌즈를 착용하였을 때 비슷한 양의 외사위가 측정되었고, 근거리의 경우 기능성 누진가입도렌즈를 착용하였을 때 보다 큰 외사위가 측정되었다. 설문조사를 통한 전반적인 만족도는 착용 직후 및 작용 2개월 후 모두 근거리 관련항목에서는 단초점렌즈보다 기능성 누진가입도렌즈를 착용하였을 때 만족도가 증가하였으나, 전반적인 만족도, 적응 용이성, 신속한 적응, 원거리 관련항목 들은 단초점렌즈에서 더 만족하는 경향이 있었다. 설문조사를 통한 선호도가 큰 순서 및 착용 직후와 착용 2개월 후의 변화를 보면, 기능성 누진가입도렌즈를 착용하였을 때 근거리 작업관련이 75.00%에서 81.26%로, 시각적 피로감이 50.00%에서 65.63%로, 시각적 편안함이 47.75%에서 50.00%로, 전반적인 편안함이 31.25%에서 46.88%로 선호도가 모두 증가하는 것으로 나타났다. 결론: 단초점렌즈보다 기능성 누진가입도렌즈를 착용하였을 때 근거리와 관련된 양안시기능이 증가되었고 개선되는 것으로 나타났다. 또한 근거리 시각 활동에 관련된 자각적인 만족도와 선호도 모두 기능성 누진가입도렌즈을 착용하였을 때가 높아 오랜 시간 근업을 하는 대상자에게 유용할 것으로 사료된다.

재시동 조건을 이용한 유전자 알고리즘의 성능향상에 관한 연구 (A Study on Improvement of Genetic Algorithm Operation Using the Restarting Strategy)

  • 최정묵;이진식;임오강
    • 한국전산구조공학회논문집
    • /
    • 제15권2호
    • /
    • pp.305-313
    • /
    • 2002
  • 유전자 알고리즘은 적자 생존과 자연친화의 유전이론을 기초로 하여 이루어진 탐색기법이다. 유전자 알고리즘은 미분 정보 등과 같은 부가적인 정보없이 수렴함으로 전역적 최적값을 탐색하는 강인한 탐색기법으로 알려져 있다. 유전자 알고리즘은 연속형의 설계변수를 가지는 문제에서 세대가 계속 진행되어도 목적함수의 개선이 없이 조기에 수렴하는 경우가 있다. 또한 전역적 최적값 근처에서 수렴하지 못하고 목적함수값이 진동하여 수렴속도가 떨어지는 단점이 있다. 본 연구에서는 위와 같은 유전자 알고리즘의 단점을 보완하고자 재시동 조건과 엘리트 보존방법을 제안하였다. 수정된 유전자 알고리즘의 유용성을 검증하기 위해 3부재 트러스와 평면응력 외팔보에 적용하여 수렴 속도의 향상을 확인하였다.

지하주차장 화재 시 스프링클러헤드 작동 여부에 따른 천장 위 단열재의 발화 여부 (Ignition of ceiling insulation depending on working condition of Sprinkler head in underground parking lot fire)

  • 김서영;공하성
    • 문화기술의 융합
    • /
    • 제8권1호
    • /
    • pp.461-468
    • /
    • 2022
  • 이 논문에서는 지하주차장 화재 시 스프링클러 작동 여부에 따른 천장 위 단열재의 착화 여부에 관해 연구하였다. 스프링클러 작동 여부에 따라 동일 지점의 온도변화를 측정할 경우 시나리오 1에서는 화재와 인접한 천장부의 뿜칠재(SP-2)와 천장 단열재(발포 폴리스티렌)의 경계지점의 화재 내부온도는 658.27 ℃로 분석되었으며, 천장 단열재(발포 폴리시티렌)의 발화점인 427 ℃보다 최대 내부온도가 높아 화염이 천장 단열재에 착화되어 화재가 확산하는 것으로 나타났다. 시나리오 2에서는 화재와 인접한 천장부의 뿜칠재(SP-2)와 천장 단열재(발포 폴리스티렌)의 경계지점의 화재 내부온도는 53.10 ℃로 분석되었으며 뿜칠재(SP-2)와 천장 단열재 (발포 폴리스티렌)의 경계지점 최대 내부온도가 발화점 이하가 되어 화염이 천장 단열재에 착화되지 않았다. 이로 인해 스프링클러 작동 여부에 따라 천장 단열재의 점화 가능성을 예측할 수 있었다.

원거리사위별 그래프 분석과 표준값 결정 (Graphic Method of Visual Analysis and Norms Determination for the Far Distance Phoria)

  • 주석희;박성종;심현석
    • 한국안광학회지
    • /
    • 제11권3호
    • /
    • pp.193-200
    • /
    • 2006
  • 정시이거나 근시성 굴절이상자 83명을 대상으로 전체 표본값과 원거리 사위별 표본값 및 표본그래프를 작성하여 분석한 결과 다음과 같은 결론을 얻었다. 1. 전체 표본값은 원거리 사위량: $1.12{\Delta}$ 외사위, 근거리 사위량: $0.50{\Delta}$ 외사위, 원거리 허성상대폭주력(N.R.C.): ${\times}$/11/5, 원거리 실성상대폭주력(P.R.C.): 10/20/8, 근거리 허성상대폭주력(N.R.C.): 11/21/5, 근거리 실성상대폭주력(P.R.C.): 10/20/8, 허성상대조절력(N.R.A.): +2.54D, 실성상대조절력: -2.60D로 측정되어 모건(Morgan)의 표준값괴는 약간의 차이가 있었으며 원거리의 표본값은 증가하였고 근거리의 표본값은 감소하여 나타났다. 2. 모건(Morgan)이 분류한 A, B, C군과 데이터의 상관관계는 서로 유기적이고 밀접하게 연결되어 시기능 분석시 적극적으로 활용될 수 있다고 판정되었다. 3. 원거리 사위별 그래프 분석을 통해 쉐어드(Sheard)와 퍼시벌(Percival) 기준을 적용한 경우 원거리 사위가 외사위에는 7~9프리즘 군 이상인 경우, 내사위에는 4~6프리즘 군 이상에서 프리즘 처방이 필요하도록 나타났다.

  • PDF

실용적인 스텝크기 선택 알고리듬을 고려한 연속조류계산 시스템의 개발 (The Improvement of Continuation Power Flow System Including the Algorithm of Practical Step Length Selection)

  • 송화창;이병준;권세혁
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제48권3호
    • /
    • pp.190-196
    • /
    • 1999
  • Continuation power flow has been developed to remove the ill-condition problem caused by singularity of power flow Jacobian at and near at steady-state voltage instability point in conventional power flow. Continuation power flow consists of predictor and corrector. In prddictor, the direction vector at the resent solution is caluculated and the initial guess of next solution is determined at the distance of step length. The selection of step length is a very important part, since computational speed and convergence performance are both greatly affected by the choice of the step length. This paper presents the practical step length selection algorithm using the reactive power generation sensitivith. In numulation, the proposed algorithm is compared with step length selection algorithm using TVI(tangent vector index).

  • PDF

래티스 돔의 다분기 해석을 위한 알고리즘에 관한 연구 (A Study on the Algorithm for Multiple Bifurcation of Lattice Domes)

  • 윤한흠;이갑수;한상을
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1999년도 가을 학술발표회 논문집
    • /
    • pp.395-402
    • /
    • 1999
  • This paper discusses the theoretical researches subject to elastic buckling problems of the structures. The purpose is to ensure the characteristic of buckling be true by arc-length method and the finite element method. The difficulties in processes calculating the equilibrium curve after buckling is to get the equilibrium owe near singular point at which the determinant of stiffness matrix is zero. The purpose of the load-displacement curve is to determine the buckling load of the structure, and further to get the information about the characteristic after buckling. Here, this paper expresses the incremental solution at particular point by the linear combination of both homogeneous mode and particular mode, then uses the method which gets the unknown parameter including this function, through trial-and-error method including modified N-R convergence process. Finally, this paper describes the multiple bifurcation of truss dome as the numerical examples according to this algorithm.

  • PDF

가변의 조정변수를 갖는 복합된 1-2 단계 최적화 알고리즘 (A Unified Phase I - Phase II Semi-Infinite Constrained Optimization Algorithm with a Varying Steering Parameter)

  • Yang, Hyun-Suk
    • 전자공학회논문지B
    • /
    • 제31B권9호
    • /
    • pp.27-35
    • /
    • 1994
  • It is known that a unified phase I-phase II semi-infinite optimization algorithm with a steerign parameter performs better than the original unified phase I-phase II algorithm. In this paper, the effect of the steering parameter is analized and a new algorithm is presented based on the facts that when the point x is far away from the feasible region, reaching to the feasible region is more important than minimizing the cost functio and that when the point x is near the region, it is more efficient to try to reach the feasible region and to minimize the cost function concurrently. It is also important to consider the relationship between the feasible direction and the gradient of the cost function. Even though changing the steering parameter does not change the rate of convergence of the algorithm, it is shown from examples that given new algorithm is more efficient than the previous ones.

  • PDF

An analysis and modification of a unified phase 1-phase 2 semi-infinite constrained optimization algorithm

  • Yang, Hyun-Suk
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
    • /
    • pp.483-487
    • /
    • 1994
  • In this paper, we analize the effect of a steering water used in a unified phase I-phase II semi-infinite constrained optimization algorithm and present a new algorithm based on the facts that when the point x is far away from the feasible region where all the constraints are satisfied, reaching to the feasible region is more important than minimizing the cost function and that when the point x is near the region, it is more efficient to try to reach the feasible region and to minimize the cost function concurrently. Also, the angle between the search direction vector and the gradient of the cost function is considered when the steering parameter value is computed. Even though changing the steering parameter does not change the rate of convergence of the algorithm, we show through some examples that the proposed algorithm performs better than the other algorithms.

  • PDF