• Journal of the Korean Wood Science and Technology
• /
• v.9 no.3
• /
• pp.1-6
• /
• 1981

This study examined the radial variations in element demensions of mongolian oak (Quercus mongolica.), elm (Ulmus japonica.), maackia(Maackia amurensis.), castor aralia (Kalopanax pictus.) from pith outwards. Disks were cut from the d.b.h.(above 1.2m) of each species and specimen for tangential pore diameters, fiber length, ray height and width were taken from 1-3rd, 5th, 10th, 15th.............40th ring number from pith. The tangential pore diameters in the earlywood increased rapidly near the pith and then maintained almost constant or very gradually increased diameters in about 20th-30th ring number from pith. In the latewood, tangential pore diameters gradually increased from pith to outwards though the increment is smaller than in early wood. Radial variations of ray height and width maintained almost constant, gradually increased or rapidly increased diameters and then maintained almost constant from pith to outwards. Patterns of radial variations in the fiber length were almost coincident with patterns of earlywood pore diameters, and of ray height or width in Ulmus japonica and Maackia amurensis.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.73-80
• /
• 1993

Pinus koraiensis is one of the most important reforestation species which had widely been planted around the country. Therefore, there are great research needs on the fundamental properties of wood to extend the frequency of uses and adequate availabilities. Research results on the characteristics of anatomical wood properties and changes are summarized as follows: 1. At a horizontal direction of tree trunk, the tracheid length at outer wood gradually becomes shorter as it reaches to pith. The tracheid length having between 32 and 42 annual rings showed over 2.5 times longer than that of pith, and also its length increases from the bottom to the top of the stem. 2. The tracheid diameters in latewood showed a little fluctuations, and the shortest near to the pith in earlywood. The tracheid diameters in earlywood are more than 2 times those of latewood, and the differences between the mature and juvenile wood in earlywood are less than 10${\mu}m$. 3. The tracheid wall thickness in early wood showed a little fluctuations. On the contrary, tracheid wall thickness in latewood rapidly increases from the pith to the bark. The tracheid wall of mature wood showed 10 to 20% thicker than that of juvenile wood. 4. The fibril angle at the secondary walls of tracheid within an annual ring showed higher degree in earlywood than that of latewood. The highest tracheid fibril angle was observed at around the pith of both earlywood and latewood. Then, fibril angle slowly decreased toward outer wood, and was stabilized after 15 years. 5. Structural boundaries between mature and juvenile wood from Pinus koraiensis are divided by 13 to 19 annual ring and distance of 5 to 8cm from the pith.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.3
• /
• pp.231-240
• /
• 2018

Bamboo is one of the major biomass resources that have many advantages such as fast growing, easy cultivation, short rotation, and a relatively lower price. In this study, the anatomical characteristics of Moso bamboo (Phyllostachys pubescens) by age from one-year-old to five-year-old were examined by optical and scanning electron microscopy. Also, the crystalline properties such as relative crystallinity and crystallite width were investigated by an X-ray diffraction method. In one-year-old bamboo xylem, a few vascular bundles showed missing bundle sheath in near the intercellular space. Moreover, one-year-old bamboo had the shortest fiber length and the smallest values in vessel diameter, width of vascular bundle, and thickness of inner layer. One-year-old bamboo also showed the smallest values in the crystallinity and crystallite width. Near epidermis samples had longer fiber length and greater vascular bundle spacing than near pith samples. Relative crystallinity and crystallite width near the epidermis were also higher than near the pith. This study revealed significant differences in qualitative and quantitative anatomical characteristics between one-year-old and two-year- or more old Moso bamboos. It is concluded that the structural differences by bamboo age can be used to differentiate the characteristics of juvenile and mature bamboo.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.2
• /
• pp.191-203
• /
• 2024

Persimmon wood (Diospyros kaki) is a seasonal fruit-producing plant with a beautiful dark pattern in its wood that is suitable for high-quality furniture, sculptures and musical instruments. The utilization of persimmon wood can be improved by determining its anatomical characteristics, such as juvenile and mature wood. This study aimed to determine the boundaries between juvenile and mature wood and observe the anatomical properties of juvenile and mature wood and their variations in the axial direction. Three 30-year-old persimmon (D. kaki) trees grown in Karo, North Sumatra, Indonesia, were used in this study. The boundary between juvenile and mature wood was determined by measuring the fiber length and vessel element length from near the pith to near the bark. Anatomical observations were conducted in the juvenile and mature wood areas. The results showed that the average boundaries between juvenile and mature wood were 44.11 mm from the pith and were not significantly different in the axial direction of the trees. Furthermore, the wood anatomy categories of juvenile and mature wood differed significantly in terms of fiber diameter, fiber proportion, vessel proportion, and axial parenchyma proportion. In the axial direction, vessel diameter, ray parenchyma frequency, and ray parenchyma proportion at the base, middle, and top of the tree were significantly different.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.3
• /
• pp.45-52
• /
• 1993

Surveyed results on the slope of grain and the twist of sawn lumber of Pinus koraiensis, Larix leptolepis, and Pinus densiflora were summarized as follows: 1. The slope of grain of Pinus koraiensis has a Z-grain in the stem axis. The slope of grain was found to be the lowest at near to the pith and then constantly increased. At the height of 0.2m from the base of stem. a cross section of 35 annual rings was found to have a repeatedly increasing and decreasing slope of grain and then constantly decreased. At the height of 1.2m to 7.2m from the base of stem, the slope of grain increased conspicuously until the 10th annual ring, after which it increased near to the bark with repeatedly increasing and decreasing trends. 2. Pinus densiflora has a S-grain in the stem axis. The lowest slope of grain was found at near to the pith, and the highest in the 10 to 35 annual rings from the pith. 3. Larix leptolepis has a S-grain. At the height of 3.2m from the base of stem, the big fluctuation of the slope of grain was found without any particular trend. 4. The slope of grain and the twist between natural and reforested timber of Pinus koraiensis were found to be almost the same trend in viewpoint of the annual ring. The maximum slope of grain of imported Siberian timber of Pinus koraiensis was found at the 10 annual rings, which was quite similar to that of native species in Korea, but the big difference of the twist was found at 140 annual rings. 5. The twist was little at the mature wood of reforested Pinus koraiensis and Siberians and the duplicated part of mature and juvenile woods of those. On the contrary, the twist was great at the duplicated part of mature and juvenile woods of Pinus koraiensis. 6. The twist of Larix leptolepis showed the S-direction which coincided with that of slope of grain. The twist was greatest at the part of juvenile wood and little at the duplicated part of mature and juvenile woods, and little difference of twist was found between mature and juvenile woods. 7. Siberian larix having a minimum slope of grain showed the lowest twist, and the twist at the duplicated part of mature and juvenile woods showed a middle level of both mature and juvenile woods' portions.

• Journal of Plant Biology
• /
• v.33 no.1
• /
• pp.65-72
• /
• 1990

An anatomical study was conducted in order to elucidate the development of primary and secondary ray in Robinia pseudoacacia L. The height of primary ray near pith decreases progressively toward periphery, while the width and number per unit area gradually increase, and then the height, width and number remain somewhat constant. Secondary ray originates from the segmentation of fusiform initials or division of the side or end of fusiform initials at the middle of the first growth layer. And after the height and width of secondary ray increases to some extent, it remains constantly.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.4
• /
• pp.60-63
• /
• 1993

In the present paper, we discribed distributions patterns of pits on the tracheids of Pinus koraiensis. The number of bordered pits on a tracheid is more numerous than that of cross-field pittings. And they appeared different in the number depending on the shape and size of tracheids. Both pit and cross-field pitting on a tracheid is fewer in number near the pith. The number of bordered pits on the tracheid increased rapidly from pith toward cambial zone but that of cross-field pittings increased gradually. The number of bordered pit and corss-field pitting is more frequent in the first-formed tracheid, and the number of bordered pit decreased rapidly from earlywood to latewood but that of corss-field pittings decreased gradually. Bordered pits on a tracheid are more numerous at the end of tracheids and cross-field pittings occur more frequently in the center part of a tracheid.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.1
• /
• pp.31-63
• /
• 1991

It was proved that in conventional kiln drying of disks piling position in the kiln exerted a great influence on drying rates, and the larger the variation of disk diameter, the more undulating drying rates of disks. While in vacuum drying disks there was no influence on drying rates. By the end-wrapping treatments and the radial direction of disks tangential surface stresses in the core of disks were slightly compressive in three species. In control disks the drying stresses distributed into one step-style that compressive stresses in the pith side of 6cm from pith were larger than those in the bark side, while in the disks end-wrapped with Korean paper the drying stresses distributed uniformly, because flow rates of free water in disks had no difference between heart-and sap-wood by obstruction of evaporating water from surface of disks by end-wrapping with Korean paper. And end-wrapping with Korean paper considerably restrained those. Tangential differential shrinkage stresses developed the maximum tensile stress near the bark and with approaching the pith the stresses gradually reduced and changed into compressive stresses in near the pith. At the end of vacuum drying the maximum tangential tensile stresses of disks end-wrapped with Korean paper were smaller than those of control disks, and critical moisture contents causing the V-shaped crack of disks end-wrapped with Korean paper were lower than those of control disks because of the set by obstruction of evaporating water of end-wrapping with Korean paper. In the experiment of vacuum drying stress distribution the disks end-wrapped with Korean paper or aluminum foil in three species were free from V-shaped cracks and control disks were defected very slightly by V-shaped cracks. And also disks end-wrapped with Korean paper were free from heart checks in Alnus japonica and Juglans sinensis, and heart checks were occurred very slightly in others. Especially, not to speak of disks end-wrapped with Korean paper, vacuum drying of disks end-wrapped with aluminum foil prevented effectively drying defects, moreover drying times could be shortened, that is. Ginkgo biloba, Alnus japonica, and Juglans sinensis disks could be dried from green to in-use moisture content in 110 hours, 272 hours, and 407 hours, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.1
• /
• pp.38-46
• /
• 1982

The research was carried out to determine the division of juvenile and adult wood from the pattern of variables of wood quality indicators, to investigate general low of the size of juwenile wood and to study the characteristics of juvenile and adult wood. For this study some trees of Pinus koraiensis were selected and several wood quality indicators such as annual ring width. late wood percentage, tracheid length tracheid diameter, wall thicknes, and microfibril angles were measured. The results of this study were summaried as follows. 1) Juvenile and adult wood can be divided into radial variations of wood quality indicators. In this study juvenile wood might be classified as a large fluctuated region of radial wood quality variations in the nearest part to pith. 2) Juvenile wood was indicated as a part of nearly cylinderical shape, averaging 6-11cm in radius, near pith. 3) Number of rings from pith of juvenile wood was about 12-20 and was nearly constant in uniform growth trees among the forest stands. 4) Usually adult wood was formed within the about 5-10m above ground.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.3
• /
• pp.26-33
• /
• 1990

To study the wood quality factors of Populus nigra $\times$ maxmowiczii known a rapidly growing species, the variations of green moisture contents, bulk density, wood fibre dimensions, microfibril angles, and number of leaf knot in stem wood were investigated. The heartwood contained a higher moisture content than the corresponding sapwood. Bulk density in radial patterns variations decrease outward from the pith, then increase toward the bark. The wood-fiber length and diameters had somewhat smaller values than on Populus alba $\times$ glandulosa or Populus euramericana. The microfibril angles decreased rapidly toward the outside, and their mean values were about 16 degree. The grain angles run nearly parallel to the cell axies. Number of leaf knot showed a fluctural change above ground level to a point near the base of the crown and then increased rapidly to the top of tree and average number of leaf knot varied exclusively from tree to tree.