• 대한조선학회논문집
• /
• 제45권6호
• /
• pp.695-702
• /
• 2008

In this paper, a new numerical method is proposed to analyze near-field sonar cross section of acoustically large-sized underwater targets such as submarines. A near-field problem is converted to a far-field problem using a spherical projection method with respect to the objective target. Then, sonar cross section is calculated with a physical optics well established in far-field acoustic wave scattering problems. The analysis results of a square flat plate compared with those obtained by other method show the accuracy of the proposed method. Moreover, it is noted that the sonar cross section is varied with respect to the targeting point as well as the range. Finally, numerical analysis results of real-like underwater target such as a submarine pressure hull are discussed.

• 대한전자공학회논문지TC
• /
• 제39권11호
• /
• pp.28-33
• /
• 2002

본 논문에서는 유한 차분 시간영역 해석법을 이용하여 PCS용 임피던스 정합 모노폴 마이크로스트립 안테나를 해석하였다. FDTD 격자를 나누기 위해서 Berenger 가 제안한 완전정합층 흡수경계조건을 사용하였다. 소스 신호로 Gaussian 펄스를 사용하고, 급전부는 내부저항 전압원을 적용시켜 모델링 하였다. FDTD법은 근계 해석 기술이므로 안테나의 방사패턴과 이득을 구하기 위해서는 시간영역과 주파수영역에 모두 적용이 가능한 근계를 원계로 변환하는 것이 필요하다. 따라서 원계 방사패턴을 계산하기 위해 주파수영역 변환을 사용하였다. FDTD법에 의해 얻어진 해석 결과는 HFSS 소프트웨어를 사용한 해석 결과와 비교 분석하였으며, 만족한 결과를 얻었다.

• Journal of Radiation Protection and Research
• /
• 제23권1호
• /
• pp.1-6
• /
• 1998

영광 원전 지역에 적용될 수 있는 액체 방사성 물질의 확산 모델을 개발하였다. 영광에서의 해양 확산 조건은 매우 복잡하기 때문에 수치적 모델을 적용하는 것은 매우 어렵다. 따라서 비교적 단순하면서도 신뢰성 있는 미규제 지침 1.113에서 제시한 통계적 모델을 적용하였다. 이를 통해, 발전소 운전 조건이나, 피폭 경로에 따른 희석 인자를 계산할 수 있는 컴퓨터 코드를 개발하였다. 액체 방사성 물질의 확산에 대해서, 혼합 범위에 따라 근거리 혼합 모델과 원거리 혼합 모델로 구분하여 모델을 개발하였다. 근거리 혼합 현상은 부력과 초기 운동량 및 난류에 의해 결정된다. 원거리 혼합에서는 대기 중의 구름 확산과 유사하게 가우시안푸륨 모델을 적용할 수 있다. 서로 다른 피폭 경로에 대해 물리적으로 타당한 적분을 수행함으로서, 경로에 따른 희석 인자를 구할 수 있었다. 개발된 모델을 사용하여 계산한 결과에 의하면, 현행 영광 ODCM에 사용되는 희석 인자는 상당히 과평가되어 있음을 알 수 있다.

• 한국시뮬레이션학회논문지
• /
• 제28권2호
• /
• pp.81-88
• /
• 2019

능동배열안테나는 원전계에 있는 표적과 지형 등을 탐지/추적하기 때문에 개발 간 항공기 탑재 전 시험 수행을 위해 원전계 거리 조건을 만족하게 하는 수십 미터 이상의 지상 시험장이 필요하다. 따라서 빔 조향, 표적, 클러터 및 재밍 등의 시험 수행을 위해 지상에서 높은 곳에 실험실을 구축하는 야외 실험장을 구축하는 것이 일반적이다. 하지만 야외 실험장은 주변 지형, 날씨, 외부 신호등으로 인해 시험에 영향을 받으며, 시간/공간/비용적인 제약사항이 많다. 이러한 문제를 해결하기 위해 근전계에서 빔을 집속 시키는 이론적인 방안이 제시되었지만, 이를 실험실 환경으로 구축하기 위해서는 AESA 레이다 하드웨어의 변화를 초래한다. 본 논문에서는 관련 하드웨어와 소프트웨어의 변화 없이 AESA 레이다를 구성하는 안테나 송수신 모듈의 편차를 보정하기 위해 단일 LUT를 이용해 근전계의 빔 집속을 구현하는 기법을 제안한다. 제안한 기법은 원전계 실험 환경 및 다중 LUT를 이용한 근전계 빔 집속 구현 기법보다 실험 비용을 최소화하면서도 유사한 실험 결과를 도출할 수 있는 장점이 있다.

• Structural Engineering and Mechanics
• /
• 제86권1호
• /
• pp.29-48
• /
• 2023

Pounding happens when contiguous structures with differing heights vibrate out of line caused by a seismic activity. The situation is aggravated due to the insufficient separation gap between the structures which can lead to the crashing of the buildings or total collapse of an edifice. Countries around the world have compiled building standards to address the pounding issue. One of the strategies recommended is the introduction of the separation gap between structures. AS1170.4-2007 is an Australian standard that requires 1% of the building height as a minimum separation gap between buildings to preclude pounding. This article presents experimental and numerical tests to determine the adequacy of this specification to prevent the occurrence of seismic pounding between steel frame structures under near-field and far-field earthquakes. The results indicated that the recommended minimum separation gap based on the Australian Standard is inaccurate if low-rise structure in a coupled case is utilised under both near and far field earthquakes. The standard is adequate if a tall building is involved but only when a far-field earthquake happens. The research likewise presents results derived by using the ABS and SRSS methods.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.168-169
• /
• 2000

We have tried to enhance the density of the near-field optical memory and to improve the recording/readout speed. The current optical memory has the limitation in both density and speed. This barrier due to the far-field nature can be overcome by the use of the near-field$^{(1)}$ . The optical data storage density can be increased by reducing the size of the nanometric aperture where the near-field is obtained. To fabricate the aperture in precise dimension, we applied the orientation-dependent / anisotropic etching property of crystal Si often employed in the field of MEMS$^{(2)}$ . And so we fabricated the 10$\times$10 aperture array. This array will be also the indispensable part for speeding up. One will see the possibility of the multi-tracking pickup in the phase changing type memory through this array$^{(3)}$ . This aperture array will be expected to write the bit-mark whose size is about 100nm. We will show the recent result obtained. (omitted)

• 정보저장시스템학회논문집
• /
• 제4권1호
• /
• pp.1-5
• /
• 2008

Super-resolution near-field structure (super-RENS) technology and solid immersion lens (SIL) based near-field (NF) technology have been expected as promising approaches to increase data capacity or areal density of optical disc. Super-RENS technology has been studied until now using mainly numerical aperture (NA) of 0.85 far-field optical system and possibility of tangential data density increment have been presented. NF technology has been studied with NA over 1 and presented demonstration of removable performance. To achieve much higher density, approach to increase NA of super-RENS by NF technology (Near-Field Super-Resolution, NFSR) can be a candidate and we think this technology would be advantageous compared to wavelength reduction or much higher NA increment of NF technology or much smaller effective optical spot size reduction of far-field super-resolution technology. In this paper we present readout result of ROM media having monotone pits using NF optical system with wavelength of 405nm and NA of 1.84 surface type SIL. GeSbTe material was used for super resolution active layer and pit length is 37.5nm which is shorter than resolution limit 55nm. We present the feasibility of NFSR technology by confirming the CNR threshold according to readout power (Pr) and CNR 33dB over threshold Pr.

• 한국소음진동공학회논문집
• /
• 제24권11호
• /
• pp.907-918
• /
• 2014

In this study for the prediction of 3D underwater radiated noise pattern, a comparison between the proposed method(DHIE, Discrete Helmholtz Integral Equation) and the 3D underwater radiated noise calculation results using the measurement of near-field acoustic pressure data is performed. The near-field acoustic pressure in water is measured for the calculation of the far-field radiated noise pattern and the far-field acoustic power. Also the vibration field of the underwater structure is measured in simultaneously. Using the total far-field acoustic power and the vibration field on the surface of the structure, the proposed method(DHIE) can predict the underwater radiated noise pattern of the far-field The predicted results show the reasonable agreement within about 5dB comparing with the experiment result.

• Earthquakes and Structures
• /
• 제14권2호
• /
• pp.155-165
• /
• 2018

Methods based on nonlinear static analysis as simple tools could be used for the seismic analysis and assessment of structures. In the present study, capability of the N2 method as a well-known nonlinear analysis procedure examines for the estimation of the damage index of multi-storey reinforced concrete frames. In the implemented framework, equivalent single-degree-of-freedom (SDOF) models are utilized for the global damage estimation of multi-degree-of-freedom (MDOF) systems. This method does not require high computational analysis and subsequently decreases the required time of seismic design and assessment process. To develop the methodology, RC frames with period range from 0.4 to 2.0 s under 40 records are studied. The effectiveness of proposed technique is evaluated through numerical study under near- and far-field earthquake ground motions. Finally, the results of developed models are compared with two other simplified schemes along with nonlinear time history analysis results of multi-storey frames. To improve the accuracy of damage estimation, a modified relation is presented based on the N2 method results for near- and far-field earthquakes.

• 소음진동
• /
• 제7권1호
• /
• pp.43-53
• /
• 1997

This paper investigated the practical use for measuring the structural intensity (power flow per width of cross section) in a uniform semi-infinite beam in flexural vibration. The structural intensity is obtained as a vector at a measurement point, One-dimensional structural intensity can be obtained from 4-point cross spectral measurement, or 2-point measurement on the assumption of far field. The measurement errors due to finite difference approximation and phase mismatch of accelerometers are examined. For precise measurements, it would be better to make the value of k$\delta$(wave number x space between accelerometers) between 0.5 and 1.0. Formulation of the relation between bending waves in structures and structural intensity makes it possible to separate the wave components by which one can get a state of the vibration field. Experimental results are obtained from 2- and 4-point measurement performed at 200mm (near field) and 400mm (far field) apart from excitation point in random excitation. the results are compared with the theoretical values and measured values of input power spectrum in order to verify the accuracy of structural intensity method, 2-point method is suggested as the practical structural intensity method.