• 한국잠사곤충학회지
• /
• 제23권1호
• /
• pp.47-55
• /
• 1981

絹織物加工을 實需要者의 利用度를 增加시키기 爲해 多年間 여러 사람에 의하여 硏究되어 왔으나 天然織維이기 때문에 加工方式으로 性質을 變化시키기는 어려워서 滿足스러운 精度로 이루어지지 못하고 있는 實情에 있다. 絹織物加工은 勿論 그 缺點을 補强하는 同時에 商品的價値도 向上시키는데 目的이 있는데 때로는 有名商標가 品質以上으로 販賣를 左右하는 例도 많다. 特히 絹制品은 歡迎을 받지 못하고 있는 實情에 있다. 이러한 問題點을 解決하기 爲해 筆者는 多年間 硏究를 持績하여 왔든바 一般絹織物의 浸潤後 乾燥時間보다 半減된 時間에 乾燥되는 所謂 Wash and Wear絹加工方法의 開發을 하기에 이르렀다. 그리고 그 加工費用이 極히 經濟性인 탓으로 아무런 부담감 없이 加工處理할 수 있는 特徵을 갖이고 있었다. 1. 繭絲는 吐絲營繭曲線이 S字型으로 되어 있어 浸潤時에는 原狀復舊의 性質이 있어 屈曲狀態를 이룩하게 되어 本加工絹織物이 Wash and Wear이기는 하나 가벼운 다림질이 必要하였다. 2. 이러한 加工은 絹絲蛋白質의 變性을 加工過程에서 1% D.I.S.溶液에 3時間 處理하여 變性誘發시킴으로서 可能하였다. 3. 加工絹의 防皺度, 剛乾度를 洗濯回數를 反復하면서 調査하여 본 結果 未處理絹보다 惡化되지 않았다. 4. 未加工絹도 水洗, 乾燥를 反復하게되면 스스로 變性되는 事實을 알았다. 5. 處理絹과 未處理絹의 强力伸度面의 差異가 없었다.

• Environmental Analysis Health and Toxicology
• /
• 제18권2호
• /
• pp.95-100
• /
• 2003

본 연구는 환경호르몬(endocrine disruptors)으로 분류되었으며, 제초제로 널리 사용되었던 Dichlorodiphenyltrichloroethane(DDT)가 설치류의 생식세포 중 Leydig 세포의 testosterone(T)생성억제 및 그 관련 작용메카니즘을 규명코자 수행되었다. 먼저 흰쥐의 웅성 생식세포주인 R2C세포에 T의 양 및 aromatase 활성도를 radio immunoassay (RIA)방법을 이용하여 측정하였다. 그 결과 R2C 세포에 황체형성호르몬(LH)를 처리하여 testosterone생성을 증가시킨 후, DDT를 처리한 군들은 대조군에 비하여 농도 의존적으로 T의 양은 감소하였으며, aromatase 활성도는 증가하였다. 또한 DDT자체만 처리한 군에서도 대조군에 비하여 testosterone의 생성이 감소하였다. 이러한 aromatase활성 증가가 estradiol receptor(ER)와의 상호 관련성을 확인하기 위해 ER antagonist인 ICI 182.780를 처리한 후 T의 양 및 aromatase 활성도를 측정한 결과 DDT에 의해 증가된 aromatase활성도가 ICI 182.780에 의해 다시 감소됨을 확인하였다. 또한 DDT에 의해 감소된 T의 양도 ICI 182.780에 의해 다시 회복되었다. In vivo실험으로 흰쥐에 DDT를 직접 투여한 후 정소 내 성 호르몬들을 측정해 본 결과 T의 양은 유의성 있게 감소하였으며, estradiol(E$_2$)의 양은 증가하였으며, aromatase 활성도도 감소하였다. 이러한 결과를 종합해 볼 때 DDT는 aromatase를 감소시키고, 이렇게 감소된 aromatase에 의해 testosterone 생성량을 억제하고, 이러한 DDT의 aromatase의 감소는 ER을 경유하는 것으로 추정할 수 있다.

• 한국산업보건학회지
• /
• 제10권1호
• /
• pp.104-114
• /
• 2000

This study was carried out to estimate current status of dust concentrations in the factories producing non-metallic products in Korea. Data were gathered from the environmental monitoring reports by 40 workplace environmental monitoring institutes and the questionnaire designed for the study by the authors. A total of 1838 dust samples from 368 plants were obtained from the reports and were analyzed with no data modifications. But data on asbestos, rock wool, and welding fumes were excluded in this evaluation. The factories were classified into eight groups according to the standard industrial classification scheme in Korea. The results of this study were as follows; 1. The factories included were glass, non-refractory ceramic, refractory ceramic ware, structural non-refractory clay and ceramic, cement and lime, articles of concretes, and stone. Mean(geometric mean) concentrations of total dust samples ranged from $1.75(0.84)mg/m^3$ to $5.87(2.84)mg/m^3$. Statistically significantly higher dust concentrations were found in the cement and lime industries compared with other industries. 2. The non-compliance rates were 15.2% in glass and 20.6% in other non-metallic mineral products industries. Although all institutions surveyed utilized the identical sampling and classification scheme for dusts as specified in the current occupational exposure limits, wide discrepancies were found in collecting samples and classifying dusts. Further problems were discovered in classifying dusts. A dust sample collected could be classified into any of the three groups regardless of silica content. The results of this study showed that dust concentrations in the non-metallic products industries varied widely. Also discovered was classification errors of dust types among workplace monitoring institutes. These errors could adversely affect the results of exposure assessments and the true nature of dust hazards. Further, no institutions performed respirable dust sampling and analysis of crystalline silica. In order to correct these malpractices, current standards of occupational exposure limits should be revised and tight supervision by the Ministry of Labour be suggested.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.60-63
• /
• 2004

An innovative in-core neutron flux mapping system has been developed and applied successfully for service in a commercial pressurized water reactor. With the benefit of double indexing path selector (Dip $s^{ⓡ}$) mechanism, the reliability of the detector drive system has been improved five times higher than that of conventional systems, and the problems caused by the serious friction generated between the detector cable and guide tubing has been solved completely because the Dip $s^{ⓡ}$ architecture allows the detector guide tubings to have larger curvature and shorter length in nature. The simple and fast maintenance is particularly emphasized in the detector drive system to secure minimum radiation exposure to the maintenance personnel by optimizing the number of components and providing easy access to the components. The programmable logic controller based digital controller with Window $s^{ⓡ}$ based operator s console provides fully automated and user friendly operation and maintenance support means.

• 한국전기전자재료학회논문지
• /
• 제22권12호
• /
• pp.1014-1017
• /
• 2009

In this study, we studied the nature of thin films formed by holographic photodoping chalcogenide thin films with for use in programmable metallization cell devices(PMC), a type of ReRAM. We formatted straight conduction pathway from the internal interferences of the diffraction gratings which is builded by the holographic lithography method. We investigated the resistance change of solid-electrolyte chalcogenide thin films varied in the applied voltage bias direction from about $1\;M{\Omega}$ to several hundreds of $\Omega$. The switching characteristics of the devices applied holographic lithography method was more improved than ultraviolet exposure condition. As a result of improved resistance change effects, we can analogize that the diffraction gratings is a kind of pattern for straight conduction pathway formation inside the chalcogenide thin films.

• 지식경영연구
• /
• 제19권2호
• /
• pp.133-150
• /
• 2018

To cope with the rapid changes in the corporate environment, the creation of innovative output through various forms of collaboration have been discussed. For open collaborations, contributors who distribute to various countries and cultures are able to share knowledge via the internet without physical rewards or responsibilities. In this study, we focused on the open source software project, which is a representative open collaboration. We investigated the factors that affect the knowledge contribution of developers of various countries within the open collaboration platform. Specifically, we investigated the open collaborative nature of multi-culture developers by dividing cultures according to collectivism and individualism. We collected data on 26,604 developers using a python based web crawler for GitHub which is an open source software development platform, and conducted cross-cultural study. This paper contributes to the field of knowledge management by suggesting various impacts of antecedents such as hireability, and information exposure on knowledge sharing according to culture.

• Asian Journal of Business Environment
• /
• 제6권1호
• /
• pp.25-30
• /
• 2016

Purpose - The study aims to examine the students' perspective (stream wise) of parameters affecting the undergraduate engineering education system present in a private technical institution in NCR, Haryana, India. Research design, data, and methodology - It is a descriptive type of research in nature. Questionnaire Based Survey has been used to collect the data. The sample size for the study is 500 comprising of the students respondents. The sample has been taken randomly and the questionnaire was filled by the students (pursuing B. Tech) chosen on the random basis from a private technical educational institution in NCR, Haryana, India. For data analysis and conclusion of the results of the survey, statistical tool like F test was performed with the help of high quality software; SPSS. Conclusion - Analysis of variance revealed statistically no difference between the mean number of the groups (stream wise) for the parameters "Selection", "Academic Excellence", "Infrastructure", "Personality Development and Industry Exposure" and "Management and Administration". While Analysis of variance revealed statistically difference between the mean numbers of the groups for the parameter "Placements".

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.73-76
• /
• 2006

Sewage facilities mainly consisted of concrete structures are being deteriorated seriously by biodeterioration originated from sulfur-oxidizing bacteria. To prevent biochemical corrosion of the sewage concrete, antibiotics which prevent growth of sulfur-oxidizing bacteria were developed. Recently, to evaluate biochemical corrosion properties of concrete, antimicrobial performance and resistance to sulfuric acid were investigated respectively. But, in this study, to evaluate it complexly, concrete specimen covered with antibiotics were exposed in the actual sewage environment and were investigated about corrosion properties after three months. As a result, weight change ratio, nature potential and sulfuric ratio of concrete covered with antibiotics were less than plain concrete.

• 한국식품영양과학회지
• /
• 제30권3호
• /
• pp.410-414
• /
• 2001

A new bacteriocin produced by Bacillus licheniformis cy2 was partially purified and characterized. The bacteriocin named as BSCY2 was stable in the pH range of 2.5~9.5. BSCY2 was stable below 4$0^{\circ}C$ and it retained its antimicrobial activity during long tern storage at -2$0^{\circ}C$ and -7$0^{\circ}C$. BSCY2 was inactivated 15 min exposure to temperatures over 8$0^{\circ}C$ and lost 50% of its antimicrobial activity within 2 hr at 7$0^{\circ}C$. BSCY2 was inactivated by proteinase K treatment, which indicates its proteinous nature. Direct detection of the BSCY2 band showing antimicobial activity on Tricine-SDS-PAGE suggested an apparent molecular mass of about 6,500 dalton. These characterizatics of BSCY2 are considered as potential compounds for use in bioindustry.

• 한국지역사회생활과학회지
• /
• 제15권1호
• /
• pp.27-33
• /
• 2004

Natural dyeing means coloring with dyes extracted from plants, minerals or animals found in nature. Natural dyeing provides calm and natural colors; it has antibacterial and deodorizing qualities; and the dyeing process is environmentally friendly. This study extracted natural dyes from young fruit by thinning out the superfluous fruits of Naju pear trees, and then examined its dyeing properties, the optimal dyeing conditions, and its color fastness for practical use. The results indicated that dyeing is ideal when it had Cu mordant treatment (5% concentration at 9$0^{\circ}C$, pH 4) for 50 min. The color fastness of natural dyes with Cu mordant treatment was very excellent after rubbing and dry cleaning, and also good after exposure to perspiration, light and washing.