• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.4
• /
• pp.181-190
• /
• 2004

The interest of the fatigue life of rubber components such as engine mounts is increasing according to the extension of warranty period of the automotive components. Automotive engine mounts get damaged due to thermal and mechanical loadings. This paper discusses a fatigue life prediction of the 3-dimensional dumbbell specimens for natural rubber compound considering the effects of maximum strain and heat aging temperature. Displacement controlled fatigue life tests were performed using specimens with different levels of maximum strain and various hardness. The basic mechanical properties test and the fatigue test of aged rubber specimen under normal and elevated temperature were executed. A procedure to predicted the fatigue life of vulcanized natural rubber material based on the maximum strain method was proposed, and then this curve was in good agreement with fatigue test data less than 200% error range.

• Elastomers and Composites
• /
• v.57 no.4
• /
• pp.188-196
• /
• 2022

Styrene-butadiene rubber(SBR) is a copolymer of styrene and butadiene. It is composed of 1,2-unit, 1,4-unit, and styrene, and its properties are dependent on its microstructure. In general, rubber composites contain a single rubber or a blended rubber. Similarly, SBR is used by mixing with natural rubber(NR) and butadiene rubber(BR). The composition of a rubber article affects its physical and chemical properties. Herein, an analytical method for determining the microstructure of SBR using via pyrolysis is introduced. Pyrolysis-gas chromatography/mass spectrometry is widely used to analyze the microstructure of polymeric materials. The microstructure of SBR can be determined by analyzing the principal pyrolysis products formed from SBR, such as 4-vinylcyclohexene, styrene, 2-phenylpropene, 3-phenylcyclopentene, and 4-phenylcyclohexene. An analytical method for determining the composition of SBR/NR, SBR/BR, and SBR/NR/BR blends via pyrolysis is introduced. The composition of blended rubber can be determined by analyzing the principal pyrolysis products formed from each rubber component.

• Elastomers and Composites
• /
• v.56 no.4
• /
• pp.201-208
• /
• 2021

In this study, the effect of petroleum resin on the mechanical strength, morphology, and vibration damping characteristics of natural rubber (NR) composites was observed. The NR composites plasticized by adding petroleum resin showed decreased hardness and mechanical properties. A morphology analysis indicated that as the amount of petroleum resin increased, carbon black aggregates (or agglomerates) observed at the fracture surface decreased, resulting in an improvement in the dispersibility. In addition, as 20 phr of petroleum resin was added, the effective damping temperature range increased by approximately 11.4%, the hysteresis loss rate increased by 15.2%, and the resilience decreased by 36.6%. Therefore, it was confirmed that the vibration damping characteristics improved with the addition of petroleum resin. This was because the rubber-filler interaction between the NR molecular chain of the NR composite and the carbon black particles improved by the addition of petroleum resin.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.223-224
• /
• 2002

The mechanisms of formation of transfer film under the condition of wear of Steel AISI1020 by natural rubber were investigated. The transfer film was observed and the formation mechanisms were clarified. The formation process of transfer film on the worn surface of the steel could be divided into two stages. Firstly, the adhesive layer emerged on the worn surface of the steel by adhesion of natural rubber. in which the macromolecular chains of natural rubber joined to the surface of the steel by Van der Waals' force. And then, the iron atom and metal oxide reacted with the macromolecular of natural rubber in the adhesive layer and produced Fe-polymer compound. As a result, the transfer film was formed on the worn surface of the steel. The transfer film was joined to the worn surface of the steel by the chemical bonds and electrostatic force.

• Journal of Environmental Science International
• /
• v.19 no.3
• /
• pp.365-370
• /
• 2010

In this study, we carried out the evaluation of EPDM(Ethylene Propylene Diene Monomer) reclaimed rubber mixing with natural rubber at various mixing ratio to reuse as rubber filler. The scorch time and moony viscosity was analyzed to evaluate the effect of cure behavior. And also, we analyzed the tensile strength, the elongation at break and cure time to evaluate the variation of cure behavior. As the results, the scorch time and optimal cure time was decreased according to the increasing of EPDM reclaimed rubber. However, the moony viscosity was increased at each mixing ratio. In case of the added EPDM reclaimed rubber was 20 phr(parts by weight per 100 parts by weight of rubber), the hardness and specific gravity was increased a little. The hardness and specific gravity was increased in rapidly under 40 phr of the added EPEM reclaimed rubber. The tensile strength and elongation at break of the compound of natural and EPDM reclaimed rubber was rapidly decreased compared with its natural rubber when the ratio of adding EPDM reclaimed rubber was over 40 phr.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.17 no.3
• /
• pp.117-125
• /
• 2013

Seismic isolation has been considered and utilized in various industries as a way to prevent huge damage on to structures by large earthquakes in various industries. The laminated Laminated rubber bearings is are most frequently used in seismic isolation systems. The structural Structural safety could not be assured unless the performance of the rubber bearing is not guaranteed for the life time of the structure under the consideration that the bearing is a critical structural member to sustain vertical loads in the seismically isolated structure. However, there are few studies on the deterioration problems of rubber bearings during their service life. The long term performance of the rubber bearings was not considered in past designs of seismically isolated structures. This study evaluates the long term performance and creep characteristics of laminated natural rubber bearings that are used in seismically isolated buildings. For the this study, a set of accelerated thermal aging tests and creep tests are were performed on real specimens. The experimental results show that the natural rubber bearings would have a stable change rate of change for durability under severe environmental conditions for a long time.

• Elastomers and Composites
• /
• v.55 no.3
• /
• pp.199-204
• /
• 2020

Considering the immense applicability of isoprene rubbers, such as natural rubber (NR) and synthetic polyisoprene rubber (IR), attempts are being made to introduce more functionality within the rubber structure, e.g. epoxidation, to widen their technological viability. Epoxidation introduces polar epoxy bonds into the rubber molecular chain, resulting in enhanced intermolecular interactions among the rubber chains, increasing the oil resistance and air impermeability. Although there have been many reports on the epoxidation of NR in its latex form, there has been no such report using its solid form (or gum), which limits the epoxidation in terms of portability. Furthermore, the gum form has longer lifetime, while the latex form has limited lifetime for its efficient use. In this study, the epoxidation of natural rubber and polyisoprene rubber (using meta-chloroperoxybenzoic acid (mCPBA) as the epoxidizing agent) by dissolving their gum in hexane (i.e., the solution method) have been studied and compared. The effects of the amount of mCPBA, reaction time, and reaction temperature were investigated. The present process is easy and facilitates the epoxidation of rubbers in their solid form; therefore, it can be used for industrial upscaling of epoxidized rubber production.

• Advances in materials Research
• /
• v.3 no.3
• /
• pp.175-183
• /
• 2014

Natural rubber bound phenolic antioxidant, 2,6-di-tert-butyl-4-vinylphenol (2,6-DBVP), was prepared from natural rubber and 2,6-DBVP in both solution and melt state. The 2,6-DBVP had been synthesized from 3,5-di-tert-butyl-4-hydroxybenzaldehyde and methyltriphenylphosphonium iodide ($MePPh_3I$) by Wittig reaction ($0^{\circ}C$ for 2 hrs, $N_2$ atmosphere). The conditions for preparation of natural rubber bound 2,6-DBVP (NR-DBVP) were optimized for both solution state (1 phr BPO and 8 phr 2,6-DBVP at $70^{\circ}C$ for 2 hrs) and for melt state (1 phr BPO and 8 phr 2,6-DBVP at $70^{\circ}C$ for 10 mins, with rotor speed of 60 rpm). A thermoplastic vulcanizate was obtained using a compatibilizer, polypropylene modified with phenolic resin (PhHRJ-PP), in a closed mixer ($180^{\circ}C$ for 3 mins, rotor speed 60 rpm). The antioxidant properties of vulcanized NR-DBVP, using phenolic as the vulcanization system, were similar to NR with the conventional antioxidant BHT. In addition, the antioxidant, water leaching property of the thermoplastic vulcanizate of NR-DBVP/PP were good in comparison to a NR blend with BHT; the morphologies of these thermoplastic vulcanizates were similar.

• Journal of Forest and Environmental Science
• /
• v.38 no.2
• /
• pp.75-89
• /
• 2022

The negative impact of monoculture rubber plantations on biodiversity and associated ecological processes/ecosystem services has led to suggestions on the use of integrated land use systems for rubber cultivation and production in order to ensure environmental sustainability. However, there is paucity of information on the effect of such integrated land use systems on the diversity and abundance of the rubber plantation undergrowth. We evaluated and compared undergrowth plant species composition, richness, abundance, diversity and interaction, in three integrated systems (Rubber-Strelitzia reginae Integrated System - RSrIS, Rubber-Podocarpus nagi Integrated System - RPnIS & Naturally Managed Rubber Plantation - NMRP) with three Rubber Monoculture Plantations (RMP₁, RMP₂ & RMP₃) adjacent to the integrated systems, respectively, at the Investigation and Experiment Station of Tropical Crops, Danzhou, Hainan, China. Undergrowth species density was higher in the rubber monocultures than in the integrated systems except in RSrIS. Species richness and diversity were also higher in the monocultures except in NMRP. Species similarity/interaction between the monocultures and the integrated systems was highest between RMP₃ and NMRP. The NRMP proved to be the best model of natural rubber integrated system for the conservation of undergrowth species richness, diversity and interspecific interaction. However, the conservation of undergrowth species in other forms of integrated natural systems can be enhanced by considering the ecology of species to be integrated in terms of their growth characteristics, competitive nature, and ability to grow in association with other species.

• Elastomers and Composites
• /
• v.34 no.3
• /
• pp.262-268
• /
• 1999

Effect of carbon blacks (CBs) on the stress relaxation and the elastic recovery of uncrosslinked natural rubber (NR) was examined. It was found that if the type of CB is characterized by smaller size and higher structure, the stress relaxation is more delayed and the elastic recovery becomes more active. These results are attributed to the degree of bound rubber, i.e., the interaction between NR and CB.