• 대한토목학회논문집
• /
• 제31권3A호
• /
• pp.251-260
• /
• 2011

본 연구는 천연마섬유보강 시멘트 경화체와 폴리올레핀계 매크로섬유의 부착강도, 계면인성, 미세구조 분석을 포함한 부착 특성에 미치는 천연마섬유의 효과를 제시하였다. 다양한 조건에서의 폴리올레핀계 매크로섬유 인발시험의 실험적 결과를 보고하였다. 천연마섬유의 혼입률은 0.1%에서 0.2%까지를 배합설계에 적용하였다. 부착시험은 천연마섬유보강 시멘트 경화체에서 폴리올레핀계 매크로섬유의 부착특성을 측정하기 위하여 실시하였다. 시험결과 천연마섬유의 혼입은 폴리올레핀계 매크로섬유와 시멘트 경화체의 계면강화에 효과적이었다. 폴리올레핀계 매크로섬유와 천연마섬유보강 시멘트 경화체의 부착강도 및 계면인성은 섬유의 혼입률이 증가할수록 증가하였다. 미세구조분석은 섬유의 인발시험결과로부터 획득한 부착 메커니즘을 확인할 수 있었다.

• Computers and Concrete
• /
• 제11권6호
• /
• pp.531-539
• /
• 2013

An experimental investigation of mechanical properties of jute fiber-reinforced concrete (JFRC) has been reported for making a suitable construction material in terms of fiber reinforcement. Two jute fiber reinforced concretes, called jute fiber reinforced normal strength concrete (JFRNSC) and jute fiber-reinforced high-fluidity concrete (JFRHFC), were tested in compression, flexure and splitting tension. Compressive, flexural and splitting tensile strengths of specimens were investigated to four levels of jute fiber contents by volume fraction. From the test results, Jute fiber can be successfully used for normal strength concrete (NSC) and high-fluidity concrete (HFC). Particularly, HFC with jute fibers shows relatively higher improvement of strength property than that of normal strength concrete.

• 한국농공학회논문집
• /
• 제57권2호
• /
• pp.67-73
• /
• 2015

This study evaluated the effects of fibers on the void ratio, compressive strength and repeated freezing and thawing resistance of porous vegetation concrete with binder type (non-sintering inorganic binder and blast furnace slag cement) and natural jute fiber volume fraction (0.0 %, 0.1 % and 0.2 %). The natural jute fiber volume fraction affected the void ratio, compressive strength and repeated freezing and thawing resistance. Added of natural jute fiber resulted in improved properties of the void ratio, compressive strength and freezing and thawing resistance. Also, the both compressive strength and freezing and thawing resistance increased with natural jute fiber volume fraction up to 0.1 % and then decreased with fiber volume fraction at 0.2 %.

• Advanced Composite Materials
• /
• 제18권3호
• /
• pp.197-208
• /
• 2009

Changes occurring in jute and coir fiber composites with 2-8% concentration of a NaOH treatment for 24 h were investigated, respectively, for void content, microscopy images, mechanical properties and water absorption. The jute and coir fibers were vacuum dried before molding composite specimens. Mechanical properties indicated good adhesion between natural fibers and PP. Jute fibers, when alkali-treated with 2% concentration for 24 h, showed best improvement in tensile strength by 40% and modulus by 9%, respectively, while coir fibers, when alkali-treated with 6% concentration for 24 h, showed best improvement in tensile strengths by 62% and modulus by 17%, respectively. With 2% concentration of alkali-treatments, the elongation of jute and coir composites reached 8% and 13.5%, respectively. Moisture absorption for jute and coir composites are 50% and 60% lower than untreated fiber composites, respectively.

• 한국농공학회논문집
• /
• 제55권4호
• /
• pp.29-35
• /
• 2013

The objective of the current study is to evaluate the effects depending on the types of reinforcing fibers being influential in view of mechanical properties and impact resistance of hybrid fiber reinforced concrete (HFRC) for applications to precast concrete structure. Hybrid fibers applied therefor were three types such as PP/MSF (polypropylene fiber+macro synthetic fiber), PVA/MAF (polyvinyl alcohol fiber+MSF) and JUTE/MSF (natural jute fiber+MSF), where the volume fraction of PP, PVA and natural jute was applied with 0.2 %, respectively, while based on 0.05 % volume fraction of MSF. The HFRC was tested for slump, compressive strength, flexural strength and impact resistance. The test result demonstrated that mixture of such hybrid fibers improve compressive strength, flexural strength and impact resistance of concrete. Moreover, it was found that HFRCs to which hydrophilic fibers, i.e. PVA/MSF and JUTE/MSF, were mixed show more improved features that HFRC to which non-hydrophilic fiber, i.e. PP/MSF was mixed. Meanwhile, the finding that PVA/MSF HFRC exhibited better performance than JUTE/MSF HFRC was attributed from the former having higher aspect ratio than that of the latter.

• 한국조경학회지
• /
• 제28권1호
• /
• pp.54-61
• /
• 2000

Covering rate, visual rating and sod development were evaluated under three natural fiber materials with Phragmites spp. when over a plastic sheet. The results were as follows. (1) The last covering rate was high on jute net, coir mat and on Miscanthus sacchariflorus, respectively while the early covering rate was high on coir mat and on Miscanthus sinensis+perennial ryegrass. (2) The early growth was good on perennial ryegrass but the covering rate gradually turned poor because of summer drought. (3) Sod was highly developed on Phragmites japonica, Miscanthus sacchariflorus and Miscanthus sinensis compared with other species and mixtures. (4) The covering rate and visual rating were high on natural fiber materials such as coir mat and jute net when compared with on natural fiber materials such as none treatment plots. (5) The natural fibers materials on Phragmites spp. and Miscanthus spp. were effect on sod establishment. Sod coir mat was highly established. (6) The carpet-type sod was best developed on the coir mat.

• 한국기계가공학회지
• /
• 제18권12호
• /
• pp.28-37
• /
• 2019

Due to their flexible tailoring qualities, composites have become fascinating materials for structural engineers. While the research area of fiber-reinforced composite materials was previously limited to synthetic materials, natural fibers have recently become the primary research focus as the best alternative to artificial fibers. The natural fibers are eco-friendly and relatively cheaper than synthetic fibers. The main concern of current research into natural fiber-reinforced composites is the prediction and enhancement of the effective material properties. In the present work, finite element analysis is used with a numerical homogenization approach to determine the effective material properties of jute fiber-reinforced epoxy composites with various volume fractions of fiber. The finite element analysis results for the jute fiber-reinforced epoxy composite are then compared with several well-known analytical models.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.111-115
• /
• 2005

Recently, natural fibers draw much interests in composite industry due to low cost, light weight, and environment-friendly characteristics compared with glass fibers. In this study, mechanical properties were evaluated for two extreme cases of jute fiber orientations, i.e. the unidirectional yarn composites and the felt fabric composites. Samples of jute fiber composites were fabricated by RTM process using epoxy resin, and tensile, compression, and shear tests were conducted. As can be expected, unidirectional fiber specimens in longitudinal direction showed the highest strength and modulus. Compared with glass/epoxy composites of the similar fabric architecture and fiber volume fraction, the tensile strength and modulus of jute felt/epoxy composites reached only 40% and 50% levels. However, the specific tensile strength and modulus increased to 80% and 90% of the glass/epoxy composites. The main reason for the poor mechanical properties of jute composites is associated with the weak interfacial bonding between fiber and matrix. The effect of surface treatment of jute fibers on the interfacial bonding will be examined in the future work.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.116-120
• /
• 2005

In this study, composites with polypropylene(PP) and Jute fiber were prepared by compression molding technique. Generally, hydrophilic jute fibers do not adhere well to PP, which is hydrophobic. Maleic anhydride grafted polypropylene(MAPP) had been widely used as a coupling agent to improve the bonding between ligno-cellulosic fibers and PP. The coupling agent improved the tensile and flexural properties when the mechanical properties were tested by using a UTM. The mechanical properties of natural fiber composites(NFCs) by modified thermoplastics were higher than those of NFCs by unmodified thermoplastics. Fracture surfaces of the composites and the fiber orientations were investigated by scanning electron microscopy. The mechanical performance of NFCs by modified thermoplastics appeared to be improved by the enhanced interface adhesion between the fiber and the matrix.

• 접착 및 계면
• /
• 제7권2호
• /
• pp.1-11
• /
• 2006

미처리 Jute와 Hemp섬유와 처리된 Jute와 Hemp섬유가 강화된 polypropylene-maleic anhydride-g-polypropylene copolymer (PP-MAPP) 복합재료의 계면 물성을 미세역학시험법과 동적접촉각 측정을 통해서 평가하였다. Jute와 Hemp섬유의 통계적인 인장강도의 경우 두 형태 와이블 분포가 단일 형태 분포보다 더 일치하는 것을 확인할 수 있었다. 천연섬유 복합재료의 계면전단강도(IFSS)에 대한 산-염기 상호작용변수는 접착일($W_a$)의 계산을 통해 그 특성을 기술 할 수 있다. 천연섬유에 대한 알칼리, 실란커플링제의 영향은 PP-MAPP 기지재의 MAPP 함량을 변화시킴으로써 얻을 수 있었다. 알칼리 처리된 Jute와 Hemp섬유의 경우 약한 계면층이 모두 제거되고 표면적이 증가됨으로 인해 표면에너지는 더 증가하였다. 반면 실란 커플링제를 이용하여 표면 처리된 Jute와 Hemp 섬유의 경우 차단된 높은 에너지의 기들로 인해 표면에너지는 감소하였다. PP-MAPP기지재속의 MAPP의 함량증가는 산-염기 기의 도입으로 인해 표면에너지는 증가하였다. 두 천연섬유 복합재료의 미세파괴 형상은 두 섬유의 인장강도가 다르기 때문에 명확히 구분되었다.