• Elastomers and Composites
• /
• v.29 no.1
• /
• pp.9-17
• /
• 1994

Methylmetharylate grafted latex(MGL) was prepared by emulsion graft copolymerization of methyl methacrylate onto natural rubber latex(NRL) by using t-butyl hydroperoxide and tetraethylene pentamine in an aqueous medium. Blending of MGL and NRL with different mixing ratio carried out and viscosity and particle size distribution of blend latex were determined. It was found that the optimum condition of mature time, vulcanizing temperature and time for preparation of blend latex films were investigated. latex films prepared by dipping process were meaured. As the reuslt, blend latex(NR-d-MG) films obtained from two-dipping system were more excellent than NR and MG film obtained from one-dipping system.

• Journal of Food Hygiene and Safety
• /
• v.14 no.1
• /
• pp.90-96
• /
• 1999

Biodegradable films were prepared by solution blending method in the weight ratio of Chitosan and Algin for the purpose of useful bioimplants. The possibility of bioimplants, which prepared from natural polymers as a skin substitute and food wrapping materials were evaluated by measuring the biodegradability. these biodegradable films were inserted in the back of rats and their biodegradability was investigated by hematological change as a function of time. Rats study showed that low-Chitosan induced increments of monocyte and basophil after 48 hours of implantation. And medium-Chitosan showed increase of lymphocyte and decreased neutrophil counts after 48 hours of implantation. Low, medium Chitosan showed high hemoglobin contents, medium and high Chitosan showed high hematocrit value after 48 hours of implantation. As a result, medium, high-Chitosan induced potential incompatibility in the tissue after 48 hours, but there was little effects to the skin inflammation. The values of biodegradable films, which prepared from natural polymers measured in this study were some satisfiable results at short period with those of ideal skin bioimplants and artificial skin.

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.21-26
• /
• 1996

Commercially available Chines oriental lacquer was treated to get two fractions, hexane soluble fraction and hexane insoluble fraction. Hexane soluble fraction was subjected to thermal curing process. Films obtained from the lacquer under normal conditions and obtained from thermal curing were compared. The compounds in hexane soluble fraction were copolymerized with 1,6-diisocyanohexane, and toluendiisocyanate(TDI). Films obtained by thermal curing were highly brittle and hydrophobic while the films obtained under normal conditions were hydrophilic. Curing reaction did not occur when oxygen was not available.Some of the major component in the lacquer was isolated by HPLC and UV spectrum of each compound was recorded.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.1
• /
• pp.41-46
• /
• 2009

The low dielectric SiOCH films were deposited on p-type Si(100) substrates through the dissociation of BTMSM $(((CH_3)_3Si)_2CH_2)$ precursors with oxygen gas by using PECVD method. BTMSM precursor was introduced with the flow rates from 42 to 60 sccm by 2 sccm step into reaction chamber but with the constant flow rate of 60 sccm $O_2$. SiOCH thin films were annealed at $450^{\circ}C$ for 30 minutes. The electrical property of SiOCH thin films was studied by MIS, Al/SiOCH/p-Si(100), structure. Annealed samples showed large reduction of the maximum capacitance yielding low dielectric constant owing to reductions of surface charge density. After exposure at room temperature and atmospheric pressure, dielectric constant of SiOCH films was totally increased. However, annealed SiOCH thin films were more stable than as-deposited SiOCH thin films for natural oxidation.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.2
• /
• pp.125-129
• /
• 2016

Anodizing is a technology to generate thicker and high-quality films than natural oxide films by treating metals via electrochemical methods. Electrochemical manufacturing method of nano structure is an efficient technology in terms of cost reduction, high productivity and complicated shapes, which receives the spotlight in diverse areas. Especially, artificial films generated by anodizing technology possess excellent mechanical characteristics including hardness and wear resistance. It is also easy to modify thickness and adjust shape of those artificial films so that they are mainly used in sensors, filters, optical films and electrolytic condensers. In this study, experiment was performed to observe the effect of current density on porous film formation in two-step anodizing for Al alloy. Anodizing process was performed with 10 vol.% sulfuric acid electrolyte while the temperature was maintained at $10^{\circ}C$ using a double beaker. and $10{\sim}30mA/cm^2$ was applied for 40 minutes using a galvanostatic method. As a result, both pore diameters and distances between pores tended to increase as the local temperature and electrolysis activity increased due to the increase in applied current density.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.703-708
• /
• 1996

Humidity sensing cheracterisrics of vacuum deposited plasma poly merized $YbPc_2$ films were evaluated. In both films, humidity caused an increase of pro-ton conduction. Polymerised film shows a threshold fo humidity increase and its sensitivity diminishes more than $38^{\circ}C$ of relative humidity. Furthermore, for the polymerized film, two min. of resssponse time and 1 min. of recovery time are also obtained. The sensitivity between 10% and 85% of relative hum-idities is found to be one hundred higher than that of the vacuum deposited film.

• Journal of Korean Vacuum Science & Technology
• /
• v.5 no.2
• /
• pp.33-37
• /
• 2001

We measured x-ray magnetic circular dichroism of Co films on Pd(111) surface with and without Pd capping layer at the Co L$_2$,$_3$ edges. Perpendicular magnetization and orbital-moment enhancement are induced by the capping layer. The increase of perpendicular magnetic anisotropy induced by capping layer is considered to result from the increase of surface anisotropy due to the hybridization at the surface.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.11a
• /
• pp.66-66
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• v.15 no.3
• /
• pp.190-191
• /
• 1994

• Journal of Information Display
• /
• v.4 no.1
• /
• pp.17-23
• /
• 2003

A thermoset type anisotropic conductive adhesive film (ACAF) comprising epoxy resin and natural butyl rubber (NBR) as the binder, micro-encapsulated imidazole as the curing agent, and Ni/Au coated polymer bead as a conductive particle has been studied. These films have been prepared to respond to requirements such as improved contact resistance, current status less of than 60 ${\mu}m$ and reliability. These films can also be used for connection between the ITO glass for LCD panel and the flexible circuit board. The curing conditions for the connection were 40, 20 and 15 seconds at 150, 170 and 190 $^{\circ}C$, respectively. The initial contact resistance and adhesion strength were 0.5 ${\Omega}/square$ and 0.4 kg/cm under the condition of 30 kgf/$^{cm}^2}$, respectively. After completing one thousand thermal shock cycling tests between -15 $^{\circ}C$ and 100 $^{\circ}C$, the contact resistance was maintained below 0.7 ${\Omega}/square$. Durability against high temperature (80$^{\circ}C$) and high humidity (85 % RH) was also tested to confirm long-term stability (1000 hrs) of the conduction.