• Korean Management Science Review
• /
• v.25 no.3
• /
• pp.27-43
• /
• 2008

This study analyzes the changes of Gyeongju local society because of setting up low and intermediate level radioactive waste disposal site by using urban dynamics model. Specifically, after examining 'Gyeongju Long-Term Development Plan' announced in 2007, I establish the number of industries, population, gross local product, residents' income, and the long term employment condition as essential change-causing factors in Gyeongju local society based on the Big3 government project, and forecast it by using 'Gyeongju long-Term Development Plan' and all sorts of statistical data. In this stage, I assume 3 scenarios(basic, optimistic, and pessimistic view) to estimate the changes of local society more exquisitely, and scenarios are composed through mediation about variables of a growth rate and an inflow or outflow rate. The result shows that Gyeonaju local society would have growing changes by 2020. The essential change-causing factors are as follows. The case of population is estimated that it starts going down at the level of approximately 270 thousand by 2009, starts going up continuously after 2009, the year of completion of low and intermediate level radioactive waste disposal site, and increases from the level of about 300 thousand as minimum to 340 thousand as maximum in 2020. The estimates of other cases are made that the number of Industries has about 10 thousand increases, gross local product has almost 6 trillion increases, nominal gross national income doubles, as well as residences have approximately 280 thousand increases, and also made that employment condition also improves continuously, and diffusion ratio of house starts going up but the amount of supplies is a little bit insufficient in the long view.

• Restorative Dentistry and Endodontics
• /
• v.37 no.4
• /
• pp.215-219
• /
• 2012

Objectives: The purpose of this study was to investigate the screw-in effect and torque generation depending on the size of glide path during root canal preparation. Materials and Methods: Forty Endo-Training Blocks (REF A 0177, Dentsply Maillefer) were used. They were divided into 4 groups. For groups 1, 2, 3, and 4, the glide path was established with ISO #13 Path File (Dentsply Maillefer), #15 NiTi K-file NITIFLEX (Dentsply Maillefer), modified #16 Path File (equivalent to #18), and #20 NiTi K-file NITIFLEX, respectively. The screw-in force and resultant torque were measured using a custom-made experimental apparatus while canals were instrumented with ProTaper S1 (Dentsply Maillefer) at a constant speed of 300 rpm with an automated pecking motion. A statistical analysis was performed using one-way analysis of variance and the Duncan post hoc comparison test. Results: Group 4 showed lowest screw-in effect ($2.796{\pm}0.134$) among the groups (p < 0.05). Torque was inversely proportional to the glide path of each group. In #20 glide path group, the screw-in effect and torque decreased at the last 1 mm from the apical terminus. However, in the other groups, the decrease of the screw-in effect and torque did not occur in the last 1 mm from the apical terminus. Conclusions: The establishment of a larger glide path before NiTi rotary instrumentation appears to be appropriate for safely shaping the canal. It is recommended to establish #20 glide path with NiTi file when using ProTaper NiTi rotary instruments system safely.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1671-1680
• /
• 2014

The purpose of this research is to observe the rate of breastfeeding and to identify factors related to the breastfeeding in rural area. We conducted a survey targeting 139 mothers whose infants are less than 60 months old in Ulju-gun, Ulsan. SPSS Win 18.0 program was used as the data analysis and a statistical statement by mean, standard deviation, and logistic regression analysis. According to the findings of this study, it indicated that the factors affecting the rate of breastfeeding in a rural region are mothers'job, 1 month breastfeeding after birth and the education of breastfeeding before birth. In this study we need to continuously conduct the breast feeding education by hospitals or clinics before birth, so that breast feeding can be provided well after birth. Also, we need to establish the social system and atmosphere without any disadvantages resulting from maternity leave so that working mothers can provide full breast feeding for six months after birth because the return to work can interfere with the practice of breast feeding.

• Journal of Environmental Science International
• /
• v.28 no.12
• /
• pp.1133-1145
• /
• 2019

Successful launch requires state-of-the-art launch vehicle technology and constant test operations, However, the meteorological threat to the launch vehicle flight trajectory is also an important factor for launch success. Atmospheric stability above the Naro Space Center at the this time is very important, especially because the initial flight operation can determine the success of the launch. Moreover, during the flight of launch vehicle with rapid pressure and thrust into the atmosphere, convection activity in the atmosphere may create environmental conditions that cause severe weather threats such as thunderstorms. Hence, studies of atmospheric instability characteristics over the Naro Space Center are a necessary part of successful launch missions. Therefore, the main aims of this study were to (1) verify the atmospheric stability index and convection activity characteristics over the Naro Space Center using radiosonde data observed from 2007 to 2018 by the Naro Space Center, (2) analyze changes in the atmospheric stability index according to monthly and seasonal changes, and (3) assess how the calculated atmospheric stability index is related to actual thunderstorm occurrence using statistical analysis. Additionally, we aimed to investigate the atmospheric characteristics above the Naro Space Center through the distribution chart of the atmospheric stability index during summer, when convection activity is highest. Finally, we assessed the relationship between lightning occurrence and unstable atmospheric conditions, through predictability analysis performed using the lightning observation data of the Korea Meteorological Administration.

• Tribology and Lubricants
• /
• v.32 no.4
• /
• pp.132-139
• /
• 2016

The piston of a marine diesel engine works under severe conditions, including a combustion pressure of over 180 bar, high thermal load, and high speed. Therefore, the analyses of the fatigue strength, thermal load, clamping (bolting) system and lubrication performance are important in achieving a robust piston design. Designing the surface profile and the skirt ovality carefully is important to prevent severe wear and reduce frictional loss for engine efficiency. This study performs flexible multi-body dynamic and elasto-hydrodynamic (EHD) analyses using AVL/EXCITE/PU are performed to evaluate tribological characteristics. The numerical techniques employed to perform the EHD analysis are as follows: (1) averaged Reynolds equation considering the surface roughness; (2) Greenwood_Tripp model considering the solid_to_solid contact using the statistical values of the summit roughness; and (3) flow factor considering the surface topology. This study also compares two cases of skirt shapes with minimum oil film thickness, peak oil film pressure, asperity contact pressure, wear rate using the Archard model and friction power loss (i.e., frictional loss mean effective pressure (FMEP)). Accordingly, the study compares the calculated wear pattern with the field test result of the piston operating for 12,000h to verify the quantitative integrity of the numerical analysis. The results show that the selected profile and the piston skirt ovality reduce friction power loss and peak oil film pressure by 7% and 57%, respectively. They also increase the minimum oil film thickness by 34%.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.1 s.49
• /
• pp.141-152
• /
• 1995

This study was performed to find out the influences of ethanol on the metabolism of trichloroethylene(TRI) in rats. TRI in corn oil at the dosage of 150, 300, 600 mg/kg was injected peritoneally once a day for two days to two groups. In one group ethanol(4 g/kg) was taken orally 30 minutes before TRI injection, and the other group ethanol was not. The results of experiments are as follows: 1. The contents of cytochrome P-450 and $b_5$ had inverse relationship with in-jected TRI amounts in both groups. 2. The activity of NADPH P-450 reductase was decreased slowly in TRI injected group related with TRI amount, but decreased drastically in the group pretreated with ethanol. 3. The activity of NADH $b_5$ reductase had relationship with injected nt amount , but the statistical significance was found only in the groups of 300 and 600 mg/kg of TRI injected without relevance to ethanol when compared with the group that was not injected. 4. The activity of ADH was more decreased and ALDH activity was more increased in groups that TRI injected and ethanol was pretreated with ethanol groups than in group without any treatment. These results suggest that ethanol may inhibit epoxide formulation, the first step of TRI metabolism, and change from TCE-OH to TCA also.

• School Mathematics
• /
• v.10 no.3
• /
• pp.319-337
• /
• 2008

Intuitions in independence formed by common language help and also hinder the establishment of new conceptual system about independence as a mathematical term. Intuitions which entail such conflicts can be a driving force in explaining independence but at the same time, it is the impedimental factor causing a misconception. The goal of this paper is to help students use the intuitions properly by distinguishing helpful intuitions and impedimental intuitions. This paper suggests that we need to reveal in teaching the misconception resulting not from mathematic but from linguistic interpretation of independence. This paper points out the need for the clear distinction of independence of trials and independence of events and gives an counterexample of the case that sampling with and without replacement shouldn't be specified as a representative example of independence and dependence of events. The analysis of intuition in this parer is based on intuitions classified by Fischbein and this paper analyzed institutions applied to the concept of independence corresponding intuitions classified by Fischbein.

• Journal of Engineering Education Research
• /
• v.8 no.4
• /
• pp.20-30
• /
• 2005

The purpose of this study is the development of SPMP(Student Portfolio Management Program) to aid performance of student program outcomes related to program educational objectives. SPMP is developed to manage accreditation conditions, student materials, academic results through system database and to provide synthetic data for engineering education through statistical process. There are three functions to construct SPMP. First, the function of student information management is organized on various input data related to academic program, resume, etc. Second, the function of accreditation condition management is identified by the evaluation of program outcomes, subject grades, etc. Third, the function of course work data management is made by the operation of the academic reports and productions. The result of this study is expected to effectively provide constructive directions for continuous management in accreditation of engineering education and to support student portfolio for submission in required application.

• Survey Research
• /
• v.5 no.1
• /
• pp.103-130
• /
• 2004

Main monthly household surveys conducted by Korea National Statistical Office are economically active population survey(EAPS) and household income and expenditure survey(HIES). Samples of these two surveys are redesigned every 5 years based on Census. This paper is about sample redesign of household survey conducted in 2002 based on 2000 Census. Main improvements of 2002 sample redesign are the introduction of rotation sampling system, the expansion of HIES survey area from urban to whole country and the foundation of basement to make small area estimation for the unemployment statistics. Also the number of sample households within a enumeration district(ED) is reduced from 24 to 20. That makes it possible to select more ED samples which provides better precision for EAPS and HIES. To select representative samples for the population, different classification index is used for each metropolitan area and provinces.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.199-206
• /
• 2018

This study was to investigate the Influence of smart phone use on gait in healthy adults. Twenty healthy adults were recruited in this study. All subjects performed twice for each normal gait and smart phone gait. The normal gait walked at their chosen speed, and the smart phone gait walked while watching the video. GAITRite system was used to identify the temporal and spatial variables related to the gait pattern during walking. Statistical analysis was analyzed by paired t-test. In comparison of temporal variables, smart phone gait was significantly lower in gait speed and cadence than in normal gait(p<.05), and was significantly longer in single support time and double support time(p<.05). In comparison of spatial variables, smart phone gait was significantly shorter in step length and stride length than in normal gait(p<.05) and significantly longer in step width(p<.05). The results of this study demonstrated that smartphone use can negatively affect the correct gait patterns during walking.