• The Journal of Korean Medicine
• /
• v.37 no.3
• /
• pp.97-111
• /
• 2016

Objectives: This study aims to investigate the policy status of traditional medicine standardization between Korea and China as well as to derive a strategic development plan for Korean medicine standardization. Methods: The existing national plans and preceding studies on traditional medicine standardization in Korea and China were reviewed, and scope of the study was categorized as having three main aspects: infrastructure; standard development and standardization activities; and application and diffusion. Results: Nine development plans for Korean medicine standardization derived under the study were as follows: With regard to infrastructure of standardization, 1) standardization plan of Korean medicine shall be established based on involvement of multi-government ministries. 2) It shall be set with a consistent cooperation process among standardization-related organizations, as well as 3) encourage the industry to participate in standardization activities. To activate standards development, 4) launching the R&D-standardization-industrialization linked project, 5) supporting Korean medicine society and the mirror committee for motivation, and 6) planning the international joint research for development of standard and expanding standardization activities are recommended. In the aspect of application, there is a need for 7) expanding certification systems for the industry and 8) evaluation and feedback on the life-cycle of standardization. Lastly, 9) educational programs for training experts of standardization shall be developed and implemented. Conclusions: In order to invigorate standardization activities for Korean medicine, enhancement of planning and evaluation capacity, ensuring the strategic development of standards, broadening boundaries of international standardization activities, and training professionals are required.

• Journal of Science and Technology Studies
• /
• v.2 no.1 s.3
• /
• pp.63-83
• /
• 2002

This article examines the historical and general characteristics of science and technology policy in Korea. Historical characteristics are analyzed through formation period, growth period, and transition period. Korea institutional sis for the promotion of science and technology was made from the initial stage of industrialization. As national R&D programs were launched, technological activities in the private sector were rapidly increased from the 1980s. Korea pursued new directions of science and technology policy with the formation of related laws and Plans from the late 1990s. General characteristics are analyzed by the concept of 'policy regime'. The prime policy goal of science and technology policy in Korea has been related to industrial development so far. In the policy means, input element has been increased focusing on the external aspects. Bureaucratic policy culture has dominated other cultures including economic culture, academic culture, and civic culture.

• Journal of Fisheries and Marine Sciences Education
• /
• v.15 no.2
• /
• pp.206-218
• /
• 2003

In spite of the importance of a fishing industry, neither any terminology defined in details nor academic systems to educate the workers in the fishery were established in the fisheries social education. The fisheries social education was considered to be the practical area around the actual fields. Therefore, on-site education was very important. Accordingly, this study collected and analyzed theoretical basis of a social education and data on the rural adult education and examined the actual status of the fishing industry in Korea and fisheries extension services enterprise and fisheries developmental enterprise corresponding to the actual fisheries social education conducted in Korea. On the basis of these frames, this study summarized the direction for the progress of fisheries social education that has not been studied until now for the purpose of suggesting the future directions of the fisheries social education as follows; The recognition on the importance of fisheries social education and fundamental researches in the fisheries social education should be extended. The practical development of fisheries social education should be realized. Fisheries extension services enterprise should be evolved by fishermen. The abilities of instructors in the fisheries social education should be improved. The academic factors in the fisheries social education should be emphasized. Inter-disciplinary and multi-disciplinary approaches should be adopted. Various programs should be developed for the progress of the fisheries social education. The exclusive department in charge of the fisheries social education should be established. The information system for the fisheries social education should be secured. The industry, academic organizations and the organs should make cooperation. The fisheries social education should be provided by general social education institutions for the progress. The fisheries development should be deployed on the basis of environmental preservation. It is necessary to deploy the new fishing village movement like the Saemaul movement to the fisheries. The administrative and financial supports for the fisheries social education should be expanded. It is essential to cultivate the future fishermen for the international competitiveness.

• Journal of Science and Technology Studies
• /
• v.8 no.1
• /
• pp.29-54
• /
• 2008

This is to review the reform of the governance for science and technology advanced by the Noh Moo Hyun government. The reform mainly included introducing the vice premiership for science and technology, strengthening the coordinative function of the National Science and Technology Committee over the public R&D budget and programs, and establishing the Office of Science and Technology Innovation under the vice premier for science and technology. The reform aims to improve not only the policy coordinative mechanism but policy discourse mechanism over the enhanced science and technology policy. This paper argues that Noh Moo Hyun Government's reform of the governance for science and technology was not successful. The reason is that the reform targeted mainly to improve the policy coordination among government departments concerning science and technology policy. But it was nearly neglected to make effective the policy discourse mechanism linking the state actors and societal actors.

• Journal of Animal Science and Technology
• /
• v.51 no.3
• /
• pp.201-206
• /
• 2009

Seventeen porcine microsatellite (MS) markers recommended by the EID+DNA Tracing EU project, ISAG and Roslin institute were selected for the use in porcine individual and brand identification. The MSA, CERVUS, FSTAT, GENEPOP and API-CALC programs were applied for calculating heterozygosity indices. By considering the hetreozygosity value and PCR product size of each marker, we established a MS marker set composed of 13 MS markers (SW936, SW951, SW787, S00090, S0026, SW122, SW857, S0005, SW72, S0155, S0225, SW24 and SW632) and two sexing markers. The expected probability of identity among genotypes of random individuals (PI), probability of identity among genotypes from random half sibs ($PI_{half-sibs}$) and among genotypes of random individuals, probability of identity among genotypes from random sibs($PI_{sibs}$) were estimated as $2.47\times10^{-18}$, $6.39\times10^{-13}$ and $1.08\times10^{-8}$, respectively. The results indicate that the established marker set can provide a sufficient discriminating power in both individual and parentage identification for the commercial pigs produced in Korea.

• Journal of Preventive Medicine and Public Health
• /
• v.42 no.5
• /
• pp.331-336
• /
• 2009

Objectives : The objectives of this study were to determine the relationship between lifestyle-implementation and metabolic syndrome in an electronics research and development company, and to provide a foundation for health providers of health management programs for setting priorities. Methods : From July 1 to July 16, 2008 we carried out a descriptive cross-sectional survey. Consecutive workers of one R & D company in Seoul, Korea (N=2,079) were enrolled in study. A checklist for lifestyle (from the National Health Insurance Corporation) consisted of questions regarding diet, drinking, smoking and exercise. After the survey, researchers obtained data from health profiles for metabolic syndrome(waist-circumference, triglycerides, HDL cholesterol, blood pressure and fasting blood sugar level). Lifestyle was recorded as good or not good. Statistical analysis of metabolic syndrome and the lifestyle of subjects was done using multiple logistic regression analysis. Results : The prevalence of metabolic syndrome in our study gropu was 13.3% (N=277). After adjustment for age, the adjusted odds ratios (odds ratio, 95% confidence intervals) for metabolic syndrome increased in proportion to the number of bad habits: two (1.72, 1.23-2.44), three (2.47, 1.73-3.56), and four (3.63, 2.03-6.34). Relative to subjects eating both vegetables and meat', the OR for 'meat' eaters was 1.66 (1.18-2.31). Compared with 'nonsmokers and ever-smoker', the OR for 'current-smoker' was 1.62 (1.25-2.10). Compared with 'Healthy drinker', the OR for 'unhealthy drinker' was 1.38 (1.05-1.83). Conclusions : Poor lifestyle was associated with an increased likelihood of metabolic syndrome. These findings suggest that lifestyle-based occupational health interventions for young employees should include a specific diet, smoking cessation, and healthy-drinking programs.

• Journal of Technology Innovation
• /
• v.22 no.2
• /
• pp.1-30
• /
• 2014

Offset trade has been applied in Republic of Korea's defense acquisition programs since early 1980s and used for national economic development as well as enhancement of military capabilities. The accumulated offset trade value amounts to over 10 billion dollars by 2010. However, questions in regards to the effectiveness of offset trade have been constantly raised. As it is a quite difficult task to analyze and calculate the application performance of defense technologies acquired by offsets objectively, limited level of quantitative analysis of application performance have been conducted so far. Hence, in this paper, we came to understand the overall status of application of those technologies through in-depth performance analysis and suggested some specific policies for the further development of offset trade based on the analysis results. To begin with, we developed a questionnaire based on performance indicator deducted through literature review of relevant researches, and conducted survey of major offset recipients. Also, another survey of offset experts belonged to the army, government organization, research institute and companies was conducted to evaluate the performance and effectiveness of offsets qualitatively. And we analyzed the efficiency of application performance using DEA. The results of all surveys are showing that there is positive accomplishment in the technological aspect, but in economic aspect, it shows relatively inactive outcome. Based on these results, policy direction is considered to be changed from the emphasis on the acquisition of core technology to revitalization of domestic defense industry in line with new government's policy orientation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1710-1714
• /
• 2010

The budget for the acquisition and R&D for the national defence systems has come out of tax payers' pockets. On the other hand, the weapon systems become more complex and thus the underlying costs tend to increase continuously. As such, the need for efficiently managing the budget has drastically increased. In accordance with this necessity, the Defence Acquisition Program Administration (DAPA) of Korea has issued the instruction No.65 dictating that systems engineering (SE) must be applied when weapon systems are acquired or developed in Korea. Specifically, a list of the products that should be generated from the acquisition programs is provided. The problem is that the unexperienced companies in the defence systems industry cannot easily know how to approach the new regulation. The purpose of this study is to devise a possible remedy to solve the problem. To do so, we first review the list of the products that are required by DAPA. Then, an appropriate systems engineering processes is studied for each product. Then, a necessary link between each product and SE process activity is identified and summarized. The result obtained may be useful as a stepping stone to develop more efficient method for the list of the products.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2430-2434
• /
• 2005

Automatic FPC punching instrument for the improvement of working condition and cost saving is introduced in this paper. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. 3D Mechanical design tool(Pro/E) is used to manage the exact tolerance circumstances and avoid design failures. Simulation is performed to make the complete vision based punching machine before assembly, and this procedure led to the manufacturing cost saving. As the image processing algorithms, dilation, erosion, and threshold calculation is applied to obtain an exact center position from the FPC print marks. These image processing algorithms made the original images having various noises have clean binary pixels which is easy to calculate the center position of print marks. Moment and Least square method are used to calculate the center position of objects. In this development circumstance, Moment method was superior to the Least square one at the calculation of speed and against noise. Main control panel is programmed by Visual C++ and graphical Active X for the whole management of vision based automatic punching machine. Operating modes like manual, calibration, and automatic mode are added to the main control panel for the compensation of bad FPC print conditions and mechanical tolerance occurring in the case of punch and die reassembly. Test algorithms and programs showed good results to the designed automatic punching system and led to the increase of productivity and huge cost down to law material like FPC by avoiding bad quality.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.5
• /
• pp.375-387
• /
• 2023

The subsea power cables are increasingly important for harvesting renewable energies as we develop offshore wind farms located at a long distance from shore. Particularly, the continuous flexural motion of inter-array dynamic power cable of floating offshore wind turbine causes tremendous fatigue damages on the cable. As the subsea power cable consists of the helical structures with various components unlike a mooring line and a steel pipe riser, the fatigue analysis of the cables should be performed using special procedures that consider stick/slip phenomenon. This phenomenon occurs between inner helically wound components when they are tensioned or compressed by environmental loads and the floater motions. In particular, Vortex-induced vibration (VIV) can be generated by currents and have significant impacts on the fatigue life of the cable. In this study, the procedure for VIV fatigue analysis of the dynamic power cable has been established. Additionally, the respective roles of programs employed and required inputs and outputs are explained in detail. Demonstrations of case studies are provided under severely sheared currents to investigate the influences on amplitude variations of dynamic power cables caused by the excitation of high mode numbers. Finally, sensitivity studies have been performed to compare dynamic cable design parameters, specifically, structural damping ratio, higher order harmonics, and lift coefficients tables. In the future, one of the fundamental assumptions to assess the VIV response will be examined in detail, namely a narrow-banded Gaussian process derived from the VIV amplitudes. Although this approach is consistent with current industry standards, the level of consistency and the potential errors between the Gaussian process and the fatigue damage generated from deterministic time-domain results are to be confirmed to verify VIV fatigue analysis procedure for slender marine structures.