• Title/Summary/Keyword: narrow line

Search Result 437, Processing Time 0.025 seconds

Characteristics of Insertion Loss of Transmission Line with Different Line Length Crossing a Rectangular Aperture in a Backplane (백 플레인의 개구를 통과하는 길이가 다른 전송 선로의 삽입 손실 특성)

  • Jung, Sung-Woo;Kim, Ki-Chai
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.19 no.2
    • /
    • pp.237-243
    • /
    • 2008
  • This paper presents the backplane effects for two-wire transmission line with different line length crossing the rectangular aperture in an infinite ground backplane. The FDTD method is used to determine the characteristics of the backplane insertion loss and return loss of the transmission line in accordance with the transmission line spacing and additional wire lengths. The results show that the insertion gain is obtained for the narrow spacing of the transmission line and the insertion loss is appeared for the transmission line with the additional wire The measurements of return loss are performed to verify the theoretical analysis.

Measurement and Analysis of Propagation Characteristics in Curved Subway Tunnel Environments (곡선형 지하철 터널환경에서 전파 특성의 측정과 분석)

  • 정회동;박노준;강영진;송문규
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.8A
    • /
    • pp.950-961
    • /
    • 2004
  • In this paper, we measured and analyzed propagation characteristics in a subway tunnel that is recently increasingly becoming one of the radio communication environments. The measurements are carried out in a subway tunnel with frequency bands of 2.45㎓ and 5.8㎓. The length of tunnel we used for this study is 175m of LOS (Line-of-sight) and 270m of NLOS (Non Line-of-Sight). The subway tunnel is curved and its cross section is horseshoe type. The measurement systems we employ in this study are a narrow-band system and a wide-band system. The narrow-band system is used to get path loss measurement and the wide-band system is used to figure out delay profile measurement. In particular, the wide-band system consists of 1023 length PN sequence generator using a chip rate of 80MHz based on a sliding correlation technique. The omni-directional antennas and directional antennas are used to analyze propagation characteristics for beam type of antenna. The path loss displays only pure path loss of a tunnel environment. The delay profile indicates the mean excess delay and RMS (root mean square) delay spread.

A study on custom Hanbok design through on-line review - From 2016 To 2017 - (온라인 후기를 통한 맞춤 웨딩한복의 디자인 고찰 2016년~2017년)

  • Ryu, Kyoung-ok
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • v.20 no.3
    • /
    • pp.27-32
    • /
    • 2018
  • Hanbok is a our own history and tradition and is an icon of Korean history and culture. Today, the costumes are moving around the world fashion trend due to the development of mass media and internet at the same time. This is an important clue to marketing activities and can be used for predictive analysis. Although Hanbok is changing little by little every year, research on the trend of Hanbok is rare. This study analyzed the results of searching for 'Hanbok' as a keyword in Portal Site Naver and posting a customized purchase of Hanbok for marriage between 2016 and 2017. The analysis was based on analyzing the photos uploaded, and analyzing purchase reason in the On-line review. Most buyer of Hanbok purchased for prepare marriage. The choice of a customized hanbok is mostly to search online or to use the fair. The most important factor in choosing a custom Hanbok that appeared in online reviews is color and then price. The color of the jacket is mostly light color and the off-white color is the most used and the long skirt such as the pink system, the chorale system and the red system, and it can be seen that the pink skirt is overwhelmingly large. In the design of Hanbok, The sleeves were straight and narrow, and the length was the chest line. The collar were enlarged and widened. 고름 used the sole color instead of the jacket and skirt color, and it was narrow not long. skirt's pleats was wide, and designed to overlap with double color of the fabric.

On-line Magnetic Resonance Quality Evaluation Sensor

  • Kim, Seong-Min;McCarthy, Michael J.;Chen, Pictiaw;Zion, Boaz
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 1996.06c
    • /
    • pp.314-324
    • /
    • 1996
  • A high speed NMR quality evaluation sensor was designed , constructed and tested . The device consists of an NMR spectrometer coupled to a conveyor system. The conveyor was run at speeds ranging from 0 to 250 mm/s. Spectral of avocado fruits and one-dimensional magnetic resonance images of pickled olives were acquired while the samples were moving on a conveyor belt mounted through a 20Tesla NMR magnet with a 20 mm diameter surface coil and a 150 mm diameter imaging coil respectively. Fro a magnetic resonance spectrum analysis, motion through variations in the magnetic field tends to narrow spectral line width just like using sample rotation in high resolution NMR to narrow spectral line width. Spectrum analysis was used to detect the dry weight of avocado fruits using the ratio oil and water resonance peaks. Good correlations maximum r=0.970@ 50 mm/s and minimum r=0.894@250mm/s ) between oil and water resonance peak ratio and dry weight of avocados were observed at speeds ra ging from0 to 250mm/s. For the application of magnetic resonance imaging (MRI) method, the projections were used to distinguish between pitted and non-pitted olives . Effect of fruit position in the coil was tested and coil degree effects were noticed when projects were generated under dynamic conditions. Various belt speeds (up to 250mm/s) were tested and detection results were compared to static measurements. Higher classification errors were occurred at dynamic conditions compared to errors while olives were at rest.

  • PDF

The Characteristic of Fatigue Crack Propagation of Laser Welded Sheet Metal for Automobile Body Panel (자동차 차체제작용 레이저 용접 판재의 피로균열 전파 특성)

  • 곽대순;권윤기;오택열;이경엽;강연식
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.9 no.3
    • /
    • pp.181-189
    • /
    • 2001
  • For the Tailor Welded Blank sheet used fur automobile body panel, the characteristics of fatigue crack propagation behavior were studied. The thickness of specimen was machined to be same (0.9+0.9mm) and different (0.9+2.0mm). As a base test, mechanical properties around welding zone were examined. The results indicated that there were no significant decreases in mechanical properties, but hardness around welding bead is 2.3 times greater than base material. The crack propagation rate was noticeably decreased around welding line and rapidly increased as it passed by welding line. Reviewing the shape of the crack propagation, crack width around welding line was wide around the welding zone due to retardation of crack growth, but it became narrow passing welding line due to decreased toughness. Elasto-Plastic analysis was performed by finite element analysis fur explaining the test results.

  • PDF

Superconducting Bandpass Fitter Using Hairpin-type Microstrip Line with Narrow Bandwidth Centered at 14 GHz (14 GHz 헤어핀형 초전도 대역통과 필터)

  • Son, Seok-Cheon;Kim, Cheol-Su;Lee, Sang-Yeol;Yoon, Hyung-Kuk;Yoon, Young-Joong
    • Proceedings of the KIEE Conference
    • /
    • 1999.07d
    • /
    • pp.1852-1854
    • /
    • 1999
  • In order to enhance satellite communication system performance, filters are required with the characteristics of sharp skirt, low insertion loss, and high power handling capability. But the performance of microwave passive filters is significantly declined by the conduction losses, especially in case of planar structures using film conductors. By using high temperature superconducting(HTS) film material as the conductor, higher performance could be expected. We have designed and developed narrow bandpass filters using haripin-type superconducting microstrip line for satellite communication. High quality superconducting YBCO thin films have been grown on MgO substrates by pulsed laser deposition(PLD) The deposited YBCO films were patterned by conventional wet-etching process. The transition temperatures of these films had shown 86 - 89 K. The film thicknesses were about 500 nm. Experimental results are presented for the insertion loss and return loss of the filter at 60 K.

  • PDF

Ground-based and On-satellite Observations of Be and B Stars (인공위성관측과 지상관측에 의한 Be성과 B성의 연구)

  • 정장해
    • Journal of Astronomy and Space Sciences
    • /
    • v.5 no.1
    • /
    • pp.9-18
    • /
    • 1988
  • Gamma Cassiopeae has been observe at Yonsei University Observatory(YUO) for 31 nights in the period 1983-1987 and a total of 312 UBV observations(104 in each colour) was secured. Light curves of ${\gamma}$ Cas in V, B-V, and U-B have been constructed with the YUO data; among them we present selected light curves of 5 different long nights. Discussed are the general photometric behaviour of ${\gamma}$ Cas, especially in connection with B-V changes, V/R variations of $H\alpha$ and H$\beta$, and high velocity narrow component(hvnc) exhibited in the far UV. Six spectral image sets of $\varepsilon$Per archived on IUE satellite are reduced and their line profiles in C IV and Si IV resonance lines are analyzed to find out any change, but the evidence is unlikely.

  • PDF

Estimation of Additive and Dominance Genetic Variances in Line Breeding Swine

  • Ishida, T.;Kuroki, T.;Harada, H.;Fukuhara, R.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.14 no.1
    • /
    • pp.1-6
    • /
    • 2001
  • Additive and dominance genetic variances were estimated for purebred Landrace selected with line breeding from 1989 to 1995 at Miyazaki Livestock Experiment Station, Kawaminami Branch. Ten body measurements, two reproductive traits and fifteen carcass traits were analyzed with single-trait mixed model analysis. The estimates of narrow-sense heritabilities by additive model were in the range of 0.07 to 0.46 for body measurements, 0.05 to 0.14 for reproductive traits, and 0.05 to 0.68 for carcass traits. The additive model tended to slightly overestimate the narrow-sense heritabilities as compared to the additive and dominance model. The proportion of the dominance variance to total genetic variance ranged from 0.11 to 0.91 for body measurements, 0.00 to 0.65 for reproductive traits, and 0.00 to 0.86 for carcass traits. Large differences among traits were found in the ratio of dominance to total genetic variance. These results suggested that dominance effect would affect the expression of all ten body measurements, one reproductive trait, and nine carcass traits. It is justified to consider the dominance effects in genetic evaluation of the selected lines for those traits.

A Census of Ionized Gas Outflows in Local Type-2 AGNs

  • Bae, Hyun-Jin;Woo, Jong-Hak
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.39 no.2
    • /
    • pp.58.1-58.1
    • /
    • 2014
  • Energetic gas outflows from active galactic nuclei (AGNs) may have a crucial role in galaxy evolution. In this contribution, we present a census of ionized gas outflows using a large sample (~23,000) of local (z < 0.1) type-2 AGNs selected from the Sloan Digital Sky Survey DR 7. By measuring the velocity offset of narrow emission lines, i.e., [O III] ${\lambda}5007$ and the Balmer lines, with respect to the systemic velocity measured from the stellar absorption lines, we find ~47% of AGNs showing an [O III] line-of-sight velocity offset ${\geq}20km\;s-1$. The fraction in type-2 AGNs is similar to that in type-1 AGNs after considering the projection effect. AGNs with larger [O III] velocity offsets, in particular with no or weak $H{\alpha}$ velocity offsets, tend to have higher Eddington ratios, implying that the [O III] velocity offset is related to on-going black hole activity. Also, we find the different distributions of the host galaxy inclination between the AGNs with blueshifted [O III] and the AGNs with redshifted [O III], supporting the model of biconical outflow with dust obscuration. Meanwhile, for ~3% of AGNs, [O III] and $H{\alpha}$ exhibit comparable large velocity offsets, suggesting a more complex gas kinematics than decelerating outflows in the narrow-line region.

  • PDF

Turbulent Wake Flow around Tubes in Single Row Tube Banks (일렬관군에서의 난류 후류특성에 관한 연구)

  • 조석호;부정숙
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.13 no.5
    • /
    • pp.1023-1031
    • /
    • 1989
  • An experimental study is conducted to investigate the turbulent wake flow around tubes in vertical single row tube banks. All measurements are performed at Reynolds number(Re$_{max}$) 4.2*10$_{3}$ - 2.5*10$_{4}$ with varying tube spacings from the wide pitch ratio(H/D=3.07) to the very narrow one(H/D=1.23). Flow patterns are visualized using the smoke-wire method. Mean static pressures, velocity components, and various statistical quantities of turbulence are obtained by the computer on-line technique. In the case of wide tube spacings, the near wakes of tube show similar trends to those of a single tube, and their flow indicats an anisotropic turbulence. However, as the pitch ratio decreases, wide and narrow wakes appear alternately behind adjacent tubes due to the deflected flow. Also, in the case of H/D .leq. 1.54, Karman vortex is not formed at the side of relatively wide wake.e.