• Journal of Electrical Engineering and Technology
• /
• 제2권2호
• /
• pp.267-273
• /
• 2007

A depletion-mode MOSFET has been analyzed to evaluate its electrical behavior using a novel 3-D numerical simulation package. The characterizing analysis of the BC MOSFET was performed through short-channel narrow-channel and small-geometry effects that are investigated, in detail, in terms of the threshold voltage. The DIBL effect becomes significant for a short-channel device with a channel length of $<\;3({\mu}m)$. For narrow-channel devices the variation of the threshold voltage was sharp for $<4({\mu}m)$ due to the strong narrow-channel effect. In the case of small-geometry devices, the shift of the threshold voltage was less sensitive due to the combination of the DIBL and substrate bias effects, as compared with that observed from the short-channel and narrow-channel devices. The characterizing analysis of the narrow-channel and small-geometry devices, especially with channel width of $<\;4({\mu}m)$ and channel area of $<\;4{\times}4({\mu}m^2)$ respectively, can be accurately performed only from a 3-D numerical simulation due to their sharp variations in threshold voltages.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.203-206
• /
• 2008

There are lots of the narrow pass on alluvial channel of Korea. Most of research about this narrow pass of channel were focused on incremental effect of water level at backwater segment. In the meantime this research showed that it is important to valuate the river-bed variation at backward and forward around narrow pass. The sediment deposit at not only the backward of narrow pass but also the forward affected incremental effect of water level. The sediment deposit at the forward of narrow pass headed by sediment that passed through the narrow passed or scoured right around it.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.323-324
• /
• 2012

Flammability limits of opposed flow diffusion flame in a narrow channel was investigated experimentally and theoretically. There were three different extinction modes corresponding to high strain rate (HSR), low strain rate (LSR) and dilution ratio (DR) limits. To investigate these limits, a theoretical study was followed by focusing on flow and heat transfer characteristics. Consequently, a dead space concept that has been used for premixed flames was important to reveal the heat loss mechanism in a narrow channel especially for LSR conditions even in the case of diffusion flames.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.546-553
• /
• 2022

Narrow rectangular channels are employed in nuclear research reactors that use plate-type nuclear fuels, high heat-flux compact heat exchangers, and high-performance micro-electronics cooling systems. Two-phase flow in narrow rectangular channels is important, and it needs to be better understood because it is considerably different than that in round tubes. In this study, mechanistic models were developed for the flow regime transition criteria for various flow regimes in co-current air-water two-phase flow for vertical downward flow inside a narrow rectangular channel. The newly developed criteria were compared to a flow regime map of downward air-water two-phase flow inside a narrow rectangular channel with a 2.35-mm gap width under ambient temperature and pressure conditions. Overall, the proposed model showed good agreement with the experimental data.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.9-12
• /
• 2012

In this study, opposed flow combustion was re-visited in a narrow channel. Various flame behaviors were observed. Due to the confined structure of the combustor in this study, flame structures at very narrow strain rate could be stabilized and their characteristics were investigated. This study will be helpful to understand overall flame behavior of non-premixed flame in a narrow combustion space, and will also be useful to develop small combustors.

• 대한전자공학회논문지
• /
• 제22권6호
• /
• pp.58-62
• /
• 1985

이온 주입된 소형 MOSFET소자에 대한 해석적 문턱 전압 모델이 유도되었다. 일정한 도우핑 농도를 갖는 MOSFET에 적용되는 Yau 모델을 implanted channel구조와 bird's beat구조의 MOSFET에 대하여 적합한 형태로 수정하여 short channel 현상과 narrow width 현상을 정량적으로 설명하였다. Channel영역의 불순물 분포를 SUPREM 결과에서 2-step profile로 근사시켜 문턱 전압의 short channel model을 제안하였다. Weighting factor를 사용하여 bird's beat 영역의 불순물 분포를 고려함으로써 narrow width 현상을 성공적으로 설명하였다.

• 한국정보통신학회논문지
• /
• 제23권8호
• /
• pp.981-987
• /
• 2019

본 논문에서는 파일럿으로 발생하는 파일럿 오버헤드를 감소시키면서 협대역 간섭신호 혹은 재머에 대응할 수 있는 새로운 SC-FDE (single carrier frequency domain equalization) 구조를 제안한다. 기존의 SC-FDE 구조는 협대역 재머가 존재할 때 시간영역 채널 추정이 어려워 수신기의 성능이 저하되는 단점이 있다. 또한 매 SC-FDE마다 채널추정을 위한 파일럿을 전송하여 스펙트럼 효율이 저하되는 문제도 있다. 이와 같은 문제를 해결하기 위해 제안된 구조는 시간영역 채널 추정 없이 곧바로 주파수 영역 채널 추정을 수행할 수 있도록 설계된다. 또한 파일럿 오버헤드를 감소시키기 위해서 두 개의 파일럿 사이에 여러 개의 SC-FDE 데이터 블록을 전송하고, 두 개의 파일럿을 이용한 선형 보간 채널 추정을 통해 각 데이터 블록에서의 채널 특성을 찾는다. 이렇게 구한 채널 추정값을 사용하여 주파수 영역 등화를 수행하면 협대역 재머가 있는 상황에서도 재머 제거와 함께 안정적인 등화가 가능하다. 제안하는 구조의 성능은 컴퓨터 모의실험을 통해 확인한다.

• 한국정보통신학회논문지
• /
• 제22권5호
• /
• pp.787-793
• /
• 2018

본 논문은 협대역 간섭신호에 대응하기 위한 새로운 SC-FDE 구조를 제안한다. 기존의 SC-FDE구조는 협대역 간섭신호가 발생했을 시 채널 추정이 어려워지고, 그로 인해 데이터 복원이 어려운 상황이 발생한다. 이러한 문제를 해결하기 위해 본 논문에서는 큰 전력의 협대역 간섭신호가 발생했을 때에도 주파수영역 채널추정이 가능한 새로운 SC-FDE 프레임 구조를 제안한다. 구체적으로 기존방식은 시간영역 채널추정을 먼저 수행한 후 푸리에변환을 통해 주파수 영역 채널을 추정하지만 본 논문은 곧바로 수신신호에서 주파수영역에서 채널추정이 가능하도록 새로운 SC-FDE의 구조를 제안하며 제안하는 구조의 성능 향상은 컴퓨터 모의실험을 통해 검증하였다. 모의실험 결과 재머의 크기가 수신신호의 크기와 동일한 환경에서 제안하는 방식은 재머가 없는 경우 대비 약 2 dB 이내의 손실로 수신이 가능하지만 기존의 방식은 통신이 불가능 하다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권1호
• /
• pp.102-109
• /
• 2016

The hydrodynamic interaction between two large vessels can't be neglected when two large vessels are closed to each other in restricted waterways such as in a harbor or narrow channel. This paper is mainly concerned with the ship maneuvering motion based on the hydrodynamic interaction effects between two large vessels moving each other in curved narrow channel. In this research, the characteristic features of the hydrodynamic interaction forces between two large vessels are described and illustrated, and the effects of velocity ratio and the spacing between two vessels are summarized and discussed. Also, the Inchon outer harbor area through the PALMI island channel in Korea was selected, and the ship maneuvering simulation was carried out to propose an appropriate safe speed and distance between two ships, which is required to avoid sea accident in confined waters. From the inspection of this investigation, it indicates the following result. Under the condition of $SP_{12}{\leq}0:5L$, it may encounter a dangerous tendency of grounding or collision due to the combined effect of the interaction between ships and external forces. Also considering the interaction and wind effect as a parameter, an overtaken and overtaking vessel in narrow channel can navigate while keeping its own original course under the following conditions; the lateral separation between two ships is about kept at 0.6 times of ship length and 15 degrees of range in maximum rudder angle. On the other hand, two ships while overtaking in curved narrow channel such as Inchon outer harbor in Korea should be navigated under the following conditions; $SP_{12}$ is about kept at 1.0 times of ship length and the wind velocity should not be stronger than 10 m/s.

• 한국가시화정보학회지
• /
• 제2권2호
• /
• pp.66-72
• /
• 2004

The heat transfer and pressure drop characteristics of $CO_{2}$ are substantially different from those for CFC and HCFC refrigerants. In addition, geometric effects on two-phase flow patterns of $CO_{2}$ are also very significant in many respects. Therefore, two-phase flow patterns of $CO_{2}$ in a narrow rectangular channel or a small diameter tube whose gap size or hydraulic diameter is less than 2 mm are very important to understand heat transfer characteristics and to develop an appropriate heat transfer correlation. In the present study, the evaporation process of $CO_{2}$ in a narrow rectangular channel is visualized at various test conditions, and then the effects of operating conditions are analyzed.