• Journal of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.575-581
• /
• 1985

Ultraviolet spectrophotometric investigations have been carried out on the systems of benzene, naphthalene and phenanthrene with iodine in carbon tetrachloride. The results reveal the formation of the one to one molecular complexes. The equilibrium constants were obtained in consideration of that absorption maxima due to the formation of the charge transfer complexes shift to blue with increasing temperature. Thermodynamic parameters for the formation of the charge transfer complexes were calculated from these values. These results indicate that the stabilities of the complexes formed between polynuclear aromatics and iodine increase with the number of aromatic rings. This may be a measure of the relative basicities of polynuclear aromatics toward iodine, which is explained in terms of the resonance of the interaction between aromatics and iodine. The results in this study were, additionally, compared with those of the polymethylbenzene series to be discussed the reason for them.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.10 no.S_3
• /
• pp.113-119
• /
• 2001

Surface sediments(0~5 cm) were sampled from 22 stations in Ulsan Bay, one of the most highly industrialized regions in Korea, in November 2000. The sediment samples were analyzed for their polycyclic aromatic hydrocarbon(PAH) content using a gas chromatography coupled to a mass spectrometer detector(GC/MSD). The total PAH concentrations in the sediments varied from 14 to 7108 ng/g dry weight with a mean value of 1052 ng/g dry weight. The level of carcinogenic PAHs ranged from 6 to 2396 ng/g dry weight with a mean value of 433 ng/g dry weight. The highest PAH concentrations in the sediments from Ulsan Bay were found at Station U8, whereas the lowest levels were observed at Stations U2 and U 17. The PAH distribution exhibited a decreasing gradient from the inner basin to the outer bay. The predominant contributors to the aromatic ring groups of the 16 PAHs were four- and five-ring groups, such as fluoranthene, pyrene, benzo[a]anthracene, chrysene, benzor[b]fluoranthene, benzor[k]fluoranthene and benzo[a]pyrene, while two- and three-ring aromatics, like naphthalene, acenapthylene, acenaphthene, fluorene, phenanthrene and anthracene, only exhibited a low concentration. The molecular indices for phenanthrene/anthracene and fluoranthen/pyrene were used to Identify the origin of the PAH contamination in the sediments. The results indicated that the PAH contamination in Ulsan Bay was mostly Pyrolytic in origin with a Petrogenic input adjacent to Ulsan and Jangsuengpo harbor.

• The KSFM Journal of Fluid Machinery
• /
• v.9 no.1 s.34
• /
• pp.25-31
• /
• 2006

The present study investigates the effects of bleed flow on heat/mass transfer and pressure drop in a rotating channel with transverse rib turbulators. The hydraulic diameter $(D_h)$ of the square channel is 40.0mm. The bleed holes are located between the rib turbulators on leading surface and the hole diameter (d) is 4.5 mm. The square rib turbulators are installed on both leading and trailing surfaces. The rib-to-rib pitch is 10.0 times of the rib height(e) and the rib height-to-hydraulic diameter ratio $(e/D_h)$ is 0.055. The tests were conducted at various rotation numbers (0, 0.2, 0.4), while the Reynolds number and the rate of bleed flow to main flow (BR) were fixed at 10,000 and $10\%$, respectively. The results suggest that the heat/mass transfer characteristics in the internal cooling passage are influenced by rib turbulators, bleed flow and the Coriolis force induced by rotation. For the rotating ribbed passage with bleed flow, the heat/mass transfer on the leading surface is hardly affected by bleed flow, but that on the trailing surface decreases due to the diminution of main flow. The results also show that the friction factor decreases with the bleed flow.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.57-60
• /
• 2007

This study is to discuss the effect of the liquid type high early strength agent considering early strength, developing strength, and economics of the concrete using admixtures. The powder type high early strength agent does not helpful because the field application is not available such as the problem of mixing process and rack of economics. To make up these subjects, the plain mixture contains the standard type AE water reducing agent, and the types of the agents are the standard type AE water reducing agent(P),liquid type high early strength agent(AD),poly carboxylate high early strength type AE water reducing agent(E1), and naphthalene + melamine high early strength type AE water reducing agent(E2). As the Contents of the agents, E1 and E2 is two types each cases, and P is one type to satisfy the target fluidity and air content, AD is three types as 0.5, 1.0,and 1.5%. In the case that AD is mixed, the fluidity is decreased, but air content is increased. For increasing strength of the early age, using OPC is more effective than FA and BS for increasing the early strength of the concrete, and if the air content is secure as plain, the effect of the developing strength can be increased because the air content is increased about 2% in the case that AD is used.

• Korean Journal of Microbiology
• /
• v.28 no.3
• /
• pp.236-242
• /
• 1990

To develop the new strains of microorganisms having the degradative ability for various aromatic hydrocarbons, the hybrid plasmid pKG2 having the 2,4-Dichlorophenoxyacetic acid(2,4-D) degradative genes, the hybrid plasmid pKG3 containg the naphthalene degradative genes and TOL plasmid were introduced into Pseudomonas putida KUD 12 and P. putida KUP 10 by transformation or conjugation which originally have the degradative ability of the synthetic surfactants and phthalate esters, respectively. From P. putida KUD12, the new strains of P. putida KUD101(pKG2), KUD102(pKG3), KUD103(TOL), and KUD202(pKG3, TOL) were obtained, and KUD106(pKG2), KUD107(pKG3), KUD108(TOL) were originated from the P.putida KUP10. The degradative abilities in P. putida KUD101, KUD102 and KUD107 were similar with those of the original strains. The P. putida KUD103, KUD106 and KUD202 had a little lower and P. putida KUD108 had a better degradative abilitie than those of the original ones. In the case of mixed cultures, the mixed culture of KUD107 and KUD108 had a better degradative abilities than those of the other mixed cultures.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.2
• /
• pp.192-200
• /
• 2016

A characteristics of microwave drying-gasification was analyzed for converting a dewatered sewage sludge generated a wastewater treatment plant. Gas (60%) was the largest component of the product of microwave gasification, followed by sludge char (33%) and tar (2%). The main components of the producer gas were hydrogen (33%) and carbon monoxide (40%), and there was some methane and hydrocarbons ($C_2H_4$, $C_2H_6$, $C_3H_8$). Larger nitrogen and smaller oxygen amounts were generated. Gravimetric tar generated $414g/m^3$. This means a total tar which is a heavy hydrocarbons from the volatile organic substance in the sewage sludge. Selected light tars were benzene, anthracene, naphthalene, pyrene, showing lower concentrations as 2.62, 0.37, 0.49, $0.28g/m^3$, respectively. Sludge char has larger meso pores which is a mean pore size of $50.85{\AA}$ and has high adsorptivity. An amount of adsorption was $228.71cm^3/g$, showing higher quantity than acommercial adsorbers. This indicates that the gas obtained from the microwave gasification of wet sewage sludge can be used as fuel, but the heavy tar in the gas must be treated. Sludge char can be used as a tar reduction adsorbent in the process, and then burns as a solid fuel.

• Journal of Environmental Science International
• /
• v.2 no.1
• /
• pp.57-68
• /
• 1993

Polycyclic aromatic hydrocarbons (PAMs) are ubiquitous contaminants in marine environments. PAHs enter estuarine and nearshore marine environment via several routes such as combustion of fossil fuels, domestic and industrial effluents and oil spills PAHs have been the focus of numerous studies in the world because they owe potentially carcinogenic, mutagenic, and teratogenic to aquatic organisms and humans from consuming contaminated food. However, one can hardly find any available data on PAM content in marine organisms in Korea. The present study was carried out in order to determine PAH content in oysters from the intertidal and subtidal zones of Chinhae Bay, which is located in near urban communities and an industrial complex, and the bay is considered to be a major repositories of PAHs. 16 PAHs were analyzed by High Performance Liquid Chromatography (HPLC) with uv/vis and fluorescence detectors in oysters: they are naphthalene (NPTHL), acenaphthylene (ANCPL), acenaphthene (ACNPN), fluorene (FLURN), phenanthrene (PKEN), anthracene (ANTHR), fluoranthene (FLRTH), pyrene (PYRf), benzo(a)anthracene (BaA), chrysene (CHRY), benzo(b)- fluoranthene (BbF), benzo(k)fluoranthene (BkF), benzo(a)pyrene (BaP), dibenz(a, h)anthracene (DhA), benzo(g, h, i)peryne (Bghip) and indeno(1, 2, 3, -cd)pyrene (I123cdP). The PAH contents in oysters from the intertidal and subtidal zones of Chinhae Bay ranged from < 0.1 to 992.0 $\mu\textrm{g}$/kg (mean 69.8 $\pm$ 9.8 $\mu\textrm{g}$/kg). Key words . polycyclic aromatic hydrocarbon, high performance liquid chromatography, oyster, Chinhae Bay.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.789-798
• /
• 1989

A naphthalene sublimation technique based on the heat/mass transfer analogy is used to investigate the circumferential mass transfer from a circular cylinder in an approaching uniform shear flow. Experiments are performed in a wind tunnel (450*450m $m^{2}$ with a shear flow generator which is specially manufactured for generating variable shear rates(S). The effects of an approaching shear flow are correlated with mass transfer coefficients. It is found that the local mass transfer rate on a circular cylinder is characterized with the shear parameter $K^{d}$ defined as Sd/ $U^{c}$ , where d is the radius of cylinder and $U^{c}$ is the approaching velocity at the center of cylinder. The angle on the corresponding to minimum Sherwood number is approximately proportional to the shear parameter on an upper and down number is approximately proportional to the shear parameter on an upper and down circular cylinder (0< $K^{d}$ <0.132). Changes on the averaged mass transfer rate are not significant for small $K^{d}$ , which are slightly proportional to K$d^{2}$ but the local mass transfer rates are significantly changed with the approaching shear flow.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.5
• /
• pp.20-30
• /
• 2012

In case of analyzing PAHs (EPA 16 compounds) in oil-contaminated soils, the lump of peaks may occur because of the aliphatic and polar compounds in oil. This phenomenon is due to the lower accuracy of the analysis. To solve this problem, evaluation of application of silicagel-alumina multi-layer fraction was performed using standard substances and oil-contaminated soils. As a result of application of silicagel-alumina multi-layer fraction cleanup method using standard substances, recovery rates of surrogate standards (5 compounds including Naphthalene-d8) were 83~100% and those of target standards were 75~129%. These were to meet the target values (60~130%) in this study. When used 4% water-silicagel column analyze PAHs in oil-contaminated soils, Some problems were generated for quantitative analysis of PAHs; concentration of PAHs was underestimated due to an upward baseline of internal standard (recovery rate: less than 60%) and overestimated by the lump of peaks which were not purified (the biggest recovery rate: more than 400%). On the other hand, in case of silicagel-alumina multi-layer fraction cleanup method, recovery rate of surrogate standards were 61~101.6%. Therefore this cleanup method was considered a valid method to improve accuracy of analysis of PAHs in oil-contaminated soils.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.6
• /
• pp.673-682
• /
• 2016

In this study, we investigated influent and effluent water pollutants in 53 Public Sewage Treatment Works (PSTWs) where industrial wastewater or landfill leachate is combined four times for two years from 2014 to 2015. Also, we analyzed the characteristics of heavy metals and volatile organic carbons at influent and effluent of these PSTWs caused by sewage treatment combined with industrial wastewater or landfill leachate. As a result, six heavy metals such as barium, copper, iron, manganese, nickel and zinc, and four volatile organic carbons (VOCs) including phenols, di(2-)ethylhexyl phthalate (DEHP), formaldehyde and toluene were observed above detection limits in most of PSTWs. Also, it was revealed that six heavy metals such as hexavalent chromium, mercury, cadmium, chromium, nickel and selenium, and four VOCs including 1,1-dichloroethylene, vinyl chloride, naphthalene, and epichlorohydrin were observed more frequently according to precipitation. As a result of reviewing the monitoring data on "Water Quality Monitoring Networks" in lower watersheds of PSTWs, both heavy metals and VOCs were below detection limits, indicating that the effluent water had little influence on the watershed. Nevertheless for the better management of influent and effluent pollutants in PSTWs, it is necessary to establish the advanced management plans for water pollutants in PSTWs, which include a list of priority substances management, monitoring plans, and guidelines for industrial wastewater and landfill leachate combined in PSTWs.