• Bulletin of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.348-354
• /
• 2009

Copper(II) complexes with tetraoxo dithia tetraaza macrocyclic ligands; [18]ane$N_4S_2$: 1,4,10,13-tetraaza-5,9,14,18-tetraoxo-7,16-dithia-cyclooctadecane, [20]ane$N_4S_2$: 1,5,11,15-tetraaza-6,10,16,20-tetraoxo-8,18-dithia-cyclocosane,Bzo2[18]ane$N_4S_2$: dibenzo-1,4,10,13-tetraaza-5,9,14,18-tetraoxo-7,16-dithia-cyclooctadecane, Bzo2[20]ane$N_4S_2$: dibenzo-1,5,11,15-tetraaza-6,10,16,20-tetraoxo-8,18-dithia-cyclocosane; were entrapped in the nanopores of zeolite-Y by a two-step process in the liquid phase: (i) adsorption of [bis(diamine)copper(II)] (diamine = 1,2-diaminoethane, 1,3-diaminopropane, 1,2-diaminobenzene, 1,3-diaminobenzene); $[Cu(N-N)_2]^{2+}$-NaY; in the nanopores of the zeolite, and (ii) in situ template condensation of the copper(II) precursor complex with thiodiglycolic acid. The obtained complexes and new host-guest nanocomposite materials; $[Cu([18]aneN_4S_2)]^{2+}-NaY,\;[Cu([20]aneN_4S_2)]^{2+}-NaY,\;[Cu(Bzo_2[18]aneN_4S_2)]^{2+}-NaY,\;[Cu(Bzo_2[20]aneN_4S_2)]^{2+}$-NaY; have been characterized by elemental analysis FT-IR, DRS and UV-Vis spectroscopic techniques, molar conductance and magnetic moment data, XRD and, as well as nitrogen adsorption. Analysis of data indicates all of the complexes have been encapsulated within nanopore of zeolite Y without affecting the zeolite framework structure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.372.2-372.2
• /
• 2016

Various nanobiosensors have been developed and extensively investigated. For their practical applications, however, the reproducibility and uniformity should be good enough and the mass-production should be possible. To fabricate anodized aluminium oxide (AAO)-based nanobiosesnor on wafer scale, we have designed and constructed a wafer-scale anodizing system. $1{\mu}m$-thick-aluminum is deposited on 4 inch SiO2/Si substrate and then anodized, resulting in uniform nanopores with an average pore diameter of about 65 nm. Furthermore, most AAO sensors constructed on this wafer provide capacitance values of 30 nF ~ 60 nF in PBS, demonstrating their uniformity.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.3
• /
• pp.225-230
• /
• 2016

Since the development of anodic aluminum oxide (AAO), extensive studies have been conducted ranging from fundamental research to the applications of AAO. Most of the research on AAO structures have focused on well-aligned nanoporous structures fabricated under specific conditions. This study investigated fabricable AAO structures with anodization performed with various temperatures, electrical potentials, and basal plane surfaces. As a result, nanoporous and nanofibrous structures were fabricated. The nanopores were formed at a relatively lower temperature and potential, and the nanofibers were formed at a relatively higher temperature and potential regardless of the basal plane surface. The shape of the base surface was found to influence the structural arrangement in nanoporous morphologies. These interesting findings relating to new morphologies have the potential to broaden the possible applications of AAO materials.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.3
• /
• pp.203-206
• /
• 2007

Electrochemical reaction of glucose was regulated by the electrochemically active area of nanoporous platinum, which is controlled by ionic strength. The profile of the oxidation current of glucose vs. ionic strength was identical with that of the electrochemically active area. This result confirms that the nanopores are virtually opened for the electrochemical reaction of glucose when the ionic strength climbs over a specific concentration and implies that the electrochemical reactions on nanoporous electrode surfaces can be controlled by concentration of electrolyte.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.12
• /
• pp.4392-4396
• /
• 2011

Porous silicon with a complex network of nanopores is utilized for photoelectrochemical energy conversion. A novel electroless Pt deposition onto porous silicon is investigated in the context of photoelectrochemical hydrogen generation. The electroless Pt deposition is shown to improve the characteristics of the PS photoelectrode toward photoelectrochemical $H^+$ reduction, though excessive Pt deposition leads to decrease of photocurrent. Furthermore, it is found that a thin layer (< 10 ${\mu}m$) of porous silicon can serve as anti-reflection layer for the underlying Si substrate, improving photocurrent by reducing photon reflection at the Si/liquid interface. However, as the thickness of the porous silicon increases, the surface recombination on the dramatically increased interface area of the porous silicon begins to dominate, diminishing the photocurrent.

• Journal of Integrative Natural Science
• /
• v.2 no.3
• /
• pp.211-214
• /
• 2009

A new porous silicon (PSi) microcavity sensor for the detection of volatile organic compounds (VOCs) was developed. PSi microcavity sensor exhibiting unique reflectivity was successfully obtained by an electrochemical etching of silicon wafer. When PSi was fabricated into a structure consisting of two high reflectivity muktilayer mirrors separated by an active layer, a microcavity was formed. This PSi microcavity is very sensitive structures. Reflection spectrum of PSi microcavity indicated that the full-width at half-maximum (FWHM) was of 10 nm and much narrower than that of fluorescent organic molecules or quantum dot. The detection of volatile organic compounds (VOCs) using PSi microcavity was achieved. When the vapor of VOCs condensed in the nanopores, the refractive indices of entire particle increased. When PSi microcavity was exposed to acetone, ether, and toluene, PSi microcavity in reflectivity was red shifted by 28 nm, 33 nm, and 20 nm for 2 sec, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.1
• /
• pp.17-26
• /
• 2006

We have shown that zeolite microcrystals can be readily organized in the form of uniformly oriented monoand multilayers on various substrates by well-defined chemical linkages based on covalent, ionic, and hydrogen bondings between the microcrystals and the substrates. This finding establishes the fact that micrometer-scale building blocks can be readily organized into organized entities through interconnection of the surface-tethered large number of functional groups. Since zeolite crystals have highly regular and uniform nanochannels and nanopores within them, the resulting mono and multilayers of zeolite microcrystals bear great potential to be utilized in various novel applications.

• Journal of Sensor Science and Technology
• /
• v.29 no.6
• /
• pp.374-381
• /
• 2020

Hydrogen gas has attracted considerable attention as a promising candidate for future energy resources because of its eco-friendly characteristics; however, its highly combustible characteristics should be thoroughly examined to preclude potential disasters. In this regard, a highly sensitive method for the selective detection of H₂ is extremely important. To achieve excellent H₂ selectivity, the utilization of a metal-organic framework (MOF) membrane can physically screen interfering gas molecules by restricting the size of kinetic diameters that can penetrate its nanopores. This paper summarizes the various endeavors of researchers to utilize the MOF molecular sieving layer for the development of highly selective H₂ sensors. Further, the review affords useful insights into the development of highly reliable H₂ sensors.

• Entomological Research
• /
• v.48 no.6
• /
• pp.480-489
• /
• 2018

Due to the increasing interest in natural biopolymers including chitin, the exploitation of economic and easily accessible chitin sources with good physicochemical properties is nowadays required. In view of this fact, in the current study chitin was extracted and physicochemically characterized from six Cicadas (Hemiptera: Homoptera: Cicadoidea) species collected from Mediterranean region of Turkey (2014-15). Chitin was extracted using a classic extraction method that includes acid and base treatment. TGA results revealed a remarkable increase ($410-412^{\circ}C$) for all the six Cicada species compared to other chitin samples extracted from various sources. For all of the six selected species the chitin contents on the dry basis were determined as 6.7% for Cicadatra atra, 5.51% for C. hyalina, 8.84% for C. platyptera, 4.97% for Cicada lodosi, 6.49% for C. mordoganensis, and 5.88% for Cicadetta tibialis. The surface morphology of chitin isolates from Cicada species was observed to consist of nanofibers and nanopores.

• Carbon letters
• /
• v.10 no.3
• /
• pp.177-180
• /
• 2009

The importance of nanopore structures of carbons is shown in terms of interaction potential for various molecules including supercritical gases such as $H_2$ and $CH_4$. The key factors for adsorption of supercritical $H_2$ and $CH_4$ are shown for single wall carbon nanohorn, single wall carbon nanotube, and double wall carbon nanotube. The cluster formation of molecules is a key process for water adsorption on hydrophobic carbon nanopores. The X-ray absorption spectroscopic examination elucidates an explicit dehydration structure of ions confined in carbon nanopores.