• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.386-389
• /
• 1999

Amphoteric polymers have brought to papermakers' attention gradually. In this paper, a series of amphoteric starches with different cationic and anionic degree of substitution (DS) are prepared. Better product has been selected and used under different condition. As retention and drainage aids, amphoteric starches were used in shorter fiber length, weak strength and poor drainage bleached AQ-Soda wheat straw pulp. In neutral and alkaline papermaking system, when amphoteric starches contain 0.024-0.026 anionic degree of substitution (DS), it is shown that the higher the cationic degree of substitution (DS) in amphoteric starches, the better the filler retention. The filler retention is improved 12.5%, 30.3%, and 35.1% and 32.5% respectively by adding 1% amphoteric starch LS-L2 -1 (0.034), LS-L2-2 (0.040), LS-L2-3 (0.047) and LS-L2-4 (0.052). But the strength of handsheets if affected a little. By adding 2% Al2 (SO4)3 and 1.5% LS-L2-3 at pH 7.5, filler retention can be improved from 38% to 80%, and breaking length of sheet only decreases 3.2%. As dry strengthening aids, amphoteric starches were used in eucalyptus APMP. Amphoteric starches are used in eucalyptus APMP. The amphoteric starch LS-L2-2 is better dry strength aid. Adding 1% LS-L2-2 can improve breaking length 24.5%, burst index 42.9%, tear index 38.8%, folding endurance and density of the handsheets.

• Research in Plant Disease
• /
• v.12 no.3
• /
• pp.298-302
• /
• 2006

An isolate of Cucumber mosaic virus(CMV), called as Can-CMV, was originally isolated from Canna generalis showing typical streak mosaic foliar symptoms, and its properties were investigated in this study. Whereas all known isolates of CMV could induce symptoms on their systemic hosts(four kinds of Nicotiana spp and a zucchini squash), Can-CMV induced no symptoms on its systemic hosts tested. Replication and movement of the virus on upper leaves as well as inoculated leaves-were confirmed by RT-PCR suggesting that Can-CMV could only infect systemically on N. benthamiana and N. glutinosa. Size of local lesions on the Can-CMV-inoculated leaves of Chenopodium amaranticolor was much smaller than that of Fny-CMV. Whereas Fny-CMV and LS-CMV could induce distinct necrotic local lesions on Vigna unguiculata 2 to 3 days postinoculation(dpi), chlorotic spots symptom was expressed by Can-CMV 4 to 5 dpi. Virus-specific 4 kinds of dsRNAs were isolated from leaves of N. benthamiana infected with Can-CMV, and these dsRNAs corresponded to the viral genomic RNAs and subgenomic RNAs and their patterns were indistinguishable to those of Fny-CMV and LS-CMV. By restriction mapping analysis of 950 bp of RT-PCR amplified products of coat protein gene of the virus as well as by serological analysis of gel diffusion test, Can-CMV belongs to a typical member of CMV subgroup IA. These results suggest that the Can-CMV isolated from C. generalis possesses unique pathological properties to understand further insight into the various interactions between virus and host.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1992.06a
• /
• pp.149-152
• /
• 1992

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.02a
• /
• pp.131-131
• /
• 1999

• Journal of applied mathematics & informatics
• /
• v.13 no.1_2
• /
• pp.501-508
• /
• 2003

Although the estimate of regression function is important, some have focused the variance estimation of error term in regression model. Different variance estimators perform well under different conditions. In many practical situations, it is rather hard to assess which conditions are approximately satisfied so as to identify the best variance estimator for the given data. In this article, we suggest SHM estimator compared to LS estimator, which is common estimator using in parametric multiple regression analysis. Moreover, a combined estimator of variance, VEM, is suggested. In the simulation study it is shown that VEM performs well in practice.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.109-112
• /
• 2001

Recently, as demands for super-high speed broad band wireless multimedia service increase, variable researches to develop wireless LAN have been carried out. In this paper, we propose and analyze LS(Least Squares)-PSA(Pilot Symbol Assisted) equalizer which compensates for each subcarrier of different attenuations and phase response for OFDM(Orthogonal Frequency Division Multiplexing)-based indoor wireless LAN systems. The proposed equalizer enhances the $E_{b}$ $N_{o}$ performance of 3dB and 4dB at BER=10$^{-2}$ as compared with LS equalizer in AWGN channel and indoor wireless channel respectively..

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.2
• /
• pp.63-70
• /
• 2006

The purpose of this study was to develop the stability index of landfill sites to assess it's degree of stability. In order to develop the stability index, field data including leachate qualities, Landfill gas (LFG) composition and element composition of wastes from 50 closed landfills were collected. Three parameters-BOD/CODcr among leachate quality parameters, $CH_4$ among landfill gases, and C/N ratio from wastes-were found to be the best parameters for measuring the stability of landfill sites. The trend line of these parameters were used to Also, $CH_4$ from landfill gases and C/N ratio from wastes were found to be the best parameters. The trend lines of these parameters were used to develop the stability index of landfill sites. The equation for the index was as following; $I_{LS}=S_L+S_G+S_W$ $S_L=-\{4.892+16.587{\cdot}ln[BOD/COD_{Cr]\}$ $S_G=53.872-12.782{\cdot}ln[CH_4]$ $S_W=79.382-20.013{\cdot}ln[C/N]$ (The maximum score for $S_L$, $S_G$, and $S_W$ was 33.3.) where, $I_{LS}$ : The stability index of the landfill $S_L$ : The stability score of the leachate $S_G$ : The stability score of the landfill gas $S_W$ : The stability score of the waste.

• Journal of computational fluids engineering
• /
• v.9 no.3
• /
• pp.73-80
• /
• 2004

A LS(Level Set) formulation is developed for computing two-phase flows on non- orthogonal meshes. Compared with the VOF(Volume-of-Fluid) method based on a non-smooth volume-fraction function, the LS method can calculate an interfacial curvature more accurately by using a smooth distance function. Also, it is quite straightforward to implement for 3-D irregular meshes compared with the VOF method requiring much more complicated geometric calculations. The LS formulation is implemented into a general purpose program for 3-D flows and verified through several test problems.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.154-157
• /
• 2006

지중 전력케이블의 접속함은 금속보호관(Casing or Protective Tube)의 전기적 검토를 통해서 적정 단면적을 산정하여 고장시 고장전류론 흘려주어야 한다. 현재 국내외 금속보호관은 그 재료로서 Copper를 사용하고 있으나 현장에서의 시공성 및 취급 용이성 때문에 알루미늄 보호관으로 재질 변경이 이루어지고 있다. 본 논문에서는 기존의 Copper보호관과 Aluminium보호관에서의 비교검토를 통해서 Aluminium보호관의 유효성을 검토하고 구리에서 알루미늄으로 재질 변경이 이루어 졌을 때 열적 제약조건을 고려하여 적정단면적을 재 산정한다. 또한 산정된 단면적은 단락시험을 통해서 그 유효성을 입증하였다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.129-130
• /
• 2010

For the high power demand and N+1 redundancy, this paper presents the digital load share (LS) controller design and the implementation of paralleled phase-shifted full-bridge converters (PSFBC) used in distributed power systems. By adopting the digital control strategy, separately used ICs for PSFBC and LS control functions in analog systems can be merged into a cost-effective digital controller. To compensate and stabilize both PSFBC and LS loops with the direct digital design approaches, small-signal model of the system is derived in discrete-time domain. The steady-state and dynamic load sharing performances are also investigated. Experimental results from two 1.2 kW paralleled PSFBC modules are shown to verify the proposed work.