• Korean Journal of Materials Research
• /
• v.20 no.1
• /
• pp.25-30
• /
• 2010

Si nanowire/multiwalled carbon nanotube nanocomposite arrays were synthesized. Vertically aligned Si nanowire arrays were fabricated by Ag nanodendrite-assisted wet chemical etching of n-type wafers using $HF/AgNO_3$ solution. The composite structure was synthesized by formation of a sheath of carbon multilayers on a Si nanowire template surface through a thermal CVD process under various conditions. The results of Raman spectroscopy, scanning electron microscopy, and high resolution transmission electron microcopy demonstrate that the obtained nanocomposite has a Si nanowire core/carbon nanotube shell structure. The remarkable feature of the proposed method is that the vertically aligned Si nanowire was encapsulated with a multiwalled carbon nanotube without metal catalysts, which is important for nanodevice fabrication. It can be expected that the introduction of Si nanowires into multiwalled carbon nanotubes may significantly alter their electronic and mechanical properties, and may even result in some unexpected material properties. The proposed method possesses great potential for fabricating other semiconductor/CNT nanocomposites.

• Journal of Surface Science and Engineering
• /
• v.41 no.1
• /
• pp.12-15
• /
• 2008

The zinc oxide(ZnO) nanowires were deposited on Si(001) substrates by thermal chemical vapour deposition without any catalysts. SEM data suggested that the grown nanostructures were the well-aligned ZnO single crystals with preferential orientation. Back-gate ZnO nanowire field effect transistors(FET) were successfully fabricated using a photolithography process. The fabricated nanowire FET exhibits good contact between the ZnO nonowire and Au metal electrodes. Based on I-V characteristics it was found out that the ZnO nanowire revealed a characteristic of n-type field effect transistor. The drain current increases with increasing drain voltage, and the slopes of the $I_{ds}-V_{ds}$ curves are dependent on the gate voltage.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.289-289
• /
• 2013

While there are plenty of studies on synthesizing semiconducting germanium nanowires (Ge NWs) by vapor-liquid-solid (VLS) process, it is difficult to inject dopants into them with uniform dopants distribution due to vapor-solid (VS) deposition. In particular, as precursors and dopants such as germane ($GeH_4$), phosphine ($PH_3$) or diborane ($B_2H_6$) incorporate through sidewall of nanowire, it is hard to obtain the structural and electrical uniformity of Ge NWs. Moreover, the drastic tapered structure of Ge NWs is observed when it is synthesized at high temperature over $400^{\circ}C$ because of excessive VS deposition. In 2006, Emanuel Tutuc et al. demonstrated Ge NW pn junction using p-type shell as depleted layer. However, it could not be prevented from undesirable VS deposition and it still kept the tapered structures of Ge NWs as a result. Herein, we adopt $C_2H_2$ gas in order to passivate Ge NWs with carbon sheath, which makes the entire Ge NWs uniform at even higher temperature over $450^{\circ}C$. We can also synthesize non-tapered and uniformly doped Ge NWs, restricting incorporation of excess germanium on the surface. The Ge NWs with carbon sheath are grown via VLS process on a $Si/SiO_2$ substrate coated 2 nm Au film. Thin Au film is thermally evaporated on a $Si/SiO_2$ substrate. The NW is grown flowing $GeH_4$, HCl, $C_2H_2$ and PH3 for n-type, $B_2H_6$ for p-type at a total pressure of 15 Torr and temperatures of $480{\sim}500^{\circ}C$. Scanning electron microscopy (SEM) reveals clear surface of the Ge NWs synthesized at $500^{\circ}C$. Raman spectroscopy peaked at about ~300 $cm^{-1}$ indicates it is comprised of single crystalline germanium in the core of Ge NWs and it is proved to be covered by thin amorphous carbon by two peaks of 1330 $cm^{-1}$ (D-band) and 1590 $cm^{-1}$ (G-band). Furthermore, the electrical performances of Ge NWs doped with boron and phosphorus are measured by field effect transistor (FET) and they shows typical curves of p-type and n-type FET. It is expected to have general potentials for development of logic devices and solar cells using p-type and n-type Ge NWs with carbon sheath.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.427-427
• /
• 2012

Ferroelectric-gate field effect transistor based memory using a nanowire as a conducting channel offers exceptional advantages over conventional memory devices, like small cell size, low-voltage operation, low power consumption, fast programming/erase speed and non-volatility. We successfully fabricated ferroelectric nonvolatile memory devices using both n-type and p-type Si nanowires coated with organic ferroelectric poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] via a low temperature fabrication process. The devices performance was carefully characterized in terms of their electrical transport, retention time and endurance test. Our p-type Si NW ferroelectric memory devices exhibit excellent memory characteristics with a large modulation in channel conductance between ON and OFF states exceeding $10^5$; long retention time of over $5{\times}10^4$ sec and high endurance of over 105 programming cycles while maintaining ON/OFF ratio higher $10^3$. This result offers a viable way to fabricate a high performance high-density nonvolatile memory device using a low temperature fabrication processing technique, which makes it suitable for flexible electronics.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.35.2-35.2
• /
• 2011

나노와이어를 제작하는 많은 방법들 중에서 실리콘 기판을 무전해식각하여 실리콘 나노와이어를 제작하는 방법은 쉽고 간단하기 때문에 최근 많은 연구가 진행되고 있다. 무전해식각법을 이용한 실리콘 나노와이어 합성은 단결정 실리콘 나노와이어를 합성할 수 있고, p 또는 n형의 도핑 정도에 따라 원하는 전기적 특성의 기판을 선택하여 제작할 수 있다는 장점을 가지고 있다. 하지만 n형으로 도핑된 기판으로 나노와이어를 제작하였을 경우 식각으로 인한 나노와이어 표면의 거칠기로 인하여, 실제로는 n형 반도체 특성을 나타내지 않는 문제점을 가지고 있다. 따라서 본 연구에서는 무전해식각법으로 합성한 n형 나노와이어의 거칠기를 조절하고 filed-effect transistor (FET) 소자를 제작하여 나노와이어의 전기적 특성변화를 확인하였다. n형 나노와이어의 거칠기를 조절하기 위하여 열처리를 통해 표면을 산화시켰고, 열처리 시간에 따른 나노와이어 FET 소자를 제작하여 I-V 특성을 관찰하였다. 이때 절연막과 나노와이어 계면 사이의 결함을 최소화 하기 위하여 나노와이어를 poly-4-vinylphenol (PVP) 고분자 절연막에 부분 삽입시켰다. 나노와이어 표면의 거칠기는 high-resolution transmission electron microscopy (HRTEM)을 통하여 확인하였으며, 전기적 특성은 Ion/Ioff ratio, 이동도, subthreshold swing, threshold voltage 값 등을 평가하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.418-418
• /
• 2008

The electrochemical etching of silicon in HF-based solutions is known to form various types of porous structures. Porous structures are generally classified into three categories according to pore sizes: micropore (below 2 nm in size), mesopore (2 ~ 50 nm), and macropore (above 50 nm). Recently, the formation of macropores has attracted increasing interest because of their promising characteristics for an wide scope of applications such as microelectromechanical systems (MEMS), chemical sensors, biotechnology, photonic crystals, and photovoltaic application. One of the promising applications of macropores is in the field of MEMS. Anisotropic etching is essential step for fabrication of MEMS. Conventional wet etching has advantages such as low processing cost and high throughput, but it is unsuitable to fabricate high-aspect-ratio structures with vertical sidewalls due to its inherent etching characteristics along certain crystal orientations. Reactive ion dry etching is another technique of anisotropic etching. This has excellent ability to fabricate high-aspect-ratio structures with vertical sidewalls and high accuracy. However, its high processing cost is one of the bottlenecks for widely successful commercialization of MEMS. In contrast, by using electrochemical etching method together with pre-patterning by lithographic step, regular macropore arrays with very high-aspect-ratio up to 250 can be obtained. The formed macropores have very smooth surface and side, unlike deep reactive ion etching where surfaces are damaged and wavy. Especially, to make vertical microwire or nanowire arrays (aspect ratio = over 1:100) on silicon wafer with top-down photolithography, it is very difficult to fabricate them with conventional dry etching. The electrochemical etching is the most proper candidate to do it. The pillar structures are demonstrated for n-type silicon and the formation mechanism is well explained, while such a experimental results are few for p-type silicon. In this report, In order to understand the roles played by the kinds of etching solution and mask patterns in the formation of microwire arrays, we have undertaken a systematic study of the solvent effects in mixtures of HF, dimethyl sulfoxide (DMSO), iso-propanol, and mixtures of HF with water on the structure formation on monocrystalline p-type silicon with a resistivity with 10 ~ 20 $\Omega{\cdot}cm$. The different morphological results are presented according to mask patterns and etching solutions.