• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.4
• /
• pp.340-344
• /
• 2011

Thermoelectric bismuth telluride ($Bi_2Te_3$) films were deposited on $4^{\circ}$ off oriented (001) GaAs substrates using a modified metal organic chemical vapor deposition (MOCVD) system. The effects of substrate temperature on surface morphologies, crystallinity, electrical properties and thermoelctric properties were investigated. Two dimensional growth mode (2D) was observed at substrate temperature lower than $400^{\circ}C$. However, three dimensional growth mode (3D) was observed at substrate temperature higher than $400^{\circ}C$. Change of growth mechanism from 2D to 3D was confirmed with environmental scanning electron microscope (E-SEM) and X-ray diffraction analysis. Seebeck coefficients of all samples have negative values. This result indicates that $Bi_2Te_3$ films grown by modified MOCVD are n-type. The maximum value of Seebeck coefficient was -225 ${\mu}V/K$ and the power factor was $1.86{\times}10^{-3}\;W/mK^2$ at the substrate temperature of $400^{\circ}C$. $Bi_2Te_3$ films deposited using modified MOCVD can be used to fabricate high-performance thermoelectric devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.178-178
• /
• 2007

II-VI의 넓은 밴드갭 (3.37 eV)을 가지는 ZnO는 solar cells, transparent conductive electrodes, ultraviolet light emitters, and chemical sensors 등에 응용되고 있다. 특히 고효율 ZnO계 발광 소자 구현을 위하여 MgO (7.7eV), CdO (2.0eV) 등의 고용을 통한 밴드갭을 엔지니어링 하며, 단파장 영역의 광원을 확보하기 위하여 MgO 첨가를 통한 밴드갭 에너지를 증가시키는 방향으로의 연구가 활발하다. 그러나 ZnO의 wurtzite 구조와 MgO의 rocksalt 구조의 상이한 결정구조로 인하여 Mg의 고용한계는 4 at. %, 4.1 eV 알려져 있다. 본 실험에서는 p-type Si (100), c-sapphire (0002)과 GaN 기판 위에 MgO (99.999 %)와 ZnO (99.999 %) 두가지 타겟을 사용하여 RF co-스퍼터링법으로 ZnMgO 박막을 증착 하였다. 이때 ZnO 타겟의 power 밀도는 고정 시키고 MgO 타겟의 power 밀도를 변화 시키며 Mg의 함량을 조절하여 그에 따른 광학적 구조적 특성의 변화를 연구 하였다. 성장된 ZnMgO 박막은 MgO 타겟의 power 밀도가 증가할 때 Mg의 함량이 10 at. %까지 증가 하며, 그에 따른 표면의 거칠기 및 입계 크기가 감소하며, 박막의 성장속도 또한 감소함을 SEM과 AFM을 통하여 알 수 있었다. XRD를 동하여 ZnMgO 박막의 (0002) peak의 위치는 $34.50^{\circ}{\sim}34.7^{\circ}$로 오른쪽으로 이동하며, c-축으로 성장하였음을 알 수 있다. PL과 UV룰 동하여, Mg의 함량이 증가 할수록 박막의 밴드갭 에너지는 3.2 eV에서 4.1 eV 로 증가하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.145-145
• /
• 2010

In this paper, we report that the effects of hydrogen doping on the electrical and optical properties of typical transparent conducting oxide films such as ZnO and $SnO_2$ prepared by magnetron sputtering. Recently, density functional theory (DFT) calculations have shown strong evidence that hydrogen acts as a source of n-type conductivity in ZnO. In this work, the beneficial effect of hydrogen incorporation on Ga-doped ZnO thin films was demonstrated. It was found that hydrogen doping results a noticeable improvement of the conductivity mainly due to the increases in carrier concentration. Extent of the improvement was found to be quite dependent on the deposition temperature. A low resistivity of $4.0{\times}10^{-4}\;{\Omega}{\cdot}cm$ was obtained for the film grown at $160^{\circ}C$ with $H_2$ 10% in sputtering gas. However, the beneficial effect of hydrogen doping was not observed for the films deposited at $270^{\circ}C$. Variations of the electrical transport properties upon vacuum annealing showed that the difference is attributed to the thermal stability of interstitial hydrogen atoms in the films. Theoretical calculations also suggested that hydrogen forms a shallow-donor state in $SnO_2$, even though no experimental determination has yet been performed. We prepared undoped $SnO_2$ thin films by RF magnetron sputtering under various hydrogen contents in sputtering ambient and then exposed them to H-plasma. Our results clearly showed that the hydrogen incorporation in $SnO_2$ leads to the increase in carrier concentration. Our experimental observation supports the fact that hydrogen acting as a shallow donor seems to be a general feature of the TCOs.

• Journal of the Optical Society of Korea
• /
• v.16 no.4
• /
• pp.349-353
• /
• 2012

Uniform spreading of injection current in light-emitting diodes (LEDs) is one of the crucial requirements for better device performances. It is reported that non-uniform current spreading leads to low output power, high current crowding, heating, and reliability degradation of the LED device. This paper reports on the effects of different surface and electrode geometries in the LEDs. To increase the output power of LEDs and reduce the series resistance, a rectangular-type LED (RT-LED) with a centered island cathode has been fabricated and investigated by comparison with a conventional LED (CV-LED). The performances of RT-LEDs were prominently enhanced via uniform current spreading and low current crowding. Performances in terms of increased output power and lower forward voltage of simulated RT-LEDs are much superior to those of CV-LEDs. Based on these results, we investigated the correlation between device geometries and optical characteristics through the fabricated CV and RT-LEDs. The measured output power and forward voltage of the RT-LEDs at 100 mA are 64.7% higher and 8% smaller compared with those of the CV-LEDs.

• Korean Journal of Metals and Materials
• /
• v.46 no.5
• /
• pp.289-295
• /
• 2008

The effect of the alloy elements(Si/Mn) ratio on the coating quality including wettabilty with molten zinc, galvannealing kinetics and crater has been investigated in interstitial-free high strength steel(IFHSS) containing Si and Mn. When the Si/Mn ratio was below 0.75, IF-HSS exhibited a good wettability leading to a good galvannealed coating quality after annealing at $800^{\circ}C$ for 40s in $15%H_2-N_2$ mixed gas with dew point $-60^{\circ}C$. In contrast, the wettability and galvannealed coating quality were deteriorated in the Si/ Mn ratio above 0.75. It is shown that they have relevance to oxides forms by selective oxidation on the steel surface. The oxide particles dispersed on the steel surface with a surface coverage of below 40% resulted in good wettability and galvannealed coating quality. The oxide particle is mainly consisted of $Mn_2SiO_4$ with low contact angle in molten zinc. On the other hand, the continuous oxide layer on the steel surface, such as network- and film-type,caused to poor wettability and galvannealed coating quality. The coverage of oxide layer was above 80%, and its chemical species was $SiO_2$ with high contact angle in molten zinc. Consequently, the Si/Mn alloy ratio played an importance role in galvannealed coating quality of IF-HSS.

• Elastomers and Composites
• /
• v.48 no.1
• /
• pp.61-66
• /
• 2013

A family of Cr(III) complexes supported on tridentate dibenzimidazolyl ligands having a general formula: $[N(CH_3)(CH_2)_2(Bm-R)_2]CrCl_3$ [where Bm = benzimidazolyl, R = H (3a); -Me(3b); -Bn (3c)] have been synthesized and utilized them for the trans-1,4-specific polymerizations of 1,3-butadiene (BD), activated with methylalumoxane (MAO). The activity of BD polymerizations was sensitive to the type of ligand on the Cr metal, so that the activity decreases in the order of 3a > 3c > 3b. All the catalysts combined with MAO yielded polybutadienes with perfect trans-1,4 structure with moderate molecular weight.

• Journal of Korean Medicine Rehabilitation
• /
• v.23 no.2
• /
• pp.117-128
• /
• 2013

Objectives : The purpose of this study is to explore the trends of Korean medical study on stress in the industrial worker. Methods : We received numbers of the studies about stress in the industrial worker from 6 Korean web databases, using key words such as 'Industry AND Stress', 'Oriental medicine AND Stress', 'Worker AND Stress', 'Workplace AND Stress'. We received 12 research papers and they were analyzed and the journals, the authors, the contents of 3 classification of those research papers. Results : Among them, we had 6 reviews of Dept. of preventive medicine and Dept. of third medicine, college of Korean Medicine, Won-kwang University, and the rest of them were 6 reviews. We had 4 reviews of Korean Journal of Oriental Preventive Medical Society, 2 reviews of the Journal of Traditional Korean Medicine, 2 reviews of Journal of Oriental Neuropsychiatry and so on. According to the contents of reviews, we had 7 reviews of correlation of industrial worker and stress, 4 reviews of cause on the industrial worker's stress and 1 case report. Conclusions : We reviewed the trends of Korean medical study on stress in the industrial worker. The stress in the industrial workers were related with the type of occupation, social psychology, drinking, smoking, the satisfaction of job, the harmony of organization. And we knew that the musculoskeletal pain was related to the industrial worker's stress. In the future, abundant case studies, follow-up trials and RCTs should be done about the industrial worker's stress.

• Journal of Korean Medicine Rehabilitation
• /
• v.23 no.2
• /
• pp.95-104
• /
• 2013

Objectives : The purpose of this study is to analyze internal research trends of work-related musculoskeletal disorders(WMSDs) and provide problems of researches forward. Methods : 6 Korean databases were searched for articles of WMSDs published from 2000 to 2012, and 264 research were systematic reviewed. An analytical method was used descriptive statistics, an actual number and percentage. Results : The results of distribution by year were reported more than 20 articles after 2004, and 45 articles in 2009. Industrial classification distribution of research subjects the manufacturing industry was many most at the 84. Research contents in most description were 147 whether it was risk factor and relation. Research design type of articles was most description survey research 226. In the research field 89 articles were reported to the journal related to technologies. Conclusions : It is considered to be necessary that ergonomic approach would cooperate with other approaches such as integrated health management system as well as industrial medicine considering psychosocial factors.

• Journal of Korean Medicine Rehabilitation
• /
• v.23 no.4
• /
• pp.213-223
• /
• 2013

Objectives Low back pain (LBP) is one of the most common reason for people in Korea to visit Korean medical institutions. To assess actual amounts of use in the treatment of LBP in Korean medicine and to provide objective base line data for policy decision making, research regarding the current state of LBP patients' treatment in Korean medical institutions are in need. Methods The current study was designed as a retrospective chart review to investigate descriptive characteristics of LBP patients. The clinical records of 304 patients who were hospitalized for the treatment of LBP in Korean rehabilitation medicine inpatient clinics of five different Korean medicine hospitals were analyzed. The percentage of patient characteristics such as sex, age, average duration of admission, insurance type, diagnosed LBP related disease code, and rates of interventions applied were assessed. Results 1. The female sex was significantly predominant among patients with LBP : 105 patients (34.5%) were male and 199 patients (65.5%) were female. Percentage of the patients' age appeared as followed : 76 people (25.0%) were in their 50s, 64 people (21.1%) were in their 40s, 51 people (16.8%) were in their 30s, 37 people (12.2%) were in their 60s, and 33 people (10.9%) were in their 70s. Approximately half of the total LBP patients investigated were older than 50. 2. The average duration of admission was 16.2 days. Approximately one third (30.3%) of the patients were hospitalized for 8 to 14 days. 3. Female patients tended to stay admitted in hospitals slightly longer than male patients. Elderly (age 60~79) patients stayed in hospitals longer (17.8 days) compared to younger (age 20~39) patients (13.5 days). 4. More than half of the patients (171 cases, 56.3%) had their hospital bills covered with automobile insurance. 40.1% (122 cases) of the patients had medical insurance to cover their hospital bills. The average duration of admission of patients who had automobile insurance was 14.2 days, while that of the patients who had medical insurance was 18.4 days. 5. "Sprain and strain of the lumbar spine and pelvis" was the most commonly used (195 cases, 64.1%) disease code in patients with LBP. Patients diagnosed as "lumbar and other intervertebral disc disorders with radiculopathy" required the longest admission duration (22.1 days). 6. Herbal medication was applied to all of the patients during admission. Acupuncture was applied to all of the patients except one case diagnosed as spinal stenosis. Physical therapy, cupping therapy, moxibustion therapy, chuna therapy, and pharmacopuncture therapy were applied to 94.7, 92.8, 85.2, 83.9, and 49.7% of the patients, respectively. 7. There were certain differences among Korean medicine hospitals in terms of the LBP patients' duration of admission, type of insurance, frequency of the disease code use, type of intervention applied. Conclusions It is thought that the current study can be used as reference data in assessing the current state of LBP treatment in Korean rehabilitation medicine and a basis for future research. Provided improvements of certain limitations of the current study in future researches, such data would act as better base line data in policy decision making.

• KSBB Journal
• /
• v.16 no.4
• /
• pp.321-326
• /
• 2001

The change of molecular weight inside and outside a capsule produced using coencapsulating technology was investigated. Chitosan and chitosanase were enveloped in this membrane and product released was a loaded the medium by the principle of size exclusion. The leakage of substrate corresponding to the agitation speed was controlled by adjusting the alginate and CaCO$_3$ concentrations. The optimal condition of alginate concentration and agitation speed were 0.5% and 40rpm, respectively. Membrane thickness and capsules diameter were 10 $\mu$m and approx. 3.0 - 1.5 mm, respectively. Molecular weight difference by concentration and alginate viscosity were of little significance. In accordance with the molecular weight distribution versus enzyme concentration relationship, low concentration of enzyme produced high molecular weight oligosaccharides. At a 1.5 mm capsule size the product diffusion rate to outer surface highest. The molecular weight distribution of the released oligosaccharides was ranged from 1000 to 6000 Da. More than 80% of the initial activity of encapsulated enzyme retained after 8hrs of reaction.