• Journal of Microbiology and Biotechnology
• /
• v.14 no.6
• /
• pp.1182-1189
• /
• 2004

Cytosine deaminase (cytosine aminohydrolase, EC 3.5.4.1) stoichiometrically catalyzes the hydrolytic deamination of cytosine and 5-fluorocytosine to uracil and 5-fluorouracil, respectively. The intracellular cytosine deaminase from Chromobacterium violaceum YK 391 was purified to apparent homogeneity with 272.9-fold purification with an overall yield of $13.8\%$. The enzyme consisted of dimeric polypeptides of 63 kDa, and the total molecular mass was calculated to be approximately 126 kDa. Besides cytosine, the enzyme deaminated 5-fluorocytosine, cytidine, 6-azacytosine, and 5-methylcytosine, but not 5-azacytosine. Optimum pH and temperature for the enzyme reaction were 7.5 and $30^{\circ}C$, respectively. The enzyme was stable at pH 6.0 to 8.0, and at 30T for a week. About $70\%$ of the enzyme activity was retained at $60^{\circ}C$ for 5 min. The apparent $K_{m}$ values for cytosine, 5-fluorocytosine, and 5-methylcytosine were calculated to be 0.38 mM, 0.87 mM, and 2.32 mM, respectively. The enzyme activity was strongly inhibited by 1 mM $Hg^{2+},\;Zn^{2+},\;Cu^{2+},\;Pb^{2+},\;and\;Fe^{3+}$, and by o-phenanthroline, $\alpha,\;{\alpha}'$-dipyridyl, p-choromercuribenzoate, N-bromosuccinimide, and cWoramine­T. In addition, the enzyme activity was strongly inhibited by I mM 2-thiouracil, and weakly inhibited by 2-thiocytosine, or 5-azacytosine. Finally, intracellular and extracellular cytosine deaminases from Chromobacterium violaceum YK 391 were found to have a different optimum temperature, apparent $K_{m}$ value, and molecular mass.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.3
• /
• pp.96-107
• /
• 1997

This study was carried out to examine the physicochemical characteristics of dredged soils in reservoirs. Surveys and analyses of basic materials were made on 241 of 2,328 reservoirs in Chonbuk province through 2 years from December 1994 to November 1996. The results of this study are summarized as follows : 1. Soils were classified as 15 types according to physical properties, and some soils contain comparatively high percentage of sand and gravel. Considering only soil textures, useful and economical soils as aggregate are approximately 25% in all, and the other soils are arable for farm planting. 2. The results of chemical analyses of soils showed on the average 5.9 in pH, 1.lmmhos/cm in ECe, 14.6me/l00g in CEC, 460.0ppm in T-N, 119.0ppm in T-P, 264.9ppm in K, 134.2ppm in Na, l,335.0ppm in Ca, 575.9ppm in Mg, 486.Sppm in Fe, 57.7ppm in Mn, 3.3ppm in Cu, 21.9ppm in Zn, 0.49ppm in As, 0.34ppm in Cd, 0.O3ppm in Hg, 1.7% in OM, respectively. 3. General chemical components, heavy metals, organic matter contents were analyzed as similar to tlie mean values of common soils, therefore it was considered to be no significant effects on crop growth in the chemical properties. 4. Accodingly, the physicochemical characteristics of soils ought to be analyzed accurately before dredging for effective using of dredged soils. And it will be more effective, if the dredged soils are used with proper balance among each content of components with considering to the physicochemical properties of common soils.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.1
• /
• pp.19-23
• /
• 2018

In a Pb-included piezoelectric composition, $Sr_yPb_{1-y}[(Zn_{1/3}Nb_{2/3})_x-(Ni_{1/3}Nb_{2/3})_{0.2}-(Zr_{0.46}Ti_{0.54})_{0.8-x}]O_3$ was selected in order to attain high piezoelectric properties. According to the PZN ratio (x) and the amount of Sr doping (y), the crystal structure, microstructure and piezoelectric properties were measured and evaluated. In the case of Sr 4 mol% doping, the piezoelectric properties were the highest for a PZN ratio of 0.1. In this condition, the grain size was larger and the intensity was higher. With the PZN ratio fixed and varying the Sr doping, the piezoelectric properties increased until 10 mol% doping and then decreased for over 12 mol% doping. In the case of x＝0.1 and y＝10 mol%, the best piezoelectric properties were obtained, i.e., $d_{33}=660pC/N$ and $k_p=68.5%$, and these values seem to be related to the grain size and crystal structure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.211-211
• /
• 2000

Carbon nanotubes (CNTs) have been spotlighted as one of promising field emission displays(FEDs). For the first time, to authors knowledge, we have developed the 9" color CNT-FEDs with the resolution of 240x576 lines. The 9" CNT-FEDs with diode-type and triode-type structures are presented. The well-dispersed CNT paste was squeezed onto the metal-patterned cathode glass. For the anode plate, the Y2O2S:Eu, ZnS:Ag,Cl low-voltage phosphors were printed for red, green, and blue colors, respectively. The vacuum-packaged panel maintained the vacuum level of 1x10-7 Torr. The uniform moving images vacuum-packaged panel maintained the vacuum level of 1x10-7 Torr. The uniform moving images were demonstrated at 2 V/um. High brightness of 800, 200, and 150cd/m2 was observed on the green, red, and blue phosphors at V/um, respectively. Field emission characteristics of a triode-type CNT-FED were simulated using a finite element method. the resultant field strength on the cathode was modulated by gate bias and emitted electrons were focused on the anode. A relatively uniform emission image was experimentally achieved at the 800V anode. A relatively uniform emission image was experimentally achieved at the 800V anode and the 50-180 V gate biases. Energy distribution of electrons emitted from CNTs was measured using an energy analyzer. The maximum peak of energy curve corresponded to the Fermi energy level of CNTs. The whole fabrication processed of CNT-FEDs were fully scalable and reproducible. Our CNT-FEDs has demonstrated the high potential of large-area and full-color applications with very low cost fabrication and low power consumption.

• Journal of Powder Materials
• /
• v.30 no.2
• /
• pp.130-139
• /
• 2023

Thermoelectric materials and devices are energy-harvesting devices that can effectively recycle waste heat into electricity. Thermoelectric power generation is widely used in factories, engines, and even in human bodies as they continuously generate heat. However, thermoelectric elements exhibit poor performance and low energy efficiency; research is being conducted to find new materials or improve the thermoelectric performance of existing materials, that is, by ensuring a high figure-of-merit (zT) value. For increasing zT, higher σ (electrical conductivity) and S (Seebeck coefficient) and a lower κ (thermal conductivity) are required. Here, interface engineering by atomic layer deposition (ALD) is used to increase zT of n-type BiTeSe (BTS) thermoelectric powders. ALD of the BTS powders is performed in a rotary-type ALD reactor, and 40 to 100 ALD cycles of ZnO thin films are conducted at 100℃. The physical and chemical properties and thermoelectric performance of the ALD-coated BTS powders and pellets are characterized. It is revealed that electrical conductivity and thermal conductivity are decoupled, and thus, zT of ALD-coated BTS pellets is increased by more than 60% compared to that of the uncoated BTS pellets. This result can be utilized in a novel method for improving the thermoelectric efficiency in materials processing.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.50 no.2
• /
• pp.94-102
• /
• 2024

The exact mechanism of sialolith formation has yet to be determined. Recurrence of sialolithiasis is rare, affecting only 1%-10% of patients. The current study presents a case of recurrent stones that occurred twice on the right submandibular gland 6 months postoperative and 7 months after reoperation in a 48-year-old female patient. The stones were analyzed using histology, scanning electron microscopy, energy dispersive spectroscopy, and transmission electron microscopy (TEM). The first stone showed a three-layered structure with a poorly mineralized peripheral multilayered zone, highly mineralized middle layer, and the central nidus. The stones were composed of Ca, C, O, Cu, F, N, P, Si, Zn, and Zr. In TEM, compact bi-layered bacterial cell membrane was found on the peripheral layer and the central nidus of the stone as well as exosomes in the central nidus. The results demonstrated the essential components of sialolith formation, including bacteria, inflammatory exosomes, and exfoliated salivary epithelial cells that cooperatively underwent the pathogenetic progresses of central nidus formation, induction of compact zone calcification of the middle layer, and repeated subsequent deposition in the peripheral multilayer zone. The rapid recurrence could have resulted from residual pieces of a sialolith acting as the nidus of bacterial infection.

• Economic and Environmental Geology
• /
• v.37 no.5
• /
• pp.477-497
• /
• 2004

In the Hongseong and Kwangcheon areas, two ultramafic rocks are exposed as isolated bodies in the Precambrian Kyeonggi gneiss complex. The ultramafic rocks extend for several hundred meters to NNE direction and are contact with adjacent metasediments by steeply dipping faults. The rocks are dunite or harzburgite showing dominantly equigranular-mosaic and protogranular textures with a minor amount of porphyroclastic textures. They contain varying amounts of fosteritic olivine (F$o_{0.91-0.93}$), magnesian pyroxene (E$n_{0.89-0.93}$) and tremolitic to magnesian hornblende with minor amounts of spinel, serpentine, chlorite, magnetite, phlogopite and talc. The rocks are in contrast with adjacent gneiss complex or metabasite (amphibole, biotite, plagioclase, alkali-feldspar and quartz). Geochemically, these ultramafic rocks are characterized by high magnesium number (M$g_#$> 0.88) and transitional element (mainly, Ni>1716 ppm, Cr>1789 ppm), low alkali element (e.g. $K_2$O<0.09 wt.%, Na$_2$O<0.19 wt.%) and depletion of incompatible elements. The calculated correlation coefficients showed good positive correlations among the ferrous (e.g. Sc, V, Zn) elements, incompatible elements (e.g. REE), and among SiO$_2$ or $Al_2$O$_3$ with ferrous elements, whereas negative correlations are appeared between Ni and major elements. These results involve increasing of the ferrous- and $Al_2$O$_3$-bearing minerals(e.g. amphibole and mica) with decreasing of Mg-bearing minerals (e.g. olivine) depending on the degree of alteration. Calculated geothermometries and mineral assemblages suggest that the ultramafic rocks have been metamorphosed through the condition from the greenschist to amphibolite facies. Compared with ultramafic rocks elsewhere, it is thought that those of the Hongseong and Kwangcheon areas are derivatives of the depleted sources since they are depleted in incompatible elements including REE abundances. Moreover overall characteristics of the ultramafic rocks are similar to the those of orogenic related Alpine type ultramafic rocks, especially, shallow mantle slab varieties.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.3
• /
• pp.170-177
• /
• 2004

Agroenvironmental characteristics in paddy fields irrigated with the water of Nagdong river were analyzed along the river watershed for two years from 1999. The sites monitored from upper reaches of the river were Andong, Sangju, Gumi, Goryeong, Changnyeong, Milyang and Pusan. In paddy soils, the contents of heavy metals such as Cd, Cr, Cu, Pb, Ni, Zn and As were around natural values showing the highest values in Pusan followed by Goryeong. In brown rice, the contents of heavy metals were lower than natural values. Soil chemical properties appeared higher values in the lower reaches including Goryeong than the upper ones. The highest parameters in Goryeong were pH ($5.9{\sim}6.1$), EC ($0.8{\sim}0.9\;dS/m$), $Av.P_2O_5$ ($155{\sim}201\;mg/kg$), exchangeable Ca ($6.7{\sim}7.4\;cmol^+/kg$), Mg ($1.92{\sim}2.50\;cmol^+/kg$), K ($0.18{\sim}0.21\;cmol^+/kg$) and those in Pusan were organic matter ($23.0{\sim}29.1\;g/kg$) and T-N ($1.6{\sim}1.8\;mg/kg$). In conclusion, the recommended rates of N fertilizer for rice cropping were 21.4%, 11.8% and 8.8% high for Andong, Sangju and Gumi, respectively and 14.9%, 4.6%, 4.5% and 11.5% low for Goryeong, Changnyeong, Milyang and Pusan, respectively reflecting the chemical properties of soils and the quality of irrigation water on the basis of 110 kgN/ha. In the case of phosphorous, the rates were 18.9% and 33.3% low for Changnyeong and others, respectively on the basis of $45\;kgP_2O_5/ha$. The populations of bacteria, fungi, actinomycetes, Bacillus, fluorescent Pseudomonas and Biomass C were high at the lower reaches including Goryeong, which showed relatively much nutrient contents of organic matter, total N and phosphorous etc.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.949-954
• /
• 2012

This study is conducted to evaluate the effects of chelating agents for improving plant growth and reusing accumulated nutrients in soils of plastic film house. Two experiments were carried out at follows: i) The incubation test was conducted using soils treated with 0, 300 mM of EDTA and DTPA to examine the availability of nutrients. ii) For the pot test, chinese cabbages were cultivated in soils with 0, 0.1, 0.5, 1, and 5 mM of EDTA and DTPA to examine the impacts of plant growth response. The application of chelating agents increased ther availability of soil nutrients in the following order: DTPA > EDTA > control. Inorganic concentration of chinese cabbages in DTPA treatments consderably increased in nitrogen, phosphate, iron and aluminium contents than that of the other treatments. The optimal concentration of DTPA for vigorous plant growth as 0.5 mM. Thus, DTPA was more effective than other chelating agents for healty growth of cabbages and the availability of nutrients accumulated in plastic film house.

• The Korean Journal of Mycology
• /
• v.26 no.4 s.87
• /
• pp.562-573
• /
• 1998

The symbiotic activities of arbuscular mycorrhizal fungi (AMF) by analyzing spore density, symbiosis intensity and vertical distribution of AMF spores, phytomasses of higher plants such as Calamagrostis epigeios, Imperata cylindrica, Artemisia scoparia, Aster tripolium and Sonchus brachyotus, and physico-chemical properties of soil were determined in the rhizospheres of higher plants in abandoned two coastal reclaimed lands, which were constructed in 12 and 30 years ago, respectively. Vertical distribution of the AMF spores in the rhizospheres of higher plants was restricted within 20 cm depth from soil surface, which would be closely related with vertical distribution of root system, water table and soil aeration. Of vertical distribution of soil properties, W.C., A-P and K concentrations were increased as soil depth was lowered. In the coastal reclaimed lands, symbiotic activities of the AMF such as spore density and symbiotic intensity, were conspicuously stimulated by the increase of soil pH value, organic matter and total nitrogen concentrations, but inhibited by the increase of moisture, available phosphorus and sodium concentrations in the rhizosphere soil. Phosphorus absorption by higher plants growing in the reclaimed lands increased by the rise of symbiotic activities of AMF. Since symbiotic activities of AMF were stimulated with decreasing soil phosphorus concentrations, higher plants associated with AMF absorbed a large amount of phosphorus from the soil is low phosphorus concentrations.