• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.11a
• /
• pp.42-45
• /
• 1992

In this study, the structural, dielectric and electrical properties of $0.85Pb(Zn_{1/3}Nb_{2/3})O_3-0.1BaTiO_3-0.05PbTiO_3$ ceramics were investigated with respect to the variations of $La_2O_3$ addition amount. The specimen with 0.2 [wt%] $La_2O_3$ addition amount, which has the coupling constants with the value of $k_p$=44.8[%]. $k_{31}$=25.4[%] and the piezoelectric constant with $d_{31}=100{\times}10^{-12}$[C/N] respectively, exhibits the relatively good values in the applications of electrostriction actuators.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.1
• /
• pp.17-24
• /
• 1978

A field experiment was conducted on a soil where habitual zinc deficiency has been observed, to investigate the effectiveness of two forms of zinc containing fertilizers: zinc enriched fused phosphate and zinc enriched compound fertilizer. The result of present study is summarized as following. 1. The sail used for the study contained relatively large amount of 1N $CH_2COONH_4$ extractable Ca and the pH was 7.03. Available Zn extracted by 0.1 HCl and available $SiO_2$ extracted by NaOAc were 3.35 ppm and 67.7 ppm respectively. 2. In control plots Zinc content of rice plant measured at 20 days after transplanting was 22-23 ppm, which was a little higher than the critical level (20ppm). But at harvesting stage it dropped to 15ppm. 3. The ratios of $P_2O_5/Zn$ and N/Zn tended to lower as the zinc applied to the soil increased. 4. Application of Zinc clearly increased the number of tillers and plant height as compared to the control. It was also observed that the plots received znic headed and matured earlier compared to the control plots by two weeks. 5. Application of zinc increased all of the yield components and the yield of rice. However, there were no statistical differences in yield and yield components among the forms and levels of zinc fertilizers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.410.2-410.2
• /
• 2016

Tandem structure is promising in organic solar cells because of its double open-circuit voltage (VOC) and efficient photon energy conversion. In a typical tandem device, the two single sub-cells are stacked and connected by an interconnecting layer. The fabrication of two sub-cells are usually carried out in a glovebox filled with nitrogen or argon gas, which makes it expensive and laborious. We report a glovebox-free fabricated inverted tandem organic solar cells wherein the tandem structure comprises sandwiched interconnecting layer based on p-doped hole-transporting, metal, and electron-transporting materials. Complete fabrication process of the tandem device was performed outside the glove box. The tandem solar cells based on poly(3-hexylthiophene) (P3HT) and (6,6)-phenyl C61-butyric acid methyl ester (PCBM) can realize a high VOC, which sums up of the two sub-cells. The tandem device structure was ITO/ZnO/P3HT:PCBM/PEDOT:PSS/MoO3/Au/Al/ZnO-d/P3HT:PCBM/PEDOT:PSS/Ag. The separate sub-cells were morphologically and thermally stable up to 160 oC. The high stability of the active layer benefits in the fabrication processes of tandem device. The performance of tandem organic solar cells comes from the sub-cells with an 50 nm thick active layer of P3HT:PCBM, achieving an average power conversion efficiency (PCE) of 2.9% (n=12) with short-circuit current density (JSC) = 4.26 mA/cm2, VOC = 1.10 V, and fill factor (FF) = 0.62. Based on these findings, we propose a new method to improve the performance and stability of tandem organic solar cells.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2251-2253
• /
• 2000

MEMS기술을 이용하여 단층 실리콘 나이트라이드($Si_{3}N_4$) 다이아프램을 제조하고, 이 다이아프램상에 저항성 가열 진공증착법과 고주파 마그네트론 스퍼터링법을 이용하여 차례로 In막과 ZnO막을 증착하고, In의 도핑을 위해 열처리하여 $NH_3$ 가스 감지용 마이크로센서를 제작하였다. 감지막의 열처리온도에 따른 구조적 및 전기적 특성은 XRD, SEM, AFM, 4-point probe 및 Electrometer를 통하여 각각 조사하였다. 제작된 센서의 열처리온도와 인가전력에 따라 $NH_3$ 가스에 대한 감도, 선택성 및 시간응답 특성을 조사하였다. 감지막 두께 3000 ${\AA}$, 열처리온도 400$^{\circ}C$로 제조된 마이크로 센서가 히터 인가전력 366 mW에서 100 ppm의 $NH_3$ 가스농도에서 대하여 16 %, 350 ppm의 가스농도에서 대하여 23 %의 가장 우수한 감도를 나타내었다. 그러나 CO 가스 및 $NO_x$ 가스에 대한 감지특성은 관찰되지 않았다.

• Korean Journal of Microbiology
• /
• v.23 no.3
• /
• pp.177-183
• /
• 1985

Some properties of an extracellular cytosine deaminase produced from Arthrobacter sp.JH-13 were examined after 20-80% of ammonium sulfate fractionation. Among some substrates, this enzyme utilized cytosine and 5-fluorocytosine as a substrate. The optimum pH and temperature for the activity of this enzyme were found to be near 8.0 and $40^{\circ}C$, respectively. The ensyme was more stable in 0.2M of Tris-HCl buffer than 0.2M of potassium phosphate buffer. The enzyme was generally stable below $50^{\circ}C$, but inactivated completely at $70^{\circ}C$. 1mM of $Fe^{3+},\;K^+\;and\;Na^+$ increased the enzyme activity, but 0.01mM of $Co^{2+},\;Cu^{2+},\;Ni^{2+},\;Hg^{2+},\;Ag^{2+},\;Zn^{2+},\;Ba^{2+},\;and\;Mg^{2+}$ markedly inactivated the enzyme activity. 0.1mM of p-chloromercuribenzoate, trichloroacetic acid, and N-ethylmaleimide compleyely inhibited the enzyme activity, but 0.1mM of 2-mercaptoethanol slightly increased the enzyme activity.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.29-35
• /
• 1986

An empirical formula for semiconductive metal oxides is proposed relating nonstoichiometric value x to a temperature or an oxygen partial pressure such that experimental data can be represented more accurately by the formula than by the well-known Arrhenius-type equation. The proposed empirical formula is log x = A + $B{\cdot}1000/T\;+\;C{\cdot}$exp$(-D{\cdot}1000/T)$ for a temperature dependence and $log\;{\times}\;=a\;+b{\cdot}log\;Po_2\;+\;c{\cdot}$exp$(-d{\cdot}log\;Po_2)$ for an oxygen partial pressure dependence. The A, B, C, D and a, b, c, d are parameters which are evaluated by means of a best-fitting method to experimental data. Subsequently, this empirical formula has been applied to the n-type metal oxides of $Zn_{1+x}O,\; Cd_{1+x}O,\;and\;PrO_{1.8003-x}$, and the p-type metal oxides of $CoO_{1+x},\; FeO_{1+x},\;and\;Cu_2O_{1+x}$. It gives a very good agreement with the experimental data through the best-fitted parameters within 6% of relative error. It is also possible to explain approximately qualitative characters of the parameters A, B, C, D and a, b, c, d from theoretical bases.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.1
• /
• pp.15-21
• /
• 2004

Objectives of this study were to monitor the distribution of heavy metals, to compare extractable heavy metal with total content and to investigate the relationships between soil physico-chemical properties and heavy metals in orchard soil. Sampling sites were 48 in Gyeonggi, 36 in Gangwon, 36 in Chungbuk, and 44 in Chungnam, Soils were collected farm form two depths, 0 to 20 and 20 to 40 cm (here after referred to as upper and lower layers) from March to May in 1998. Total contents of heavy metal in soils were analyzed by ICP-OES after acid digestion ($HNO_3$:HCl:$H_2O_2$) whereas extractable contents were measured after successive extraction of 0.1N-HCl, 0.05 M-EDTA, and 0.005 M-DTPA. Mercury was analysed by mercury atomizer. The average contents of Cd Cu, and Pb in the extractant with 0.1N-HCl at upper layer were 0.080, 4.23, and 3.42 mg/kg, respectively. As content in the extractant with 1N-HCl was 0.44 mg/kg, and total contents of Zn, Ni and Hg were 78.9, 16.1, and 0.052 mg/kg, respectively. The ratios of concentrations of heavy metals to threshold values (Cd 1.5, Cu 50, Pb 100, Zn 300, Ni 40, Hg 4 mg/ke in Soil Environmental Conservation Act in Korea (2001) were low in the range of $1/2.5{\sim}1/76.9$ in orchard soils. The ratios of extractable heavy metal to total content ranged $5.4{\sim}9.21%$ for Cd, $27.9{\sim}47.8%$ for Cu, $12.6{\sim}21.8$% for Pb, $15.8{\sim}20.3%$ for Zn, $5.3{\sim}6.3%$ for Ni, and $0.7{\sim}3.6%$ for Zn, respectively. Cu and Pb contents in 0.05 M-EDTA extractable solution were higher than those in the other extractable solution. Total contents of Cd, Ni and Ni in soils were negatively correlated with sand content but positively correlated with silt and clay contents. Ratios of extractable heavy metal to total content were negatively correlated with clay content but ai and Ni contents were positively correlated with soil pH, organic matter, and available phosphorous. Therefore, the orchard soil was safe because the heavy metal contents of orchard soil were very low as compared to its threshold value in the Soil Environmental Conservation Act. However, it need to consider the input of agricultural materials to the agricultural land for farming practices for assessment of heavy metals.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.721-727
• /
• 2002

In order to overcome trade-off among compositions, process and properties of the glasses with high PbO-base composition for PDP Rib, we studied glass crystallization and crystallization kinetics by Differential Thermal Analysis(DTA). Glass powder was obtained through melting/cooling/grinding, with 3 wt%TiO2 addition for the crystal nucleation and growth in $62PbO-19B_2O_3-10SiO_2-9(Al_2O_3-K_2O-BaO-ZnO)$(in wt%) composition glass. This powder was heat-treated for 1 to 10 h at $445^{\circ}C$ for nucleation. DTA measurements were performed to obtain the crystallization peak with $5∼25^{\circ}C/min$ heating rates. DTA crystallization peak temperature increased with increasing the heating rate and decreased with increasing the heating time. Because the Avrami parameter (n) was approximately 1, the surface crystallization occurred. The maximum nucleation time was 2 h.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.381-387
• /
• 2004

Recently developed Plasma Display Panels (PDP) require phosphors of high luminance at Vacuum Ultraviolet (VUV) excitation. The present investigation developed new PDP phosphors using combinatorial chemistry method. We applied T $b^{3+}$ -activated yttrium gadolinium phosphates system to our combinatorial fine-tuning technique. As a result, the optimum composition was determined to be (G $d_{0.74}$ $Y_{0.11}$T $b_{0.15}$) $P_{1.15}$ $O_{\delta}$ through the two-step combinatorial screening process including excess phosphorous and Gd replacement. We found that the sample of the optimum composition shows a higher luminescence efficiency at VUV excitation and a shorter decay time than the commercially available Z $n_2$ $SiO_4$:Mn phosphor.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1281-1282
• /
• 2008

Low cost TCO(Transparent Conductive oxide) thin films were prepared by 3" DC/RF magnetron sputtering systems. For the AZO preparation processes a 99.99% AZO target (Zn: 98 wt.%, $Al_2O_3$: 2 wt.%) was used. In order to verify feasibility of the AZO thin films to organic light emitting device (OLED) application, test organic light emitting device was fabricated based on AZO as TCO, TPD as hole transporting layer (HTL), Alq3 as both emitting layer (EML) and electron transporting layer (ETL), and aluminium as cathode, where the both ITO and AZO surfaces were treated using $O_2$ RF plasma. The I-V characteristics of the AZO/TPD/Alq3/Al OLEDs were evaluated. As the results, the performance of the OLEDs with AZO as transparent conducting anode could be useable.